We’ve got THREE easy projects using October’s Swarovski Psychology of Color: Sapphire. Design bold and confident jewelry with this hue!

Sapphire Ombré Bracelet

Items used in bracelet: CH00724 (10″), TC01897 (4), Z008576, SW00072 (15), SW02049 (8) and SW00001 (8). Tool: Magical Crimping Pliers

This bracelet is designed using our popular beading chain, 2mm crimps and slide on clasp. We’ve also used Magical Crimping Pliers to finish the crimps! Check out how to use this tool in our BeadSmith Magical Crimping Pliers blog post.

1. Slide beading chain through slide on clasp.
2. On the beading chain, slide on the following:
   Crimp tube, 3 clear crystal, 1 light sapphire, one clear, 2 light sapphire, 1 sapphire, 1 light sapphire, 11 sapphire, 1 light sapphire, 1 sapphire, 2 light sapphire, 1 clear, 1 light sapphire, 3 clear crystal and crimp tube.
3. Slide chain through slide on clasp in the same direction you did in step one.
4. Center beads and make a crimp on both ends of your crystals with magical crimping pliers. Make sure to leave a gap so that the crystals lay nicely and not too rigid on the chain.
5. Slide bracelet over the larges width of your hand and cut excess chain ends if needed.
6. Add a crimp to both ends of the beading chain and make a crimp with the magical crimping pliers.

Sapphire Icicle Earrings

Items used in earrings: SW00183 (2), SW00182 (4), SW00181 (2), SW02088 (2), SW00634 (2), TCZ0078, A001495, A019697, TC00006 (4) and TC00032 (2).

1. On headpin, slide on the following and make a simple loop:
   8mm bicone, 5mm spacer, 2 6mm bicone, 4mm spacer and 4mm sapphire bicone.
2. Open eyepin loop, slide on crystal dangle from Step 1 and close loop.
3. On the eyepin, slide on the following and make a simple loop:
   4mm sapphire, 4mm spacer, 4mm light sapphire and 3mm crystal.
4. Open earwire loop, slide one crystal dangle and close loop.
5. Repeat all steps for other earring.

Swarovski Sapphire Bracelet

Our friends at Swarovski: Create Your Style has this stunning bracelet made with classic cut crystal pendants!

What you’ll need for bracelet:

• Z009912 (4)
• 23mm Heavy Hammered Ring Sterling Silver Plated – Vintaj® PT198-040 (4)
• A013159 ( This bracelet substitutes the chain and clasp)
• A008807 
• X003062
• SW001762 (8)
• SW01779 (8)
• SW01796 (4)

Directions:

1. Using 7mm jump rings attach one 8mm Sapphire pendant to one Heavy Hammered Ring. Then attach one 10mm Sapphire pendant, one 14mm pendant, one 10mm pendant and one 8mm pendant onto the hammered ring. Make sure all pendants face forward. Repeat this step 3 more times and set aside.
2. Now using the large charms made in Step 1 attach them evenly along the bracelet. Do this with a 7mm jump ring and attach the Heavy Hammered Ring and Dotted Dap Circles together.

For October, Swarovski’s Psychology of Colors pick is Sapphire. Check out how bold and confident this hue is!

Cool down with this perfect color for fall/winter! Sapphire is a color loved by many and quite popular in jewelry. Here are some Swarovski colors to match this rich hue:

• Sapphire
• Light Sapphire
• Light Sapphire Shimmer
• Metallic Blue
• Blue Shade
• Denim Blue

Sapphire Jewelry

Check out our other blog post with designs using Swarovski Sapphire!

Our love for memory wire extends beyond just bracelets. We have Beadalon memory wire that has a large diameter for necklace jewelry! Here is a dazzling way to making a collar/choker necklace with memory wire, TierraCast cord ends, rhinestone rondelles, LEATHER and tassels!

