Know someone who needs a fun holiday gift that brings sparkle, glam and bling to their outfit? These gift ideas uses the sparkle of Swarovski® crystals and pearls. Gift some exciting DIY jewelry that’ll make her shine! Here are some ideas to get you started:

1. Swarovski Aquarmarine
2. Swarovski Raindrop Pendant
3. Memory Wire Wrap Bracelets with Swarovski Fine Rocks Beads
4. Classic Crystal Hoop Earrings
5. Adjustable Bracelets with Swarovski Crystals
6. Rhinestone Chain Bracelet
7. Pearl Jewelry, a Classic Trend
8. How to Use Pinch Bails with Swarovski Pendants

We’ve got FOUR easy projects using November’s Swarovski Psychology of Color: Emerald. Design lovely jewelry with this hue!

Emerald and Pearl Stretch Bracelet

Items used in bracelet: SW00062 (11), SW00665(11), Z001355 & A021634

Directions

1. Cut 9 inches of stretch cord. Pull on elastic to loosen the elasticity.
2. Slide on the stretch cord emerald crystal, gold disc, pearl and gold disc.
   1. Repeat sequence another ten more times.
3. Make a surgeon’s knot with the elastic.
4. Optional: Add a dot of glue.
5. Cut off excess elastic.

Emerald & Pearl Drop Earrings

Items used in earrings: SW00061 (2), SW00666 (2), CH00724, X001505, A021657, Z012031, A015821 & Z002570

Directions

1. Cut two pieces of beading chain at 1 and 3/4 inches. (You can cut it shorter or longer for your length preference.)
2. Glue a memory wire end to one end of the beading chain. Repeat again for other beading chain. Let it dry for a few minutes.
3. Slide on the beading chain: pearl, silver disc and emerald crystal. Repeat again for other beading chain.
4. Slide end cap on beading chain and using your fine nose pliers, crimp the end cap. Repeat again for other end cap and beading chain.
5. Open earwire loop, slide on end cap loop and close loop. Repeat again for other dangle.

Emerald Teardrop Earrings

Items used in earrings: A008182 (or CH01090), SW01994 (2), A008799, Z07856 & Z003694.

Directions

1. Cut two chain pieces at 1 inch. Make sure both chain has the same amount of links and has an even number.
2. Open oval jump ring, slide through one end of your chain and emerald pendant
3. Open small jump ring, slide through other end of chain and through earwire loop.
4. Repeat Steps 2 & 3 for other earring.

Emerald & Acetate Earrings

Items used in earrings: Z013607, Z010571, Z011522, A019600, SW00167 (2) & Z001831

Directions

1. Open jump ring, slide through acetate hole and disc hole. Close jump ring.
2. Open eyepin loop, slide through other hole of gold disc, close loop.
3. Slide an emerald bicone crystal on the eyepin and make a simple loop.
4. Open loop you just made, slide through ear wire loop and close loop.
5. Repeat all steps for other earring.

For November, Swarovski’s Psychology of Colors is Emerald. Check out how powerful and grounding this hue is!

Embrace your own life balance with this month’s color, Emerald. When you design with Emerald, its elegant hue is refreshing. Emerald is a color loved by many through the ages. Here are some Swarovski colors to match this statement hue:

• Emerald
• Eden Green Pearls
• Erinite
• Crystal Iridescent Green
• Crystal Iridescent Tahitian Look
• Royal Green
• Fern Green

Check out our other blog post with designs using Swarovski Emerald!

Swarovski Psychology of Color: Emerald

We have a show stopping DIY craft for you this holiday season. Make a stunning, sparkly beaded holiday wreath with beads!

Inspired by Martha Stewart, because she is the Queen of DIY, we followed the video instructions to her Holiday Druk Bead Wreath to create our own! For our version, we’re using different beads and findings, but using the same process.

What you’ll need for wreath:

• 8 Inch foam wreath from your local craft store. (We got ours from Joann Fabric.)
• Red Wide Satin Ribbon (Also got this from Joann Fabric)
• 1 Inch Brass Headpins – 5 packs of A019663
• 10mm Red Chinese Crystals – 6 packs of A016817
• Super New Glue – A015821

As a note, you can use different color and size Chinese Crystals. You can also use other kinds of beads, such as Satin or Miracle beads,  Swarovski Crystals or Pearls,  Gemstone Beads or even some wood beads. The ideas are limitless. One thing to keep in mind is to make sure to have a similar ribbon color to match the beads you will be using. If you have a variation of colors, testing on white or black ribbon would work. You can also use a variation of sizes from 4mm to 12mm beads in your wreath.

