Wood jewelry is everywhere and it is a trend that will probably stick for a while. We took our favorite wood pendants and painted them with Vintaj Patinas. Patinas are great for painting on wood because it gives you an even and full coat of paint. Plus, they dry fast enough that if you need a second layer, you only need to wait a minute of two to add your next coat.

What you’ll need:

• 2 – Natural Wood Pendant (A021783)
  These pendants come in two other colors: Dark Brown and Black.
• Vintaj Patina Paints (Item used in example TL00300)
• Gold Post Earrings (Z001831)
• 8mm Gold Jump Ring (A011523)
• Other tools: Paint brush, Painter’s Tape & Flat Nose Pliers

Step-by-Step Tutorial

Rocky Butte, from our friends at DakotaStones, “is mined in Oregon and may have either dendritic or landscape qualities. It may also be called Rocky Butte Picture Jasper. The combination of color and pattern variation are reminiscent of Red Creek Jasper, although the colors are much more muted. Rocky Butte Jasper strands are predominantly shades of gray, brown and tan with some beads or inclusions of rust and rose.” (DakotaStones.com)

If you love gemstones as much as we do, you’ll love this pair of hoop earrings with North American Rocky Butte gemstone beads. It’s a perfect pair of earrings for fall!

What you’ll need for earrings:

• 4mm Round Gemstones (Item used in example: RBP4RD)
• 30mm Hoop Frame (Z017105)
• Silver Seed Bead (SB00106)
• Headpins (A019647)
• Earring Finding (Item used in example: A008998)

Directions:

1. On a headpin slide on the following amount of gemstones and make a simple loop:
   A. 1 gemstone, make a total of 8.
   B. 2 gemstones, make a total of 12.
   C. 3 gemstones, make a total of 8.
   D. 4 gemstones, make a total of 2.
2. On open hoop on hoop frame and slide on the following seed bead and gemstone dangle:
   Seed bead, A, seed bead, A, seed bead, B, seed bead, B, seed bead, B, seed bead, C, seed bead, C, seed bead, D, seed bead, C, seed bead, C, seed bead, B, seed bead, B, seed bead, B, seed bead, A, seed bead, A and seed bead.
3. Close hoop frame. Open earwire loop and slide on hoop frame loop. Close earwire loop.
4. Repeat Step 2 and 3 for other earring.

We’ve got THREE easy projects using October’s Swarovski Psychology of Color: Sapphire. Design bold and confident jewelry with this hue!

Sapphire Ombré Bracelet

Items used in bracelet: CH00724 (10″), TC01897 (4), Z008576, SW00072 (15), SW02049 (8) and SW00001 (8). Tool: Magical Crimping Pliers

This bracelet is designed using our popular beading chain, 2mm crimps and slide on clasp. We’ve also used Magical Crimping Pliers to finish the crimps! Check out how to use this tool in our BeadSmith Magical Crimping Pliers blog post.

1. Slide beading chain through slide on clasp.
2. On the beading chain, slide on the following:
   Crimp tube, 3 clear crystal, 1 light sapphire, one clear, 2 light sapphire, 1 sapphire, 1 light sapphire, 11 sapphire, 1 light sapphire, 1 sapphire, 2 light sapphire, 1 clear, 1 light sapphire, 3 clear crystal and crimp tube.
3. Slide chain through slide on clasp in the same direction you did in step one.
4. Center beads and make a crimp on both ends of your crystals with magical crimping pliers. Make sure to leave a gap so that the crystals lay nicely and not too rigid on the chain.
5. Slide bracelet over the larges width of your hand and cut excess chain ends if needed.
6. Add a crimp to both ends of the beading chain and make a crimp with the magical crimping pliers.

Sapphire Icicle Earrings

Items used in earrings: SW00183 (2), SW00182 (4), SW00181 (2), SW02088 (2), SW00634 (2), TCZ0078, A001495, A019697, TC00006 (4) and TC00032 (2).

1. On headpin, slide on the following and make a simple loop:
   8mm bicone, 5mm spacer, 2 6mm bicone, 4mm spacer and 4mm sapphire bicone.
2. Open eyepin loop, slide on crystal dangle from Step 1 and close loop.
3. On the eyepin, slide on the following and make a simple loop:
   4mm sapphire, 4mm spacer, 4mm light sapphire and 3mm crystal.
4. Open earwire loop, slide one crystal dangle and close loop.
5. Repeat all steps for other earring.

Swarovski Sapphire Bracelet

Our friends at Swarovski: Create Your Style has this stunning bracelet made with classic cut crystal pendants!

