We’re combining seed bead and gemstones together in this FREE bead-stitch Pointed Earrings pattern tutorial.. It involves peyote stitching around a 10mm round gemstone bead and adding bursts of bead around the bezel. This earring pattern uses: 10mm round gemstones, 4mm round gemstones, wire guardians, 11/0 Delica seed beads and 15/0 round seed beads. And earwires, beading thread and needle.

Items used in this example:

• ONX10RD-8 – 10mm Round Onyx Gemstone
• BGA4RD-8 – 4mm Round Black-Gold Amazonite Gemstone
• SB00269 – 11/0 Galvanized Gold Delica Seed Beads
• SB01136 – 15/0 Galvanized Yellow Gold Seed Beads
• A006599 – White Superlon Beading Thread Bobbin
• Z010382 – Gold Plated Wire Guardian
• TCZ0148 – Gold Filled Hoop Earring Wires by Tierracast®
• A006767 – #10 Long English Beading Needles

— CLICK for FREE Downloadable Pattern Tutorial —

–Click HERE for more DIY projects from Goody Beads–

We’ve got a special DIY for your summer outfits! Create a leather bracelet with large-hole gemstones and braided with silk ribbon. This tutorial is a revamp of our previous blog post: Criss Cross Leather Bracelet by Dakota Stones. Check out this blog post for written directions on how to make these bracelets. Plus, below is a previous LIVE episode where Tory demonstrates how to braid and make this leather bracelet!

Items used in bracelets:

• TC02349 – 16.5mm Antique Pewter Amor Round Button by TierraCast®
• A022076 – 2mm Natural Light Brown Round Leather Cord
• A021777 – Tutti Frutti Hand Dyed Silk Ribbon
• RHO8RDLH-8 – Rhodonite Large Hole 8mm Round

Bracelet Video Tutorial

— CLICK HERE to Watch the Facebook Tutorial Video —

— CLICK HERE for more DIY projects from Goodybeads —

Tutorial begins at 3:30 minutes.

Summer is about hot weather and even hotter trends. Layered or Neck-Mess Necklaces are a must-have for summer because they are easy to pair with your casual to dressy outfit. We’ve got a fun DIY for you using many different components like Limited Edition gemstones mixes, seed beads, necklace chain and instant pendants; all layered together.

We love the different gemstone shapes in the Blue Skies gemstone mix, where we used the heishi and round beads in this mix for our layered necklace.

Items used in necklace:

• Z001033 – 32 Inch Rhodium Plated Cable Chain Necklace
• X003062 – 5.5mm Jump Ring
• Y005033 – 6mm Closed Ring
• FTBW0001 – Fine SoftFlex Wire
• X009683 – Limited Edition Clear Blue Skies Candy Jade Mix from Dakota Stones
• SB00106 – 8/0 Galvanized Silver Seed Beads
• A004830 – 2mm Silver Plated Crimp Tubes
• Z010379/Z010376 – Wire Guardians
• CH01180 (1 foot)- 11.6mm Silver Finish Steel Thin Paperclip Cable Chain

Instant Pendant:
– Z016436 – Silver Instant Pendant with Cone
Get the components and pattern tutorial for the instant pendant in the Peyote Tube with Beadalon Instant Pendants blog post.

Directions:

1. Cut paperclip chain in half to make two 6 inch pieces.
2. Cut a 20″ piece of soft flex wire.
3. String on the following:
   1. Seed bead, crimp tube and seed bead.
   2. 5 round gemstones and seed bead. Repeat 6 more times.
   3. Crimp tube and seed bead.
4. Loop one end of flex wire through a Wire Guardian, making sure to loop the wire guardian through a link of a 6″ paperclip chain. Slide flex wire through seed bead and crimp tube. And crimp the tube with crimping pliers. Cut end to leave about a 1/2 inch tail. Slide beads over to repeat and crimp on other end and other chain link.
5. Open a jump ring and slide on other end of paperclip chain and link it to the ends of the chain necklace. This is where all the layers will link on.
6. Cut a 30″ piece of soft flex wire.
7. String on the following bead sections:
   1. Seed bead, crimp tube and seed bead
   2. Two small heishi and seed bead. Repeat and string on 24inches of this sequence.
   3. crimp tube and seed bead.
8. Feed one end of the flex wire through the Wire Guardian, making sure to loop the wire guardian through the end link of the chain necklace. (Same place you attached the paperclip chain in step 5) Slide flex wire through seed bead and crimp tube and make a crimp. Cut end to leave a 1/2 inch tail. Slide all the beads over to hide the tail end and repeat crimping on this this end.