Directions:

1. Wrap your wreath with ribbon all the way around. Secure the end with a pin. (You can use crafting glue to help secure your ribbon in place.)
2. Cut all your headpin tips at an angle. This will help you push through the ribbon and foam. (Martha Stewart colored her pin tips with red nail polish or paint. You can if you want, we opted out of this option.)
3. Slide a bead onto a headpin, dip the tip into your glue and push headpin into your wreath. You may need to twist the headpin sometime to punch through the ribbon.
4. Repeat and stagger your beads throughout. (You only need to fill the front side of your wreath and not the back. However, you can if you would like to.)
5. Finish it off with a ribbon bow and a loop of ribbon (pinned and glued to the back).

Have a Happy DIY Holiday!

Look your best with a DIY Rhinestone Chain Bracelet with an adjustable sliding clasp. Here are items you’ll need to make your own:

• 1 foot of 4mm Rhinestone Chain – CH00238 (Gold CH00239)
• 2 – 4mm Rhinestone Chain End Connector – Z008775 (Gold  Z008785)
• Silver Rollo Chain Bracelet Sliding Clasp – Z012151 (Gold Z012152)
• Flat Nose Pliers
  Or
• Optional: Nylon Pliers or Serrated Pliers

Directions:

1. Cut rhinestone chain to consist of 18 -20 rhinestones.
2. Cup the last rhinestone with the end connector.
3. Using flat nose pliers, nylon pliers or serrated pliers, gently push down the two prongs of the end connector to secure chain end.
4. Repeat Step 3 to other chain end.
5. Open both jump rings on the adjustable bracelet sliding clasp and set aside.
6. Cut 2 inches off  both open ends of the sliding clasp chain. (This will shorten your bracelet sliding clasp.)
7. Slide back on the jump ring onto the sliding clasp chain and through a loop of the end connector. Close jump ring.
8. Repeat Step 7 to other sliding clasp chain end and end connector.

We have three exciting projects using September’s Swarovski Psychology of Color: Peridot. See how to energize yourself with this natural hue!

Peridot Wheel Pendant with Ball Chain Necklace

We designed a simple beaded wheel with round Peridor Shimmer crystals. Check out the simple TUTORIAL and all you need to make this Peridot Wheel Pendant on a a ball chain necklace!

What you’ll need:

• 4mm Round Crystal – SW02058 (12)
• 8/0 Silver Seed Bead – SB00106 (1 tube or 12 8/0 seed bead)
• 20mm Quick Link Rings – Z010632
• Crystal Fireline Beading Thread (Z006587/Z006585)
• Needle
• 1.5mm Ball Chain (2-3 feet)
• Silver Ball Chain Connector (Z004792)
  AND
• Peridot Wheel Pendant PDF Downloaded Tutorial

Brushed Peridot Earrings

Make your Peridot colors POP with brushed silver beads and components!

Items used in earrings: SW02060 (2), SW02058 (2), Z018411, A019694, A019606, Y018086 and TC02297.

1. On a headpin, slide on a 4mm crystal, 8 wavy disc (alternating them so it creates a wavy look) and an 8mm crystal. Make a simple loop.
2. Open eyepin loop, slide on loop from step 1, close eyepin loop.
3. On eyepin, slide on brushed silver bead and make a simple loop.
4. Open earwire loop and slide on brushed silver loop. Close loop.
5. Repeat all steps for other earring.

Swarovski: Peridot Passion

This sample and tutorial comes from our friends at Swarovski: Create Your Style, called Peridot Passion. You see how stunning Peridot looks with brass findings!