What you’ll need:

• Necklace Memory Wire (Silver/Gold/Rose Gold)
• 10mm Rhinestone Rondelles (items used in example: A009131/ A009134/ A004482)
• 2 pieces – 6mm TierraCast Cord End (TC02149)
• 10 Inches – 6mm Braid Leather Cord (Item used in example: CH01088)
• 2 pieces – 8mm Swarovski Round Crystal (Item used in example: SW00101)
• 52mm Tassel with Cap (Item used in example: Z004944)

Directions

1. Cut a full circle of memory wire using Memory Wire Cutters.
2. At one end, make a loop using Memory Wire Finishing Pliers.
3. On the memory wire slide on the following pieces:
   Black crystal, green rondelle, black rondelle, fuchsia rondelle, green rondelle, black rondelle, fuchsia rondelle, cord end, leather, cord end, fuchsia rondelle, black rondelle, green rondelle, fushcia rondelle, black rondelle and green rondelle.
4. Cut memory wire with with about 1/2 to 3/4 inch left. Use your finishing pliers to making a loop at their end. Tighten your loop ends if needed.
5. Open loop of tassel and slide on one end of your memory wire loops. Close tassel loop. Repeat to other memory wire end.

Design a modern and boho style earrings with Swarovski Triangle Shaped Sew-On Stone and tassels!

What you’ll need for earrings:

• 2 – 18x21mm Swarovski Triangle Shaped Sew-On Stone – Item used in example: SW002270
• Gold Chain Link – CH00532
• 5mm Gold Jump Ring – A011519
• 3mm Gold Jump Ring – Z007861
• Gold Post Earrings – Z001831
• 2 – 52mm Tassel with Cap – Item used in example: Z006094 

Instructions:

1. Cut chain with 10 links. Cut 2 pieces total.
2. Open 3mm jump ring, slide on tassel loop and close jump ring.
3. Open 5mm jump ring, slide through 3mm from Step 2 and hole of Swarovski triangle (point end). Close jump ring.
4. Open another 5mm jump ring, slide through other Triangle hole and through a piece of chain end. Close jump ring.
5. Repeat Step 4 to other Triangle hole.
6. Open another 5mm jump ring, slide through both chain ends and close jump ring.
7. Open another 5mm jump ring, slide through 5mm from Step 6 and through post earring hole. Close jump ring.
8. Repeat all steps for other earring.

Designed by Tory.

Mix up shiny Swarovski crystals and natural gemstone beads in an easy memory wrap bracelet.

Mixing up different types beads makes for a modern and even edgy DIY jewelry, especially when you use Swarovski Fine Rocks Tube beads and round Dakota Stones gemstone beads. And to bring even a more edgy look, we’ve added some beautiful Star Cut Crystal Quartz gemstone.

What you’ll need for project:

• 6mm Round Gemstones
• 6mm Crystal Quartz Star Cut Beads
• 30mm Swarovski Fine Rocks Tube Crystal Bead
• 7mm Nugget Spacer (TC00034)
• Extra Heavy Duty Round Bracelet Memory Wire (Silver/Gold/Rose Gold)
  OR Heavy Duty Memory Wire (Silver/Gold)
• Tools: Memory Wire Shears and Memory Wire Finishing Pliers

Minimal Fine Rocks Bracelet

Items used in bracelet: SW01736 & WR00131

Nothing like a simplistic DIY jewelry! Here, we used Extra Heavy Duty Memory Wire, cut a 1.25 coil and slide on the Fine Rocks Tube. The trick to getting the crystal tube curve is to gently curve the tube while sliding it on the memory wire. Center the tube and make a loop to both memory wire ends with the Memory Wire Finishing Pliers. The thick memory wire gives a hearty substance to a minimalistic design, without covering the whole wire!

Sparkly Starry Wrap with Gemstones

Items used in Onyx bracelet: WR00121, CRY6RD-SC, TC00034 (4), SW01736 (2) & ONX6RD-8.

Items used in Howlite bracelet: WR00121, CRY6RD-SC, TC00034 (4), SW01740 (2) & WHT6RD-8.

In these two bracelets are 6mm round gemstones and 6mm Crystal Quartz star cut beads. The star cut and fine rocks tube bead are both a compliment to an edgy and even punk-ish vibe!