9. Unclasp both of the clasp on the chain necklace. Open jump ring, slide on ring where all the layers are linked at and a closed ring. Do on both sides and add clasp back on.

10. Make peyote tube add to instant pendant. You can find pattern tutorial from the Peyote Tube with Beadalon Instant Pendants with components. Gently open the loop of the instant pendant just big enough to slide chain necklace on. And gently close it.

–Click HERE for more DIY projects from Goodybeads–

So Vang made this pair of earrings during one of our Facebook Lives and it has quickly become a favorite among jewelry makers! Dakota Stones 2mm gemstone cube beads were bead stitched onto a Beadalon® Quick Link, you’ll see on the PDF just how easy this pair of earrings are to make. Plus, check out the live episode where So demonstrates how to make them.

Items used in fringe earrings:

• TQS2CUB-F-B – Turquoise Faceted, Banded 2mm Cube 15-16 Inch
  Use other 2mm cube gemstones for more colors options.
• SB00422 – 11-91051 Galvanized Silver Miyuki Seed Beads Tube
• Z010358 – 20mm Silver Plated Round Solid Quick Links Rings
• A006599 – Size AA White Superlon Beading Thread Bobbin
• TCZ0097 – Sterling Silver Hoop Earring Wires with 2mm Bead
• A006767 – #10 Long English Beading Needles – 4 Pack

— CLICK for FREE Downloadable Pattern Tutorial —

— CLICK for more DIY projects from GoodyBeads–

Video Tutorial

Check out the video tutorial on our Facebook Videos, to watch So demonstrate how to create these pair of earrings as well as a tip to using banded gemstone strands.

Make these cute succulent earrings using TierraCast succulent findings from their Renewal Collection and Crazy Lace Agate gemstones from Dakota Stones.

Items used in earrings:

• TC02874 – 10mm Antique Silver Succulent Earring Post by TierraCast®
• TC02877 (2) – 12mm Antique Silver Succulent Charm by TierraCast
• GCL8RD-M-8 – MATTE Green Crazy Lace Agate 8mm Round 8-Inch
• TC01253 (2) – 2 Inch Silver 21 Gauge Eyepin by TierraCast
• TC01208 (2) – Clear Comfort Earring Back by Tierracast

Directions:

1. Open eyepin loop, slide on succulent charm and close loop.
2. Slide a gemstone onto the eyepin and make a simple loop.
3. Open loop and slide onto loop of post earring. Close loop. Make sure loops on eyepin are parallel and facing the same direction. This will help the succulent dangle to face forward.
4. Repeat all steps for other earring.

— Click HERE for more DIY Projects from GoodyBeads–

Banded stones have seen a rise in popularity recently at Goody Beads, so we’ve recently expanded our line of banded stones. 

Banded strands have two different meanings in the gem community. Banded gemstones, for example, occur when the beads themselves have different minerals laced throughout the stone in noticeably distinct colors. This is common especially in agate geodes, which are fairly common in the US. 

Banded strands have multiple colors of the same stone type in one strand. Most gemstones have different coloring depending on the minerals present in the stone, but have the same chemical formation and crystal structure to still be considered the same stone. In the case of turquoise, because of the oxidation process in chromium it is not uncommon to find traces of brown, different grades of blue and green in the stone. For some turquoise samples, especially those coming from famous mines, rough specimens with these color differences might be discarded or looked over for lacking uniformity. Banded strands allow these specimens to be used and appreciated by gemstone lovers and designers. 

When designing with banded strands, arranging the beads by their shades is a classic staple. Ombre designs have gained popularity as more subtle jewelry has swung back into favor. However, all of the stones on each strand harmonize with each other, so feel free to pick and choose beads from the strand and pair them how you like!