What you’ll need for necklace:

• SW02060 (13)
• SW02059 (7)
• Vintaj Pattern Leaf in Natural Brass
• 4mm Cable Chain in Natural Brass (Our recommendation CH00514 or A008181)
• TC00710 (8)
• Z016115
• TC01256 (7)
• TC00547 (1)
• Z006523

Instructions

1. Cut the chain into fifteen 1 ½” pieces and set aside.
2. Using one eye pin slide on one 6mm Crystal, one 8mm Crystal and one 6mm Crystal and make a simple loop. Repeat this step 5 more times and set aside.
3. Using one eye pin slide on one 6mm Crystal and make a simple loop. Set aside.
4. Using one head pin slide on one 8mm Crystal and make a simple loop. Set aside.
5. Using the leaf pendant attach seven of the 5mm jump rings across the top of the opening.
6. Using the 1st jump ring on the left of the top of the leaf pendant attach one piece of chain, then attach one 9mm jump ring, then attach another piece of chain. Now attach one component made in Step 2 and to the other side of the component attach another piece of chain. Repeat this pattern two more times and then attach the lobster clasp with a 5mm jump ring.
7. Using the last jump ring on the right of the top of the leaf pendant attach one piece of chain, then attach to the 7.25mm jump ring already on the left of the necklace, then attach another piece of chain. Now attach one component made in Step 2 and to the other side of the component attach another piece of chain. Repeat this pattern two more times and then attach one 9mm jump ring.
8. Using the component made in Step 3 attach one end of this component to the bottom middle of the 9mm jump ring hanging above the leaf pendant. Now attach the component made in Step 4 to the bottom of the 6mm bead.

We have three lovely projects using August’s Swarovski Psychology of Color: Rose Water Opal.

Beaded Fan Necklace with Swarovski Crystals

Items used in necklace: (12) SWZ0469, SB00107, SB00423, A021148, A006585, A015211, A011519, (2) CH01096

Get FREE Downloadable PDF Pattern Tutorial Here!

Gold & Silver Rose Opal Earrings

Items used in earrings: (4) SWZ0469, SB00423, A011519, Y018889, Z010751, A007659, A011528, Z012031

We mixed up the fun in this pair of earrings with gold and silver findings. It adds stunning layers and surely makes the crystals stand out!

Directions:

1. On a headpin, slide on a gold seed bead, bicone and another seed bead.
2. On an eyepin, slide on a gold seed bead, bicone and another seed bead.
3. Open loop from Step One and slide on brushed ring link. Close loop.
4. Open gold jump ring, slide on brushed ring link and one hole of gold brushed disc. Close jump ring.
5. Open a loop of link from Step Two, slide on other hole of gold brushed disc and close loop.
6. Open earwire loop and slide on other end of crystal link and close earwire loop.
7. Repeat all steps for other earring.

Rose Water Rhapsody

Our friends at Swarovski Create your Style, designed this stunning necklace with Rose Water Opal crystals and Fine Rocks Tube beads.

What you’ll need:

• (24) 3mm Rose Water Opal Bacon Crystal
• (88) SWZ0469
• (44) SWZ0470
• (42) SW01900
• (6) SW01902
• (2) SW02020
• (1) SW01733
• (3) 14x10mm Rose Water Opal Fancy Stone
• (3) 14x10mm Rhodium Plated Fancy Stone Setting
• (1) TC01871
• (6) TC00278
• (3) TC01253
• (2) TC00853
• (2) TC01899
• (1) FTBW0001
• SW01830
• Alcohol Wipes

Directions:

1. Using alcohol to wipe clean all the findings and set to dry.
2. Using one fancy stone, blue in matching setting and set aside for 24 hours to dry. Repeat two times and set aside.
3. Using one eyepin, attach one pendant made in Step 2, then slide on a bead cap, on SW02020 and another bead cap. Make a simple loop. Repeat one more time and set aside. Repeat one more time and set aside.
4. Using another eypin, attach one pendant made in Step 2, then slide on a bead cap, on SW01733 and another bead cap. Make a simple loop.
5. Cut beading wire into two 20″ pieces.
6. Using both wires together, slide on a SW01902, component made in Step 3, SW01902, SWZ0469, SWZ0470, SWZ0469, SW01902, one component made in Step 4, SW01902, SWZ0469, SWZ0470, SWZ0469, SW01902, component made in Step 3, and SW01902. Position all these in the center of the two strands of wire.
7. Take all remaining 4mm bicone beads and pour them onto your bead mat. Mix them all together.
8. Starting with the right side of the necklace and only using one of the two wires coming out of the 6mm bicone bead, string on three 3mm bicone beads. Now using your bead mix you created in Step 7 randomly string on 42 4mm bicone beads. String on three 3mm bicone beads. Repeat for this step for the second empty wire.
9. Using both wires, slide on one crimp bead and one end of the toggle. Crimp to close and add crimp cover.
10. Repeat Steps 8-9 to make left side of the necklace.