1. Cut a coil and a half of heavy duty memory wire.
2. Make a loop to one end of your memory wire with memory wire finishing pliers.
3. Slide the following onto the memory wire:
   9 gemstone beads, nugget spacer, fine rocks tube, nugget spacer, 5 Crystal Quartz star cut beads, nugget spacer, fine rocks tube, nugget spacer and 9 gemstone beads.
4. Cut excess wire, leaving a 3/8 inch end. Make a loop.

Video Tutorial

Check out our previous Facebook LIVE episode, where Tory demonstrates how to easily create one of these wrap bracelets!

We have three exciting projects using September’s Swarovski Psychology of Color: Peridot. See how to energize yourself with this natural hue!

Peridot Wheel Pendant with Ball Chain Necklace

We designed a simple beaded wheel with round Peridor Shimmer crystals. Check out the simple TUTORIAL and all you need to make this Peridot Wheel Pendant on a a ball chain necklace!

What you’ll need:

• 4mm Round Crystal – SW02058 (12)
• 8/0 Silver Seed Bead – SB00106 (1 tube or 12 8/0 seed bead)
• 20mm Quick Link Rings – Z010632
• Crystal Fireline Beading Thread (Z006587/Z006585)
• Needle
• 1.5mm Ball Chain (2-3 feet)
• Silver Ball Chain Connector (Z004792)
  AND
• Peridot Wheel Pendant PDF Downloaded Tutorial

Brushed Peridot Earrings

Make your Peridot colors POP with brushed silver beads and components!

Items used in earrings: SW02060 (2), SW02058 (2), Z018411, A019694, A019606, Y018086 and TC02297.

1. On a headpin, slide on a 4mm crystal, 8 wavy disc (alternating them so it creates a wavy look) and an 8mm crystal. Make a simple loop.
2. Open eyepin loop, slide on loop from step 1, close eyepin loop.
3. On eyepin, slide on brushed silver bead and make a simple loop.
4. Open earwire loop and slide on brushed silver loop. Close loop.
5. Repeat all steps for other earring.

Swarovski: Peridot Passion

This sample and tutorial comes from our friends at Swarovski: Create Your Style, called Peridot Passion. You see how stunning Peridot looks with brass findings!

What you’ll need for necklace:

• SW02060 (13)
• SW02059 (7)
• Vintaj Pattern Leaf in Natural Brass
• 4mm Cable Chain in Natural Brass (Our recommendation CH00514 or A008181)
• TC00710 (8)
• Z016115
• TC01256 (7)
• TC00547 (1)
• Z006523

Instructions

1. Cut the chain into fifteen 1 ½” pieces and set aside.
2. Using one eye pin slide on one 6mm Crystal, one 8mm Crystal and one 6mm Crystal and make a simple loop. Repeat this step 5 more times and set aside.
3. Using one eye pin slide on one 6mm Crystal and make a simple loop. Set aside.
4. Using one head pin slide on one 8mm Crystal and make a simple loop. Set aside.
5. Using the leaf pendant attach seven of the 5mm jump rings across the top of the opening.
6. Using the 1st jump ring on the left of the top of the leaf pendant attach one piece of chain, then attach one 9mm jump ring, then attach another piece of chain. Now attach one component made in Step 2 and to the other side of the component attach another piece of chain. Repeat this pattern two more times and then attach the lobster clasp with a 5mm jump ring.
7. Using the last jump ring on the right of the top of the leaf pendant attach one piece of chain, then attach to the 7.25mm jump ring already on the left of the necklace, then attach another piece of chain. Now attach one component made in Step 2 and to the other side of the component attach another piece of chain. Repeat this pattern two more times and then attach one 9mm jump ring.
8. Using the component made in Step 3 attach one end of this component to the bottom middle of the 9mm jump ring hanging above the leaf pendant. Now attach the component made in Step 4 to the bottom of the 6mm bead.

For September, Swarovski’s Psychology of Colors pick is Peridot. Check out how earthy and natural this hue is!

Jump into this color with high spirits and peacefulness! Peridot is a fresh and energetic color that makes you want to just relax and smell the roses! Here are some Swarovski colors to match this earthy hue:

• Peridot
• Peridot Shimmer
• Chartreuse
• Light Green
• Iridescent Green
• Chrysolite Opal
• Luminous Green

Peridot Jewelry

Check out our other blog post with designs using Swarovski Peridot and Peridot Shimmer crystals!