We have banded strands available in a variety of shades, including more natural gemstone colors like sunstone, rhodonite, and tanzanite. If you like bright colors, try amethyst, pink tourmaline, or turquoise.

Our large selection of micro facet gemstones, from our friends at Dakota Stones, are small diamond cut gemstones expertly cut into rounds, rondelles, bicones, cubes and coins. Learn about how these gemstones are cut and get designing with micro facet gemstones in a Cellini Spiral and adding it to a fun memory wire wrap bracelet.

Micro Faceted Gemstones

Dakota Stones’ faceted gemstones ‘are machine cut with industrial-grade diamonds. With the use of new technology, geometry and an understanding of light, which is extremely important for precious stones with strong dispersion, [Dakota Stones] can now make the facets on each stone cleaner, sharper, and more consistent with minimal or no need for polishing. This means…manufacturing mathematically precise cuts on extremely small surfaces while getting the same luster and shine as we would see on large surfaces.’

Now let’s get to designing with small faceted gemstones!

Black Spinel Cellini Spiral Memory Wire Bracelet

The basic design for the cellini spiral is using a 11/0 delica, 11/0 round Miyuki seed bead and 8/0 Miyuki seed bead. In this case, we’re subbing the 8/0 with some gorgeous 4mm rondelle Black Spinel gemstone bead.

Items used in Cellini Spiral pattern:

• BSP4RL-F – 4mm Black Spinel Diamond Faceted Rondelle Beads
• SB00145 – DB041 11/0 Transp. Silver Lined Crystal Delica Seed Beads
• SB00416 – 11-9591 Pearl Ceylon Miyuki Seed Beads
• SB00422 – 11-91051 Galvanized Silver Miyuki Seed Beads
• A006587 – Crystal Fireline Thread 50 Yard Spool (6LB TEST)
• A006767 – #10 Long English Beading Needles – 4 Pack

Items to complete memory wire bracelet:

• WR00120 – Large Silver Heavy Duty Bracelet Memory Wire
• A003566 – 10mm Silver Plated Bali Style Spacer
• CH01105 (6) – 5mm Round Metallic Platinum Leather
• Z006368 – 5mm Silver Brass Cord End Cap – 4 Pack
• ONX10RD-8 – 10mm Onyx Gemstone Round Beads

Directions:

1. Start with 4-5 feet of beading thread. (This is a starting piece, you’ll need to add more to complete the spiral.) Sew on 6 delica beads, 2 pearl beads, 2 silver beads, 2 black spinel beads, 2 silver beads and 2 pearl beads.

2. Tie threads together to create a loop of beads. Tie two knots, making sure to leave a 5-6 inch tail end. Sew through loop once around.

3. You are going to peyote stitch around the looped beads:
– Pick up a delica bead skip a delica on the loop beads, sew through next delica.
– Pick up another delica, skip a delica and sew through next delica.
– Pick up a delica skip first pearl seed bead and sew through next pearl seed bead.
– Pick up a pearl seed bead, skip silver bead and sew through next silver bead.
– Pick up a silver bead, skip first black spinel and sew through next black spinel.
– Pick up a black spinel, skip first silver bead and sew through next silver bead.
– Pick up a silver bead skip first pearl seed bead and sew through next peal seed bead.
– Pick up a pearl bead, skip first delica, sew through next delica and up through the next delica to start the next row.

NOTE: As a helpful tip while you sew around your spiral, when you are picking up a bead, you are picking up the bead corresponding to the bead you just sewn out of. So if you sewed out of a silver seed bead, you should pick up a silver seed bead in your pattern.

4. Repeat step 3 for the next row. By this time, your spiral will start to take shape. Use a 5mm wide dowel to help guide your bead in a spiral shape.

5. Repeat step 3 until you’ve used up all your Black Spinel beads.

NOTE: Between your spiral, you’ll run out of beading thread. To add more, sew your ends through your spiral, looping around a couple of beads before cutting off excess. Add another 4-5 feet of beading thread to your needle, loop around some beads of your spiral before guiding your needle back through the path of where you’ve left off to continue your spiral pattern.