We recently got new Chinese Crystals in and So personally favors the opaque crystals. Here is a pair of earrings she made that looks like firecrackers!

What you’ll need for earrings:

• Earwire
• Bali Chandelier Earrings (Y013697)
• 1.5″ Headpins (A019647)
• 4mm Chinese Crystal Rondelle 
• 8/0 Silver Seed Bead (SB00106) – This item is optional.
  OR
• Components list of items used in earrings example: TC02297. Y013697, A019647, Z013491, Z013499, SB00106

Directions: (Seed beads are optional)

1. On a headpin, slide on two red beads, one yellow and one seed bead. Make a simple loop. Open loop and slide on first hole on earring finding.
2. On another headpin, slide on three red beads, two yellow and one seed bead. Make a simple loop. Open loop and slide on second hole on earring finding.
3. On another headpin, slide on four red beads, three yellow and one seed bead. Make a simple loop. Open loop and slide on third hole on earring finding.
4. Repeat Step 2 and slip onto fourth hole on earring finding.
5. Repeat Step 1 and slip onto last hole on earring finding.
6. On another headpin, slide on a yellow bead and make a simple loop. Open loop and slide through the inner hole of earring finding.
7. Open earwire loop and slide through top hole of earring finding. Close loop.
8. Repeat all steps for other earring.

Make this Golden Halo Earrings, tiered with TierraCast® components, acetate and Swarovski® crystals.

What you’ll need for these pair of earrings:

• Acetate Half Circle (earrings use Z012461)
• 8mm Gold Jump Ring (earrings use A011523)
• (2) TierraCast® 19mm Gold Hammertone Ring (earrings use TC00611)
• Earwire Findings (earrings use TC02298)
• (2) Swarovski® 16mm Princess Cut Crystal Pendant (earrings use SW02167)
  OR
• Buy All Products with BAP0005

Directions:

1. Open jump ring, slide on crystal pendant and bottom hole of acetate. Close jump ring.
2. Open another jump ring, slide on top hole of acetate and hammertone ring. Close jump ring.
3. Open earwire loop and slide on hammertone ring. Close loop.
4. Repeat all steps for other earring.

Make festive and fancy Snowflake ornaments with GoodyBeads’ Master Mixes with 4mm bicone crystals in today’s tutorial.

Christmas may be a few month away, but you can never be too early to prep for the holidays. Plus, making these snowflake ornaments can be used and displayed all year round. Hang them on your window or as an outdoor mobile, you can surely get some twinkling reflections on a sunny summery day.

What you’ll need for ornament:

• 4 1/2″ Snowflake Ornament Forms (Z009715)
• 8/0 Miyuki Seed Beads  (sample uses SB00107)
• GoodyBeads’ Master Mixes  (sample uses MX00009)

Directions:

1. The FIRST thing to do is separate out your Mix. Each mix will have 5 different crystal color. Once you have your piles, create a crystal/color sequence of how your want to snowflake to look. A suggestion is to make piles of graduating colors from dark to light. You can see a closeup of how our sample looks.
   
2. On each spoke, slide on the following:
   Three seed beads, 1st crystal, two seed beads, 2nd crystal, two seed beads, 3rd crystal, seed bead, 4th crystal, seed bead, 5th crystal and three seed beads.
3. Make a simple loop at the end of your spoke.
4. Skip a spoke and repeat steps 2 & 3 to that spoke.
5. Skip another spoke and repeat steps 2 & 3 to that spoke. (You want to fill in every other spoke so that your design will sit evenly.)
6. For all the other spokes, repeat steps 2 & 3.
7. Repeat for other snowflakes.

Make sure to check out our other Snowflake Blogs:

• Seed Bead Snowflake
• Snowflake Ornament

So Vang has conjured up another super simple pair of earrings using Czech Ginko Two Hole Beads. Free downloadable pattern tutorial.

These pair of earrings are easy to make with minimal amounts of components. You can make a load of Ginko Fan Earrings with a tube of 11/0 Seed beads and Ginko Beads!

Ginko Fan Earrings

So Vang had a few beads from her previous Ginko Scale Bracelet, so she used them here to make these earrings to possibly match the bracelet!