This DIY statement necklace will become your glamorous accessory of the season. Designed with our Bib connectors and Chinese crystals, all you need to know in order to make this necklace is the basics of making a simple loop and opening a jump ring!

What you’ll need to make this necklace:

• Diamond Design Curved Bib Pendant Connector (Z021568)
• 3 Inch Headpins (A019679)
• 11mm Teardrop Chinese Crystal (Used in necklace: A016579)
• 4mm Antiqued Silver-Plated Corrugated Round Bead (Z001371)
• 2 feet of Antique Silver Chain (Used in necklace: CH00025)
• 5.5mm Antique Silver Jump Rings (X003062)
• Clasp (Used in necklace: Y012952)

Directions

1. On a headpin, slide on a round bead and teardrop bead. Make a simple loop. Open loop and slide dangle to first hole of bib connector.
2. On a headpin, slide on a round bead, teardrop bead and round bead. Make a simple loop. Open loop and slide dangle to next hole of bib connector.
3. On a headpin, slide on a round bead, teardrop bead, round bead and teardrop. Make a simple loop. Open loop and slide dangle to next hole of bib connector.
4. On a headpin, slide on a round bead, teardrop bead, round bead, teardrop and two round bead. Make a simple loop. Open loop and slide dangle to next hole of bib connector.
5. On a headpin, slide on a round bead, teardrop bead, round bead, teardrop, round bead and teardrop. Make a simple loop. Open loop and slide dangle to next hole of bib connector.
6. On a headpin, slide on a round bead, teardrop bead, round bead, teardrop, round bead, teardrop and two round bead. Make a simple loop. Open loop and slide dangle to next hole of bib connector.
7. On a headpin, slide on a round bead, teardrop bead, round bead, teardrop, round bead, teardrop, round bead and teardrop. Make a simple loop. Open loop and slide dangle to next hole of bib connector.
8. On a headpin, slide on a round bead, teardrop bead, round bead, teardrop, round bead, teardrop, round bead, teardrop and round bead. Make a simple loop. Open loop and slide dangle to next hole of bib connector.
9. Repeat step 7 for next hole on bib connector.
10. Repeat step 6 for next hole on bib connector.
11. Repeat step 5 for next hole on bib connector.
12. Repeat step 4 for next hole on bib connector.
13. Repeat step 3 for next hole on bib connector.
14. Repeat step 2 for next hole on bib connector.
15. Repeat step 1 for next hole on bib connector.
16. Cut two pieces of chain at 6″ to 8″ long.
17. Open jump ring and slide on one end of chain and one end of bib connector. Close jump ring.
18. Open another jump ring and slide on other chain and to other end of bib connector. Close jump ring.
19. Open another jump ring and slide on one end of the chain and through ring of clasp.
20. Repeat steps 9 with another jump ring and other clasp ring.

We have three lovely projects using August’s Swarovski Psychology of Color: Rose Water Opal.

Beaded Fan Necklace with Swarovski Crystals

Items used in necklace: (12) SWZ0469, SB00107, SB00423, A021148, A006585, A015211, A011519, (2) CH01096

Get FREE Downloadable PDF Pattern Tutorial Here!

Gold & Silver Rose Opal Earrings

Items used in earrings: (4) SWZ0469, SB00423, A011519, Y018889, Z010751, A007659, A011528, Z012031

We mixed up the fun in this pair of earrings with gold and silver findings. It adds stunning layers and surely makes the crystals stand out!

Directions:

1. On a headpin, slide on a gold seed bead, bicone and another seed bead.
2. On an eyepin, slide on a gold seed bead, bicone and another seed bead.
3. Open loop from Step One and slide on brushed ring link. Close loop.
4. Open gold jump ring, slide on brushed ring link and one hole of gold brushed disc. Close jump ring.
5. Open a loop of link from Step Two, slide on other hole of gold brushed disc and close loop.
6. Open earwire loop and slide on other end of crystal link and close earwire loop.
7. Repeat all steps for other earring.

Rose Water Rhapsody

Our friends at Swarovski Create your Style, designed this stunning necklace with Rose Water Opal crystals and Fine Rocks Tube beads.