6. Your Cellini spiral is done.

7. To make your memory wire bracelet, make a simple loop to one end of your memory wire with Memory Wire Finishing Pliers.

8. Slide on an onyx bead, spacer, 3 onyx beads, spacer and another onyx bead. Slide end cap and 3 inches of leather and end cap. Slide on Cellini spiral, onyx bead, spacer, 3 onyx beads, spacer and another onyx bead. Slide on another end cap, 3 inches of leather and end cap.

9. Cut excess memory wire with Memory Wire Cutters, leaving about 1/4 to 1/2 inches. Make a simple loop with this end.

We’re kicking off the new year with another month of DIY Project a day. For the entire month of February, every day we will give you a DIY project. We will have everything from simple hoop earrings to fun bead-stitching designs. We’ll incorporate a lot of our favorites like gemstones, crystals, tassels, leather and more! Plus, as a bonus for this month, we have special guest designers to help inspire your month!

Each blog post and project will include a high quality image with a full components list and a simple, easy-to-follow directions.

Here is a calendar and list of our daily DIY projects to get you inspired!

List of Daily Projects:

1. Garnet Gemstone Wire Wrapped Cuff
2. Golden Goddess Earrings with Lapis Gemstones
3. Boho Babe Earrings
4. White Heart-Day Leather Bracelet
5. FLASHBACK Friday: Skipping Heartbeat Earrings
6. Easy Threader Earrings with Pearls
7. Leaf Drop and Straw Necklace with Beadable Accessories
8. Fan Tassel Hoop Earrings
9. Purple Garnet Hoop Earrings with Mircofacet Gemstones
10. Paradise Beading Necklace with Swarovski Crystals
11. Chunky Paperclip Chain Bracelet
12. FLASHBACK Friday: Statement Bib Necklace with Chinese Crystals
13. Cowrie Shell Earrings
14. Carabiner Wrap Bracelet or Necklace
15. Baroque Pearl Tiered Earrings
16. Hanging Earrings with Purple Lace Agates
17. Beadable Fan Earrings with Diamond Drop
18. Large Snowflake Earrings (Winter’s not over yet…)
19. FLASHBACK Friday: Easy Leather Hook Bracelet
20. Half Circle Chain Earrings with Turquoise Seed Beads
21. Hook Wrap Bracelet with Vegan Bolo Leather Cord
22. Starburst Post Earrings with Beadable Pendant
23. Arrow Leather Bracelet
24. Macrame Wheel Earrings
25. Tropical Statement Earrings
26. FLASHBACK Friday: Stone Ripple Leather Bracelet
27. Jacque Tassel Earrings
28. Fringe Earrings with Triangle Link

Make this arrow hook bracelet with flat leather. Leather jewelry pairs well with men and women’s fashion style.

Items used in hook bracelet:

• CH00962 (16) – 5mm Brown Perforated Leather
  Or get length to 2x the length of your wrist plus 1 inch.
• Z014477 – Antique Silver Arrow Clasp for 5mm Flat Leather
• A015699 – Antique Silver Bar with Loop Slider for Flat Leather
  or any other Slider for 10mm Flat Leather
• BCL8RD-8 – 8mm Blue Crazy Lace Agate Round Gemstone Beads
• Z010746 – 2 Inch Silver Plated Bali Style Headpin with 3mm Ball
• A015821 – Super New Glue

Directions:

1. Slide gemstone bead onto the headpin and make a simple loop. Open loop and slide through leather slider bead loop. Close loop.
2. Fold leather piece in half. Slide the slider bead through both leather ends. Pull slider towards the middle to create a loop in the leather.
3. Add a dot of glue in the channel of the arrow clasp and use a toothpick to coat in the inside. Insert both leather ends in the channel and hold it in place for few seconds to adhere. Let bracelet dry for up to 24 hours before wearing.

This pair of earring is very unique because all the findings are handmade using multi-color Artistic Wire. Add the fine beauty of Purple Lace Agate to match the wires for a bold pop of color!