What you’ll need:

• Czech Ginko Beads
• 11/0 Seed Beads
• 4mm 22 Gauge Jump Rings
• Earwire Findings
• Fireline Beading Thread and Needle
  AND
• Ginko Fan Earrings PDF Pattern Tutorial

Items used in Ginko Fan Earrings above: SB03708, SB00422, A002413, TCZ0078, A006585, A015211 

Ginko Fan Earrings with Swarovski® Crystals

Embellish your fan earrings with a link of Swarovski crystals. Doll up your earrings and sparkle!

What you’ll need for earrings:

• Czech Ginko Beads
• 11/0 Seed Beads
• TWO 4mm Swarovski Bicone Crystals
• 24-Gauge Eyepin (Silver/Gold)
• Earwire Findings
• Fireline Beading Thread and Needle
  AND
• Ginko Fan Earrings PDF Pattern Tutorial

Items used in Ginko Fan Earrings with Swarovski Crystals above: SB03697, SWZ0581(2), SB00422, A019595, Z012031, A006585, A015211 

New from the 2019 Tucson show are these lovely Czech Ginko beads from BeadSmith. Check out today’s free tutorial using Ginko beads.

Czech Ginko beads are a two-hole bead in the shape of Ginkgo leaves.

Scale Bracelet

This bracelet tutorial was inspired by Nela Kábelová’s (www.gianelle.beadforum.cz) pattern called Snake Skin Bracelet. We used her pattern and tweaked it slightly to add 4mm Swarovski® bicone crystals instead of 4mm round beads. And used 8/0 Miyuki seed beads in place of the seed beads she used. Don’t they look like fish scales? Dragon scales? Mermaid scales? They are a beautiful shape with lots of option for bead stitching.

What you’ll need for this bracelet:

• Ginko two-hole beads
• 8/0 Miyuki Seed Beads
• (36) 4mm Swarovski bicone crystals
• 5mm jump ring
• Clasp
• Fireline Beading Thread
• Needle
• Ginko Scale Bracelet Tutorial PDF

Items used in bracelet above: SB03708, SW02072 (36), A008804, A019945, A006587, A015211, SB00117 or SB00063

An easy tip to using various beads is linking them to make a beaded chain. Here are two easy necklaces linking up Chinese Crystal beads, metal beads and inch long chain.

Preparing Bead Links

With the help of eyepins, make a fun amount of links by sliding a bead unto the eyepin and making a simple loop.  And then cut chain into inch long pieces. These chain links will be the connectors between each beaded link.

See how versatile these beaded links are. Link up a sequence of a bead and chain or mix up the sequence for an organic look.

Make sure to try out different beads, sizes and shapes for a full beaded chain link.

Items used in images and tutorial: A019612, A016467, A002937, Z009196, CH00533

Gold and Silver Tiered Necklace

We linked three different sequence of beaded chain to make a three-tiered necklace on an adjustable necklace chain.

1. First link includes the following beaded link: gold tube, silver oval, gold tube, cube crystal, gold tube, silver, oval, gold tube, cube crystal, gold tube, silver, oval, gold tube, cube crystal, gold tube, silver, oval, gold tube.
2. Second link includes the following beaded link: chain, gold tube, cube crystal, gold tube, cube crystal, gold tube – Repeat TWO more times. And add a chain link at the end.
3. Third link includes the following beaded link: chain, cube crystal, silver oval – Repeat FIVE more times. And add a chain link at the end.
4. Open one jump ring from adjustable necklace chain and slide on all three beaded chain links. Close jump ring.
5. Repeat to other jump ring on adjustable necklace chain.

Items used in necklace: A019612, A016467, A002937 (3), Z009196, CH00533 (2)

Black and Gold Tassel Necklace

Instead of using eyepins, we made wrapped loops to connect each bead and chain. Check out previous blog on wrapped loops and linking them.

1. Cut 6 link at an inch long. Cut one link at 12 inches long.
2. Chain link a flat brass bead, 14mm Chinese Crystal bead and flat brass bead with chain link.
   
3. Sequence of beaded chain link: chain, flat brass, crystal, flat brass, chain, flat brass, crystal, flat brass, chain, flat brass, crystal, flat brass and 12 inch chain
4. Next sequence will link to the other side of 12 inch chain: flat brass, crystal, flat brass, chain, flat brass, crystal, flat brass, chain, flat brass, crystal, flat brass, chain.
5. Make a wrapped loop and slide on both chain ends before completing wrapped loop. Slide on crystal bead and make another loop, while sliding on Tassel Pendant (Z001347).
   