What you’ll need for bracelet:

• Z009912 (4)
• 23mm Heavy Hammered Ring Sterling Silver Plated – Vintaj® PT198-040 (4)
• A013159 ( This bracelet substitutes the chain and clasp)
• A008807 
• X003062
• SW001762 (8)
• SW01779 (8)
• SW01796 (4)

Directions:

1. Using 7mm jump rings attach one 8mm Sapphire pendant to one Heavy Hammered Ring. Then attach one 10mm Sapphire pendant, one 14mm pendant, one 10mm pendant and one 8mm pendant onto the hammered ring. Make sure all pendants face forward. Repeat this step 3 more times and set aside.
2. Now using the large charms made in Step 1 attach them evenly along the bracelet. Do this with a 7mm jump ring and attach the Heavy Hammered Ring and Dotted Dap Circles together.

People will want to PURR with envy when they see you flaunting these tassels earrings made with Czech beads.

What you’ll need for earrings:

• Czech Cat Beads
• 27x47mm Flat Half Circle Fan Tassels
• 19x29mm Fan Tassels
• Eyepin
• 5mm and 6mm Jump Ring
• Earring Finding

Purple Persian Tassel Earrings

Items used in earrings: A019617, Z011514, Z011522, Z007650, Z019427 &  Z003693.

1. Open large jump ring, slide on both tassels and close jump ring.
2. Open small jump ring, slide through large jump ring in Step 1, and through eyepin loop. Close jump ring.
3. On the eyepin, slide on a Czech cat bead and make a simple loop.
4. Open loop you just made in Step 3, slide on earring loop and close loop.
5. Repeat all steps for other earring.

DIY spooky skull earrings for Halloween or skull lovers! Get this easy tutorial today.

It’s the first day of October and what a good way to start this DIY month with some skull earring for Halloween! These earring are also perfect for skull lovers, like our Designer Heidi. She designed these earrings using hoop earrings in three different sizes (60mm, 50mm, 40mm) as the base, TierraCast skull beads and various metal beads.

What you’ll need:

• Hoop Earrings (60mm / 50mm / 40mm)
• TierraCast Skill Beads w/ Horizontal Hole (Ant. Copper/Ant. Silver/Ant. Brass / Ant. Gold)
• Metal Beads or TierraCast Beads

Directions:

1. Open earwire’s hinge and slide the following onto the hoop earring:
   5 metal beads, skull bead and 5 metal beads.
2. Repeat for other earring.

Beaded Skull Hoop Earrings

Items used in 40mm Hoop Earrings: Z017100, TC01315 (20)& TC01099 (2)

Items used in 50mm Hoop Earrings: A014110, TC01489 (20) & TC01098 (2)

Items used in 60mm Hoop Earrings: A014111, A003562 (2pks) & TC00196 (2)

We’re continuing our love for Cymbal components with these FANCY Stripe Earrings made with the Cymbal Kolympos bead ending. Check out this FREE pattern from our designer, So Vang.

If you haven’t yet seen the Cymbal components that just came out a few month ago, you’re missing out on some great components and findings for your bead stitching patterns. Here is a simple pair of earrings you can make using the Cymbal Kolympos bead ending.

Though this pattern was intended and can be used for a bracelet pattern, we’ve shorten the pattern to make some statement earrings instead!

What you’ll need for earrings:

• Cymbal Kolympos (Silver or Gold)
• Czech Honeycomb Beads
• Czech DiamonDuo Beads
• Czech O-Beads
• Miyuki 8/0 Seed Beads 
• Earring Findings
• Fireline Beading Thread and Needle
  AND

• Download PDF Pattern for Fancy Stripe Earrings

Items used for earring example: Z013596, SB03303, SB00107, SB01916, Z004589, A006587, A015211 and TCZ0139

Make this pair of earrings for your next beach vacation because it screams FUN! Designed with Acetate, Straw and a post earring, it’s so easy to make and is lightweight.

What you’ll need for earrings:

• Acetate Coin (Z015174)
• Straw Diamond Pendant (Z001655)
• Gold Post Earrings (Z001831)
• 5mm Gold Jump Ring (A011519)
• 8mm Gold Jump Ring (A011523)
• Tool: Bead Reamer or Awl

Directions:

1. With your bead reamer or awl, make a hole at a corner of your straw component; likely between the outer and second layer of straw.
2. Open 8mm jump ring and slide jump ring through Straw hole you made in Step 1 and through an acetate hole. Close jump ring,
3. Open 5mm jump ring and slide through other hole of acetate coin and through post earring hole. Close jump ring.
4. Repeat all steps for other earring.