What you’ll need:

• (24) 3mm Rose Water Opal Bacon Crystal
• (88) SWZ0469
• (44) SWZ0470
• (42) SW01900
• (6) SW01902
• (2) SW02020
• (1) SW01733
• (3) 14x10mm Rose Water Opal Fancy Stone
• (3) 14x10mm Rhodium Plated Fancy Stone Setting
• (1) TC01871
• (6) TC00278
• (3) TC01253
• (2) TC00853
• (2) TC01899
• (1) FTBW0001
• SW01830
• Alcohol Wipes

Directions:

1. Using alcohol to wipe clean all the findings and set to dry.
2. Using one fancy stone, blue in matching setting and set aside for 24 hours to dry. Repeat two times and set aside.
3. Using one eyepin, attach one pendant made in Step 2, then slide on a bead cap, on SW02020 and another bead cap. Make a simple loop. Repeat one more time and set aside. Repeat one more time and set aside.
4. Using another eypin, attach one pendant made in Step 2, then slide on a bead cap, on SW01733 and another bead cap. Make a simple loop.
5. Cut beading wire into two 20″ pieces.
6. Using both wires together, slide on a SW01902, component made in Step 3, SW01902, SWZ0469, SWZ0470, SWZ0469, SW01902, one component made in Step 4, SW01902, SWZ0469, SWZ0470, SWZ0469, SW01902, component made in Step 3, and SW01902. Position all these in the center of the two strands of wire.
7. Take all remaining 4mm bicone beads and pour them onto your bead mat. Mix them all together.
8. Starting with the right side of the necklace and only using one of the two wires coming out of the 6mm bicone bead, string on three 3mm bicone beads. Now using your bead mix you created in Step 7 randomly string on 42 4mm bicone beads. String on three 3mm bicone beads. Repeat for this step for the second empty wire.
9. Using both wires, slide on one crimp bead and one end of the toggle. Crimp to close and add crimp cover.
10. Repeat Steps 8-9 to make left side of the necklace.

We recently got new Chinese Crystals in and So personally favors the opaque crystals. Here is a pair of earrings she made that looks like firecrackers!

What you’ll need for earrings:

• Earwire
• Bali Chandelier Earrings (Y013697)
• 1.5″ Headpins (A019647)
• 4mm Chinese Crystal Rondelle 
• 8/0 Silver Seed Bead (SB00106) – This item is optional.
  OR
• Components list of items used in earrings example: TC02297. Y013697, A019647, Z013491, Z013499, SB00106

Directions: (Seed beads are optional)

1. On a headpin, slide on two red beads, one yellow and one seed bead. Make a simple loop. Open loop and slide on first hole on earring finding.
2. On another headpin, slide on three red beads, two yellow and one seed bead. Make a simple loop. Open loop and slide on second hole on earring finding.
3. On another headpin, slide on four red beads, three yellow and one seed bead. Make a simple loop. Open loop and slide on third hole on earring finding.
4. Repeat Step 2 and slip onto fourth hole on earring finding.
5. Repeat Step 1 and slip onto last hole on earring finding.
6. On another headpin, slide on a yellow bead and make a simple loop. Open loop and slide through the inner hole of earring finding.
7. Open earwire loop and slide through top hole of earring finding. Close loop.
8. Repeat all steps for other earring.

We have three COOL projects using July’s Swarovski Psychology of Color: Aquamarine. Revamp your DIY jewelry with these ideas!

Aquamarine Bubble Earrings

Create cascading bubbles in this pair of Aquamarine earrings.