Items used in earrings:

• AW00230 – 20 gauge multi colored artistic wire
• AW00224 – 18 gauge multi colored artistic wire
• AW00236 – 22 gauge multi colored artistic wir
• PCA4RD-8 – 4mm purple crazy lace agate
• PCA8RD-8 – 8mm purple crazy lace agate
• Z014352 – 1.5-2.0 mm green Chinese glass
• Z013504 – 3.0 mm grey Chinese glass
• CH00718 – Chain

Tools:

• Flat nose pliers
• Round nose pliers
• Flush cutter
• Pen or small dowel

Directions:

1. String TEN 4mm gemstone and TEN Chinese glass alternating them on the 22-gauge wire. (Do not cut wire off of spool.)
2. Make a loop an inch from the end then pull one of each bead next to the loop you’ve made and then make a loop on the other side, without cutting wire. Continue making loops, alternating in different directions, while pulling beads up until you have loops after all of the beads.
3. Cut loop of beads from the spool, leaving an inch of wire on either side. Gently wrap it around the pen/dowl working it to form a bead.
4. Slide bead off the pen and onto a 3.25 inch piece of 18-gauge wire. Slide on a 3mm Chinese glass next to the wire bead followed by an 8mm gemstone and another 3mm Chinese glass and make a simple loop. Repeat on the other side and curve thee wire slightly.
5. To make ear wires, cut two 3-inch pieces of 20-gauge wire. Make a loop to one end of both of the wires. Add a 3mm Chinese glass bead to each wire, then bend wires at a 45 degree angle on top of the bead. (Try to bend and make the ear wires both at the same time for consistency.) Wrap wire around pen to create an ear wire shape. Cut off excess wire if needed. Use a soft grit file to smooth out the ends or a Bur Cup tool.        
6. Loop and coil 20-gauge wire with round nose pliers, making a 5-6mm loop. Cut loops to make 2 jump rings.
7.  Trim chain link to have large loops on top and bottom. Cut 2 pieces.
8. Open one loop of your curved gemstone link, slide on a chain link end and close. Repeat to other end of link and chain.
9. Open jump rings you made, slide on both of your other chain ends and through loop of ear wires you made. Close jump rings.
10. Repeat all steps for other earring.

Earring Designed by Tia.

Make a pair of Wire Wrapped Hoop Earrings using 26-gauge wire and 2mm faceted gemstones, all wrapped around a Nunn Design hoop. Though these may be dainty and minimalistic kind of earrings, they certainly don’t act like it. The large hoops and faceted sparkles from the gemstones will have everyone wanting one!

Items used in earrings:

• Z008275 (2) – 50mm Bright .999 Fine Silver Plated Flat Grande Hoop
• AW00215 – 26 Gauge Silver Plated Tarnish Resistant Silver Artistic Wire
  Or WR00035 – 26 Gauge German Bead Wire
• TC02306 – Silver Filled Front Loop Earring Wire by Tierracast®
• PGT2RD-F – 2mm Purple Garnet Diamond Cut Gemstone Faceted Round

Get all the components for this project here

Directions:

1. Cut a 2 feet piece of wire.
2. Wrap 4 coils around the hoop with the wire end. Pinch coils together to keep the coils tight. Slide on 31 beads or half of your gemstones onto the wire.
3. Pick up a gemstone and wrap around the hoop once, making sure to situate the bead on the outer rim of the hoop. Repeat to the rest of the gemstones. Make sure to pinch your coils together to keep your wires tight.
4. End your wire wrapping with 4 coils and cut off excess.
5. Cut a 5″ piece of wire or use the rest of your excess wire. Find the midpoint of your hoop, where you haven’t wire wrapped; this is where you will make your wire loop. Make 3 coils and pinch them together to keep the coils tight. Use your round nose pliers and clamp it next to your coil. How far you clamp in will determine the size of your loop. Wrap your wire around the round nose and downwards. While holding the plier in place, wrap the rest of the wire 3 more times the opposite direction of the first set of coils. Keep coils tight. Cut off excess wire.
6. Open earwire loop and slide on hoop dangle loop you made in step 5. Close loop.
7. Repeat all steps for other earring.