Design a modern and boho style earrings with Swarovski Triangle Shaped Sew-On Stone and tassels!

What you’ll need for earrings:

• 2 – 18x21mm Swarovski Triangle Shaped Sew-On Stone – Item used in example: SW002270
• Gold Chain Link – CH00532
• 5mm Gold Jump Ring – A011519
• 3mm Gold Jump Ring – Z007861
• Gold Post Earrings – Z001831
• 2 – 52mm Tassel with Cap – Item used in example: Z006094 

Instructions:

1. Cut chain with 10 links. Cut 2 pieces total.
2. Open 3mm jump ring, slide on tassel loop and close jump ring.
3. Open 5mm jump ring, slide through 3mm from Step 2 and hole of Swarovski triangle (point end). Close jump ring.
4. Open another 5mm jump ring, slide through other Triangle hole and through a piece of chain end. Close jump ring.
5. Repeat Step 4 to other Triangle hole.
6. Open another 5mm jump ring, slide through both chain ends and close jump ring.
7. Open another 5mm jump ring, slide through 5mm from Step 6 and through post earring hole. Close jump ring.
8. Repeat all steps for other earring.

Designed by Tory.

We have three exciting projects using September’s Swarovski Psychology of Color: Peridot. See how to energize yourself with this natural hue!

Peridot Wheel Pendant with Ball Chain Necklace

We designed a simple beaded wheel with round Peridor Shimmer crystals. Check out the simple TUTORIAL and all you need to make this Peridot Wheel Pendant on a a ball chain necklace!

What you’ll need:

• 4mm Round Crystal – SW02058 (12)
• 8/0 Silver Seed Bead – SB00106 (1 tube or 12 8/0 seed bead)
• 20mm Quick Link Rings – Z010632
• Crystal Fireline Beading Thread (Z006587/Z006585)
• Needle
• 1.5mm Ball Chain (2-3 feet)
• Silver Ball Chain Connector (Z004792)
  AND
• Peridot Wheel Pendant PDF Downloaded Tutorial

Brushed Peridot Earrings

Make your Peridot colors POP with brushed silver beads and components!

Items used in earrings: SW02060 (2), SW02058 (2), Z018411, A019694, A019606, Y018086 and TC02297.

1. On a headpin, slide on a 4mm crystal, 8 wavy disc (alternating them so it creates a wavy look) and an 8mm crystal. Make a simple loop.
2. Open eyepin loop, slide on loop from step 1, close eyepin loop.
3. On eyepin, slide on brushed silver bead and make a simple loop.
4. Open earwire loop and slide on brushed silver loop. Close loop.
5. Repeat all steps for other earring.

Swarovski: Peridot Passion

This sample and tutorial comes from our friends at Swarovski: Create Your Style, called Peridot Passion. You see how stunning Peridot looks with brass findings!

What you’ll need for necklace:

• SW02060 (13)
• SW02059 (7)
• Vintaj Pattern Leaf in Natural Brass
• 4mm Cable Chain in Natural Brass (Our recommendation CH00514 or A008181)
• TC00710 (8)
• Z016115
• TC01256 (7)
• TC00547 (1)
• Z006523

Instructions

1. Cut the chain into fifteen 1 ½” pieces and set aside.
2. Using one eye pin slide on one 6mm Crystal, one 8mm Crystal and one 6mm Crystal and make a simple loop. Repeat this step 5 more times and set aside.
3. Using one eye pin slide on one 6mm Crystal and make a simple loop. Set aside.
4. Using one head pin slide on one 8mm Crystal and make a simple loop. Set aside.
5. Using the leaf pendant attach seven of the 5mm jump rings across the top of the opening.
6. Using the 1st jump ring on the left of the top of the leaf pendant attach one piece of chain, then attach one 9mm jump ring, then attach another piece of chain. Now attach one component made in Step 2 and to the other side of the component attach another piece of chain. Repeat this pattern two more times and then attach the lobster clasp with a 5mm jump ring.
7. Using the last jump ring on the right of the top of the leaf pendant attach one piece of chain, then attach to the 7.25mm jump ring already on the left of the necklace, then attach another piece of chain. Now attach one component made in Step 2 and to the other side of the component attach another piece of chain. Repeat this pattern two more times and then attach one 9mm jump ring.
8. Using the component made in Step 3 attach one end of this component to the bottom middle of the 9mm jump ring hanging above the leaf pendant. Now attach the component made in Step 4 to the bottom of the 6mm bead.

