We’ve got FOUR easy projects using November’s Swarovski Psychology of Color: Emerald. Design lovely jewelry with this hue!

Emerald and Pearl Stretch Bracelet

Items used in bracelet: SW00062 (11), SW00665(11), Z001355 & A021634

Directions

1. Cut 9 inches of stretch cord. Pull on elastic to loosen the elasticity.
2. Slide on the stretch cord emerald crystal, gold disc, pearl and gold disc.
   1. Repeat sequence another ten more times.
3. Make a surgeon’s knot with the elastic.
4. Optional: Add a dot of glue.
5. Cut off excess elastic.

Emerald & Pearl Drop Earrings

Items used in earrings: SW00061 (2), SW00666 (2), CH00724, X001505, A021657, Z012031, A015821 & Z002570

Directions

1. Cut two pieces of beading chain at 1 and 3/4 inches. (You can cut it shorter or longer for your length preference.)
2. Glue a memory wire end to one end of the beading chain. Repeat again for other beading chain. Let it dry for a few minutes.
3. Slide on the beading chain: pearl, silver disc and emerald crystal. Repeat again for other beading chain.
4. Slide end cap on beading chain and using your fine nose pliers, crimp the end cap. Repeat again for other end cap and beading chain.
5. Open earwire loop, slide on end cap loop and close loop. Repeat again for other dangle.

Emerald Teardrop Earrings

Items used in earrings: A008182 (or CH01090), SW01994 (2), A008799, Z07856 & Z003694.

Directions

1. Cut two chain pieces at 1 inch. Make sure both chain has the same amount of links and has an even number.
2. Open oval jump ring, slide through one end of your chain and emerald pendant
3. Open small jump ring, slide through other end of chain and through earwire loop.
4. Repeat Steps 2 & 3 for other earring.

Emerald & Acetate Earrings

Items used in earrings: Z013607, Z010571, Z011522, A019600, SW00167 (2) & Z001831

Directions

1. Open jump ring, slide through acetate hole and disc hole. Close jump ring.
2. Open eyepin loop, slide through other hole of gold disc, close loop.
3. Slide an emerald bicone crystal on the eyepin and make a simple loop.
4. Open loop you just made, slide through ear wire loop and close loop.
5. Repeat all steps for other earring.