Designed by Kayla Braun-Waletzke

Today’s February Daily DIY features the DIY Bracelet Cuff with Mircofacet Garnet Gemstones from Dakota Stones. Kayla, jewelry designer from Dakota Stones, created this dainty and gorgeous cuff using gemstones wrapped around a Nunn Design cuff with 24-gauge wire.

Items used in this DIY Bracelet:

• WR00044 – 24 Gauge Copper Wire
• Z016187 – Copper Flat Nunn Design Cuff
• CHA4DC-F – Garnet beads from the Chakra Strand

Get all the components for this project here

Directions:

1. Cut a 4′ piece of wire.
2. Starting a third of the way up the cuff, wrap your wire making 4-5 coils. Pinch the coils together to keep the coils close and tight.
3. Slide on a gemstone bead, lay and situate the gemstone on the flat cuff and wrap the wire around the cuff two times, while keeping the gemstone in place.
4. Repeat step 3 to the rest of your gemstones and coiling 2 times between each gemstone. Make sure to pinch your coils together to keep coils tight.
5. At the last coil, make 4-5 coils before cutting off excess.

Jewelry Design by Kayla Braun-Waletzke

Need a gift for the holidays? This easy gift-giving beadable DIY bottle opener is what you’ll want. It’s easy to make and great for a quick gift you can wrap right up. Pair it with some cool looking large-hole gemstones for a masculine vibe.

What you’ll need for DIY Bottle Opener:

• A003253 – Bottle Opener
• Large-Hole Gemstones – Items used in example ATQ10RDLH-8

Directions:

1. Twist of the end of the bottle opener and slide on 4 gemstones.
2. Twist the end back onto the bottle opener end.

Need more easy DIY gift-giving ideas? Check out these Beadable ideas!

Today, Our easy DIY gemstone jewelry is on how to make these fun post earrings using DakotaStones cabochons.

Items used in earrings:

• Z001725/A014133 – Earring Backs
• A014131/Z019552 – Post Earrings
• DakotaStones Cabs – Items used CAB-CHR8DC (2) & CAB-BGS10DC (2)
• A012906 – Needle Filer
• A015821 – Super New Glue

Directions:

1. Take the filer and give the back of the cabs a few light scratches.
2. Wipe the back of the cab. Add a small dot of Super New Glue.
3. gently position the post earrings in the center of the cab back.
4. Repeat for other earring.
5. Leave earrings for a few hours to dry.

Let’s welcome fall with a this fun DIY using LeatherCord USA 1.5mm leather, Blue Crazy Lace large-hole gemstones from Dakota Stones and the perfect findings from TierraCast to pull it all together.

What you’ll need:

• BCL8RDLH-8 – 8mm Blue Crazy Lace Large-Hole Gemstones
• Z019126 – 1.5mm Leather Cord
• TC01913 (3) – 6mm Hammered Barrel Bead
• TC02800 (2) – Crimp End Cap
• Z001256 – 6mm Magnetic Clasp
• Z011500 – Jump Rings

Directions:

1. Cut 4 pieces of leather at 9″.
2. Slide all 4 pieces of leather through a barrel bead and center the bead in the middle of the leather pieces.
3. Divide 2 leather pieces to each side of the barrel bead.
4. On one side, fold the inner leather in half and slide a gemstone bead onto both leather ends.
5. Fold the outer leather strands in half, laying them on either side of the gemstone you added in Step 4 and slide all 4 ends through a barrel bead. Adjust leather strands to lay flat, and slide barrel up close to the gemstone you previously added.
6. Using nylon pliers or a flat nose pliers, gently crimp down on the barrel bead to keep the middle leather and gemstone in place.
7. Repeat steps 4 through 6 to other side of the bracelet.
8. Trim to wrist size and minus about ½ inch; making sure your barrel/gemstone design is centered and you’re making a straight flush cut.
9. Add an end cap to one end of your leather design, making sure all 4 leather strands fit inside and crimp down on your end cap using a flat nose or nylon pliers. Repeat on the other end of the bracelet.
10. Open 1 jump ring and slide on your end cap loop and clasp loop. Repeat on the other end cap loop and magnet end.

— Click HERE for more DIY projects from GoodyBeads–