Items used in necklace tutorial: Z001347, CHZ0093 (2),  A022212, A016851, AW00026,

Swarovski fine rocks tube beads are the envy of every jewelry-makers’ supply. Here are three simple and modern projects to get you started.

Swarovski fine rocks tube bead comes in two sizes: 15mm and 30mm. As well as multiple color options. These tube shape beads are layered with pavé crystals with a metallic and crystal shine. Here are three simple projects using Swarovski fine rocks tube beads.

Pretty Rockin’ Bracelet

This gorgeous bracelet is made with an adjustable bracelet slider clasp. Using few components to make one bracelet, you’ll see how easy it is to want to make a whole bunch of them!

Items used in bracelet: SW01962, Z002570, WR00033, Z012151

1. Start with a 4 inch piece of 22-Gauge wire. Make a wrapped loop at one end.
2. Slide silver spacer, crystal tube and silver spacer on wire. Make a wrapped loop.
3. Open jump ring from one side of slider clasp and slip on end of crystal tube link. Close jump ring.
4. Repeat to the other jump ring on slider clasp.

Midnight Blush Earrings

We spruced up this wickedly awesome pair of earrings with silver coiled spacers and Swarovski classic cut crystal pendants.

Items used in earrings: SW01965 (2) SW01748 (2), SW01906 (4), A002413, A001495, A003564, TCZ0078

1. Open jump ring, slide on classic crystal pendant and close jump ring.
2. Open eyepin, slide on jump ring from step one and close eyepin.
3. Slide the following onto the eyepin and make a simple loop: 4mm bicone crystal, spacer, crystal tube, spacer and bicone crystal.
4. Open earwire loop, slide on tube dangle and close loop.
5. Repeat all steps for other earring.

Crystal Rock Drop Necklace

Jam out to some hoppin’ holiday music with this Crystal Rock Drop Necklace.

Items used in necklace: Z003715, A001495, A003564, SW00114 (2), SW01825, SW01896, SW01970, TC00446, SW01830

1. Mix equal amounts of the Two-Part Epoxy.
2. Dab a drop into the crystal setting. Lay raindrop fancy stone into setting. Let it dry for at least an hour before assembling necklace.
3. Open eyepin and slide on raindrop stone dangle. Close eyepin.
4. On the eyepin, slide on the following and make a simple loop: bicone crystal, spacer, crystal tube, spacer and bicone crystal.
5. Open top loop, slide onto bail loop and close loop.
6. Open clasp of necklace chain and slide on bail.
7. Necklace complete.

We have an easy DIY project for you that makes creating bracelets even easier. With the Adjustable Bracelet Sliding Clasp, all you need to add is your favorite link! This project consists of sparkling Swarovski Crystals and two simple ways to incorporate them with the adjustable bracelet finding!

Adjustable Bracelet Sliding Clasp

The Adjustable Bracelet Sliding Clasp comes in two different chain types in gold, silver or rhodium finishes. These findings come in wheat or rollo chain, with a sliding clasp that easily moves to adjust to your wrist size and jump rings that make attaching links, beads, connectors and more a breeze.

You can get these clasps in:

• Silver Plated (Z012151 & Z012176)
• Gold Plated (Z012152 & Z012178)
• Rhodium Plated (Z012153 & Z012150)

Tutorials for Swarovski Crystal Bracelets

Link Swarovski Sew-On Stone Crystals with jump rings. We opened one of the jump rings on the chain and slid on one end of the crystal. Do the same to the other jump ring. Link a large sew-on crystal with 5mm oval jump rings. This bracelet is all set and ready to wear!

Items used for bracelet: Z012178, SW01804 (Qty 2), SW01805, A008801

We can’t get enough of the Swarovski Fine Rocks Tube Crystal! We used 22-Gauge wire, cut a 3″ piece and made a wrapped loop on one end. Slide on a silver disc spacer (Z002570), tube crystal and another spacer. Made another wrapped loop to finish off the link! We love the jump rings on the clasp because you can easily open the jump rings and attach your tube crystal!

Items used for bracelet: Z012151, SW01740, Z002570, AW00031