For September, Swarovski’s Psychology of Colors pick is Peridot. Check out how earthy and natural this hue is!

Jump into this color with high spirits and peacefulness! Peridot is a fresh and energetic color that makes you want to just relax and smell the roses! Here are some Swarovski colors to match this earthy hue:

• Peridot
• Peridot Shimmer
• Chartreuse
• Light Green
• Iridescent Green
• Chrysolite Opal
• Luminous Green

Peridot Jewelry

Check out our other blog post with designs using Swarovski Peridot and Peridot Shimmer crystals!

Brighten up your days with a DIY rainbow tassel earrings.

These pair of earrings use our popular cap tassels, all strung on hoop earrings! Flaunt this trendy and cheerful look.

Directions

1. Slide the following seed beads and tassels onto the hoop finding:
   Seed bead, purple, seed bead, blue, seed bead, green, seed bead, yellow, seed bead, orange, seed bead, red and seed bead.
2. Slide hoop end through the hole of the other hoop end.
3. Using your round nose pliers, roll a simple loop with the hoop end.
4. Open ear wire loop and slide on loop of tassel hoop. Close ear wire loop.
5. Repeat all steps for other earring.

Items used in earrings: SB00106, A013204, Z013686, Z013685, Z013684, Z013687, Z014017, Z013688, TCZ0078

Make easy DIY jewelry using Beadable Components and adding POPS of color with Miyuki Delica Seed Beads. Here are ways to bead and use the beadable components.

From our recent Trends We Love, our new Beadable Components are what you need for an easy bead-stitch project. These pairs well with our 11/0 Miyuki Delica Seed Beads or beads with a width of 1.5mm or thinner. Our projects uses the basic ladder stitch. Here is a look at how a ladder stitch is done to sew through the channels. Make sure when you’ve sewn through your pattern or channels, to sew through them again to strengthen the pattern.

Here are some projects using these beadable components:

Beadable Ring Pendant

The Beadable Ring Pendant (Silver or Gold) has 24 channels and fun options to designing with this piece. Each channel holds 3 Delica beads. Here are a few ideas.

On the left is a pretty pair of pink and gold earrings. We even added a pearl dangle at the bottom! Make sure to use size 24-gauge headpins if adding dangles to beadable components.

Items used in earrings: Z011337 (2), A019635, SW00665 (2), TC02298, SB00269, SB02332 (A015211 & A006587)

In the middle, we’ve made a rainbow wheel with the beadable pendant. Attach it to your necklace chain for this easy DIY necklace!

Items used in rainbow pendant necklace: Z011336 (2), SB03546, SB02343, SB02336, SB02310, SB02311, SB03545, SB02327, SB02349, A001528, Z001033 (A015211 & A006587)

And lastly we created an ombré effect with the pendant on the right.

Items used in right pendant: Z011336 (2), SB01824, SB01822, SB01826 (A015211 & A006587)

Beadable Teardrop Pendant

Love the shape of the classic teardrop! This beadable component is much easier to sew through since it only has 5 channels to work with. Each channel holds different amounts of Delica beads. The outer channel holds 13 Delicas, the inner two holds 15 Delicas and the middle holds 16. Here are two ways to using this beadable component.

The necklace on the right uses the amount of correct amount of Delicas for each channel. We’ve also used two colors to add a design to its channels. Then, using 24-gauge jump rings, we’ve added small tassels to the bottom holes of the pendant before making a fun necklace with it!

Items used in necklace: Z011339, SB00269, SB02336, A002413, Z013681, Z001033 (A015211 & A006587)

And who wouldn’t love a pair of earrings! On the right, we have a charming pair of gold earrings using Delica beads and metal tube beads. The tube beads has the small thickness as Delica seed beads and works perfectly for these beadable components.

Items used in earrings: Z011342 (2), Z009196, SB003545, A014108 (A015211 & A006587)

Check out this lovely tutorial courtesy of Leather Cord USA. Learn to make celtic knots with leather cord and use the skill to make fun jewelry designs!

Our friend, Michelle from Leather Cord USA provided us with this great tutorial on how to tie the double celtic knot using two pieces of leather cord! Make yours today.