Items used in earrings: TCZ0077, TC00198 (2), A019672, A019606, SW00071 (6), SW00070 (10), SW00069 (6)

Directions:

1. On a headpin slide on a 6mm round crystal and make a simple loop. Repeat to make a total of FOUR 6mm dangle.
2. On a headpin slide on a 8mm round crystal and make a simple loop. Make a total of SIX 8mm dangle.
3. Open loop on eyepin, slide on a 6mm dangle from Step One and close loop. Slide a 4mm round crystal on the eyepin and make a simple loop.  Repeat to make a total of FOUR links.
   1. Open loop of link, slide through outer loop of the TierraCast Bali 1-to-5 Link and close loop. Repeat to the other outer loop of TierraCast Link
   2. Repeat to other TierraCast Bali 1-to-5 Link.
4. Open loop on eyepin, slide on a 8mm dangle from Step Two and close loop. Slide a 6mm round crystal on the eyepin and make a simple loop. Repeat to make a total of SIX links.
   1. Open loop of link, slide through second loop of the TierraCast Bali 1-to-5 Link and close loop. Skip middle loop and repeat to attached link to the fourth loop of TierraCast Link.
   2. Repeat to other TierraCast Bali 1-to-5 Link.
5. Open loop on eyepin, slide loop of link you make in Step Four and close loop. Slide a 4mm round crystal on the eyepin and make a simple loop. Repeat to make a total of TWO links.
   1. Open loop of link, slide through the middle loop fo the TierraCast Bali 1-to-5 Link and close loop.
   2. Repeat to other TierraCast Bali 1-to-5 Link.
6. Open ear wire loop and slide on top loop of TierraCast Bali Link. Close loop. Repeat to other ear wire and Bali Link.

Aquamarine Raindrop Necklace

This easy DIY necklace requires minimal effort to make and a gorgeous piece to wear!

Items used in Necklace: SW02134, TC02317, Y003724

Directions:

1. Slide prong of the pinch bail to pendant hole and gently pinch the bail.
2. Open clasp on necklace and slide necklace chain through bail.

Swarovski: Triple Ocean Waves Necklace

Our friends at Swarovski Create your Style, designed this stunning necklace.

What you’ll need:

• (24) SW00621
• (24) SW02035
• (49) SW02036
• (24) SW01462
• (24) SW02068
• (8) 8mm Swarovski Aquamarine Pavé Beads
• (24) SW00729
• TC01871
• (36) TC00034
• (2) 3mm Crimp Tube
• (2) 4mm Crimp Cover
• FTBW0001

Directions:

1. Cut stringing wire into three 32” pieces.
2. Using all three wires together string on one Pave Bead, two SW02036, one nugget bead, three SW02036, one nugget bead, three SW02036, one nugget bead, three SW02036, one nugget bead, two SW02036 and one Pave Bead. Position all these in the center of the three strands of wire.
3. Starting with the right side of the necklace, and only using one of the three wires coming out of the pave bead, string on one SW00621, one SW02068, one SW02035, one SW00729, one Sw01462, one nugget bead, one SW02036, one nugget bead, one SW01462, one SW00729, one SW02035, one SW02068 and one SW00621. Repeat this two more times for the two remaining open wires.
4. Now take all three wires together again and slide on one Pave Bead, two SW02036, one nugget bead, one SW02036, one nugget bead, two SW02036 and one Pave Bead.
5. Repeat Step 3.
6. Now take all three wires together again and slide on one Pave Bead, two SW02036, one nugget bead, three SW02036, one nugget bead, and two SW02036. Using all three wires slide on one crimp bead and one end of the toggle. Crimp to close and add crimp cover.
7. Repeat Steps 3 – 6 to make left side of the necklace.

Make this Golden Halo Earrings, tiered with TierraCast® components, acetate and Swarovski® crystals.

What you’ll need for these pair of earrings:

• Acetate Half Circle (earrings use Z012461)
• 8mm Gold Jump Ring (earrings use A011523)
• (2) TierraCast® 19mm Gold Hammertone Ring (earrings use TC00611)
• Earwire Findings (earrings use TC02298)
• (2) Swarovski® 16mm Princess Cut Crystal Pendant (earrings use SW02167)
  OR
• Buy All Products with BAP0005

Directions:

1. Open jump ring, slide on crystal pendant and bottom hole of acetate. Close jump ring.
2. Open another jump ring, slide on top hole of acetate and hammertone ring. Close jump ring.
3. Open earwire loop and slide on hammertone ring. Close loop.
4. Repeat all steps for other earring.

So Vang has conjured up another super simple pair of earrings using Czech Ginko Two Hole Beads. Free downloadable pattern tutorial.