What You’ll Need:

• 2 – 1.5mm LeatherCord USA Leather (2 Meter Length)
• 2 – End Cap (Suggestion item# A010436)
• Large-Hole Gemstones
• 10″ or More of Chain link
• Clasp & Jump Ring
• Needle Nose Pliers & Cutter

Step by step instructions:

1. Take the two strands of Round Leather Cords and place evenly side by side then fold in half, creating four strands grouped in two.
2. Lay leather flat on a table or board
3. Take the right side group of two strands and create a loop laying it on top of the left strands. This will create three openings: top, middle and left (outside) as indicated in the photo below.
4. Take the left side and cross the cord over the tail of the right side then under the base of the top opening and feed through then back down the middle opening and up through the left opening.
5. Gently pull both tails while adjusting the knot into place. (Be sure to keep the strands lying flat while pulling.)
6. Repeat steps 3-5 for the left side: Take the left tail and create a loop laying it on top of the right strands. Take the right side and feed the cord over the left tail then under the base of the top opening and feed through then back down the middle opening and up through the left opening.
7. Repeat all steps to create five individual knots.
8. Feed one Large Hole Bead on the two center strands
9. Feed one Large Hole Bead on the two left strands and one on the two right strands
10. Feed a final Large Hole Bead on the two center strands
11. Repeat the knot pattern from above for another five knots.
12. Cut the top loop (starting point) in half
13. Add a drop of adhesive to the inside of the end cap and place all four strands in, give a slight twist and hold everything in place for a few seconds.
14. Repeat step 13 for the opposite side
15. Take the chain provided and judge the exact length you want the final piece to be. Cut chain in half.
16. Attach each side of the chain to the leather piece by attaching chain to end cap with jump ring. Repeat process to other end cap and chain.
17. Attach the lobster claw to one end of your chain with a jump ring. Add a jump ring to other chain end.
18. Voila!!!! You are done! Now go show off your work of art for the world to see!

Visual look at how you will continue your necklace braids:

Other Examples

Simplify this knot by making one knot and adding a gemstone pendant to it’s center loop!

You can even make a smaller version for earrings!

Our GoodyBeads Designers came together to challenge their skills in designing with one product. Today’s product is the Long Drop Chandelier Earrings/Pendants (Z013693). Check out our three different pairs of earrings our designers came up with.

Get this featured component today and have fun creating!

Heidi Tassel Chandelier Earrings

Heidi’s design is true to her love of tassels and TierraCast components. Her gorgeous design turned out very “HEIDI” like!

Items used in earrings: Z013693, Z014010, TC00201 (6),  TCZ0077, TC01259 (12)

Tory Acetate Post Earrings

Tory created some Statement Earrings with a beautiful acetate component and Swarovski® round crystals. Plus, playing off on a popular jewelry trend, she finished off her design with Post Earrings.

Items used in earrings: Z012450, Z013693, A008182, Z011550, A001529, Z007586,  Z008989, Z019697, SW00100 (2)

So Moon & Star Earrings

So went rogue and designed a cute pair of earrings with a celestial theme. She created a staggering effect and added a charm to each loop on the chandelier component.

Items used in earrings: Z013693, CH01194, A002413, TC02297, Z020488 (2), TC00055 (2), Z011883 (2)

Learn how easy it is to macrame 3mm deerskin lace on a Woven Straw Ring for a cool and hip pair of earrings!

Macrame is making waves along side the fiber trend. Our Designer, Tory did a tutorial on how to make a single half hitch knot with 3mm deerskin lace around a woven straw ring. It revises our favorite woven straw component into fall fashion and even back to school wear!

What you’ll need:

• Handmade Woven Straw Ring – Z001659
• 3mm LeatherCord USA Deerskin Lace
  OR
• 3mm or 5mm LeatherCord USA Deertan Lace
• Super New Glue
• Earring Finding and 5-6mm jump ring
• Optional tool: Bead Reamer

Tutorial

1. Cut two pieces of 1 meter of lace each.
2. Fold lace in half and make a lark’s head knot on the straw ring. (Make sure to keep the smooth side sitting outwards.)
3. With each strand of lace, make a single half hitch knot working outward around the ring to both sides of the lark’s head knot you made in step 2.
4. Make 6-8 half hitch knots on both sides of the lark’s knot on the straw ring.
5. Take the lace end and tuck it behind your third loop on the backside of your knotted straw ring. Do the same to other end.
6. Add a small dab of glue to keep ends in place.
7. Cut excess lace.
8. Complete your earrings with making a hole in your woven opposite of lace/leather knots, with a bead reamer or awl. Add your earring finding to woven straw with a jump ring and through the hole you made.
9. Repeat all steps for other earrings.

Video Tutorial

Tutorial starts at 4:20 minutes.

Examples

Items used in examples using Deertan lace: Z001659, Z015550, Z015610

In this example, Deertan lace was used. The one the left is 3mm and the left is 5mm.

Items used in earrings: Z001659, A010962, Z008989, A001529