These pair of earrings are easy to make with minimal amounts of components. You can make a load of Ginko Fan Earrings with a tube of 11/0 Seed beads and Ginko Beads!

Ginko Fan Earrings

So Vang had a few beads from her previous Ginko Scale Bracelet, so she used them here to make these earrings to possibly match the bracelet!

What you’ll need:

• Czech Ginko Beads
• 11/0 Seed Beads
• 4mm 22 Gauge Jump Rings
• Earwire Findings
• Fireline Beading Thread and Needle
  AND
• Ginko Fan Earrings PDF Pattern Tutorial

Items used in Ginko Fan Earrings above: SB03708, SB00422, A002413, TCZ0078, A006585, A015211 

Ginko Fan Earrings with Swarovski® Crystals

Embellish your fan earrings with a link of Swarovski crystals. Doll up your earrings and sparkle!

What you’ll need for earrings:

• Czech Ginko Beads
• 11/0 Seed Beads
• TWO 4mm Swarovski Bicone Crystals
• 24-Gauge Eyepin (Silver/Gold)
• Earwire Findings
• Fireline Beading Thread and Needle
  AND
• Ginko Fan Earrings PDF Pattern Tutorial

Items used in Ginko Fan Earrings with Swarovski Crystals above: SB03697, SWZ0581(2), SB00422, A019595, Z012031, A006585, A015211 

We have three exciting projects using June’s Swarovski Psychology of Color: Tangerine. See how to freshen up your jewelry with these DIY projects!

Tangerine Cuff

See how easy it is to making your own sparkling bracelet with a beadable cuff and Swarovski bicone crystals.

What you’ll need:

• Z001859  OR Gold
• SB00106 OR  Gold
• Fireline Beading Thread
  
• Beading Needle
• SW00969 (12)
  OR
• Get the Buy All Product: BAP0002

Directions:

1. Cut a 4 foot piece of beading thread.
2. Add a Bead Stopper or sew through a small seed bead twice, leaving a 5 inch tail.
3. Sew up through the the first hole and pick up a bicone crystal and seed bead.
4. Sew across the channel to the hole opposite.
5. Skip a hole and sew up through then next hole. Pick up a bicone crystal and seed bead.
6. Sew across the channel to the hole opposite.
7. Keep repeating these step sequence to add a total of 12 bicone crystals to cuff.
8. Sew through the whole pattern again to secure the pattern.
9. Tie off ends and cut off excess.

Tangerine Drop Earrings

Make this sweet tiered earrings with dangling crystals inside a Teardrop Hoop.

What you’ll need:

• Z017165 (2)
• TC001253 (4)
• SW00968 (2)
• SW00967 (2)
• SW00966 (2)
• TC001257 (2)
• TCZ0077
  OR
• Get the Buy All Product: BAP0003

Directions:

1. Slide a 8mm crystal on ball headpin and make a simple loop.
2. Open eyepin loop, slide on loop from step 1 and close eyepin loop.
3. Slide 6mm crystal on eyepin and make a simple loop.
4. Open loop you just made and slide loop on inside loop of hoop component. Close loop.
5. Open another eyepin loop and slide on top loop of hoop components. Close loop.
6. Slide a 4mm crystal on eyepin and make a simple loop.
7. Open loop you made from Step 6 and slide on earwire. Close loop.
8. Repeat all steps for other earring.

Swarovski: Satsuma Suprise

Our friends at Swarovski Create your Style, designed this colorful multi-strand bracelet.

What you’ll need:

• (40) SW00969
• (9) SW00970
• (3) Tangerine Chaton Ss39
• (3) Peach DeLite Chaton Ss39
• (8) TC02407
• (6) TierraCast Chaton Drop 94-6837-03
• (18) TC01044
• (6) A011517
• WR00126
• SW01830

Directions:

1. Use alcohol wipes to clean all findings and set aside to dry.
2. Using one jump ring attach to one ss39 chaton setting. Repeat five more times and set aside.
3. Using one 1088 ss39 chaton stone glue into one ss39 chaton setting and set aside for 24 hours to dry. Repeat five more times and set aside.
4. Using two and a half coils of memory wire, make a double loop at one end with Memory Wire Finishing Pliers.
5. Slide on the following FOUR sections:
   1. TWO 4mm bicones, 6mm bicone, TWO 4mm bicones, Botanical bead, 4mm bicone, Tangerine chaton charm, Botanical bead, TWO 4mm bicones, 6mm bicone, TWO 4mm bicones , THREE metal seed beads,
   2. TWO 4mm bicones, 6mm bicone, TWO 4mm bicones, Botanical bead, 4mm bicone, Tangerine chaton charm, Botanical bead, TWO 4mm bicones, 6mm bicone, TWO 4mm bicones, THREE metal seed beads, Peach Delite chaton charm, THREE metal seed beads,
   3. TWO 4mm bicones, 6mm bicone, TWO 4mm bicones, Botanical bead, 4mm bicone, Botanical bead, TWO 4mm bicones, 6mm bicone, TWO 4mm bicones, THREE metal seed beads, Peach Delite chaton charm, THREE metal seed beads,
   4. TWO 4mm bicones, 6mm bicone, TWO 4mm bicones, Botanical bead, 4mm bicone, Botanical bead, TWO 4mm bicones, 6mm bicone, TWO 4mm bicones, THREE metal seed beads, TWO 4mm bicones, 6mm bicone, and TWO 4mm bicones.
6. Trim the end of the wire and make a double loop at the end.
7. Add one chaton setting at each end of the bracelet.

We have three exciting projects using May’s Swarovski Psychology of Color: Light Topaz. See how we transform this brilliant hue!

Golden Rays Bracelet

This lightweight and easy stretch bracelet is sure to make heads turn. Each Cushion Setting has two holes running along the back for an easy stretch bracelet you’ll love to wear all the time!

What you’ll need:

• A021633
• (16) SW02184 
• (16) SW02185
• SB00107 (or 32 8/0 seed bead OR 2mm round gold bead)

Twinkling Star Necklace

Be dazzled with this simplistic and minimalistic design!

What you’ll need:

• SW02183
• SW02185
• 20″ CH00724
• (2) X003062
• X001505
• Z001124

Little Drops of Sunshine

Our friends at Swarovski Create your Style, designed this bright earring tutorial.

What you’ll need:

• (2) SW02186
• (2) SW02120
• (2) 12mm Light Topaz Cushion Crystal
• (4) SW02187
• (8) SW02096
• (4) SW02098
• (4) SW01829
• (2) 12mm Gold Cushion Setting (3P1TC3)
• (2) TC02413
• TCZ0139
• A011517
• A019616
• SW01830

Directions:

1. Using alcohol wipes, clean all the findings and set aside to dry.
2. Using 10mm fancy stone, blue into cushion setting and set aside. Repeat 3 more times for a total of 2 Light Topaz and 2 Sunshine Delite. Let dry for 24 hours.
3. Repeat steps 2 for 12mm cushion crystal and setting.
4. Slide on an eyepin, a 4mm crystal bead. Make a simple loop. Repeat 7 more times.
5. Slide on an eyepin, a 6mm crystal bead. Make a simple loop. Repeat for 3 more times.
6. Using three jump rings, attach one to 16mm crystal pendant, and then add the other two jump ring to create a chain.
7. Using five jump rings, attach one to 16mm crystal pendant, and then add the other four jump ring to create a chain.
8. Using one bead component from Step 4, attach to Sunshine Delite dangle from Step 2. Repeat once more and set aside.
9. Using one bead component from Step 4 and one made in Step 5, link together and attache the 6mm ends to Light Topaz Dangle in Step 2. Repeat once more and set aside.
10. Using two bead components made in Step 4 and one made in Step 5, link together and attached 4mm end to one 12mm Light Topaz dangle in Step 3. Repeat once more and set aside.
11. Using the Charm Keep Hoop, open the hoop at the top and begin to slide on the components in this order, then close loop:
    1. Component in Step 9
    2. Component in Step 6
    3. Component in Step 10
    4. Component in Step 7
    5. Component in Step 8
12. Repeat Step 11 in the reverse order to make second dangle.
13. Open earwire loop and slide on hoop dangle. Close loop. Repeat for other earring.