An easy DIY project we love to make are multi-wrap bracelets with memory wire. Check out this easy video tutorial and examples of multi-wrap bracelets!

Who doesn’t love stackable bracelets? Multi-wrap bracelets with Memory Wire are easy to make and design. This is the prefect project to use up those leftover beads, finally use that favorite strand or to buy more beads! We have tons of Glass beads, Swarovski® Crystals, Gemstones, TierraCast Beads®, Metal Beads, and Leather Cord with a tube or hallow core; the list goes on and on. Check out our previous blog post on How to Make a Leather and Memory Wire Bracelet for more additional information.

Charming Wrap Bracelet with Swarovski Crystals – Video Tutorial

For this bracelet, we used our GoodyBeads Master Mixes with Swarovski® bicone crystals and silver seed beads. The Master Mixes is an exclusive mix designed with 4-5 different 4mm bicone crystals. Alternate a crystal and seed bead in no particular order for a simple, sparkly bracelet!

Items used for bracelet: MX00035, SB00106, WR00127

Here are more examples of multi-wrap bracelet with instructions.

Mermaid Cove Bracelet

For this bracelet, we used a combination of Mermaid Dream Master Mix, Blue Green Druzy beads, Druk Czech Glass and seed beads. Items used for bracelet: GL-6RD-M0003, GL-6RD-90215, MX00009, WR00127, DAG6RD-BG-F-8, SB00106

1. Start with cutting at least 5 coils of memory wire with Memory Wire Cutter. Make a loop at one end with a Memory Wire Finishing Pliers.String on a seed bead and 4 Matte Crystal Druk. Repeat this sequence for a total of 8 sections.
2. Add a seed bead and a bicone crystal from the Master Mix. Repeat by mixing up the colors from the Master Mix for a total of 33-35 Swarovski crystals.
3. Add a seed bead and 4 Druzy beads. Repeat this sequence for a total of 9 sections.
4. Add a seed bead and 4 Bronze Druk beads. Repeat this sequence for a total of 8 sections.
5. Add one more seed bead and cut excess memory wire leaving a 3/4″ left and make a loop to finish off bracelet.

Boho Wood Wrap-Around Bracelet

Items used for bracelet: WD-GRW6RD, WD-NGK10RD, WD-BKG10RD, WR00121

1. Start with cutting at least 5-6 coils of memory wire with Memory Wire Cutter. Make a loop at one end with a Memory Wire Finishing Pliers.
2. Slide on 20 Nangka Wood (yellow) beads.
3. Slide on a 4mm Grey Wood bead and Nangka Wood. Repeat this sequence for a total of 12 sections.
4. Slide on 33 Grey Wood bead.
5. Slide on a Black Kamagong bead and a grey wood bead. Repeat this sequence for a total of 10 sections.
6. Add one more Black Kamagong bead and cut excess memory wire leaving a 3/4″ left and make a loop to finish off bracelet.

Coastal Edge Bracelet

From our Naturally Coastal Trend, this bracelet is layered with matte seed beads, recycle glass and wood beads. A fun beachside bracelet!  Items used for bracelet: WD-WHW8RD, Y001652, A002433, SB00561, WR00121.

1. Start with cutting at least 5-6 coils of memory wire with Memory Wire Cutter. Make a loop at one end with a Memory Wire Finishing Pliers.
2. Slide on 5 wood rondelle and matte seed bead. Repeat this sequence for a total of 11 sections.
3. Slide on round wood bead and wood rondelle. Repeat this sequence for a total of 17 sections.
4. Slide on recycle bead and matter seed bead. Repeat this sequence for a total of 22 sections.
5. Slide the rest of the bracelet with matte seed beads for a full coil round.
6. Cut excess memory wire leaving a 3/4″ left and make a loop to finish off bracelet.

Cream Aqua Wrap Bracelet

Mix up your bracelet with round leather and curved tube beads! Items used for bracelet: AQIM8RD-8, WAF6RD-8, CH00158 (7″), A007019, Z018411 (6), Z008251, A014097, WR00121

1. Start with cutting at least 5-6 coils of memory wire with Memory Wire Cutter. Make a loop at one end with a Memory Wire Finishing Pliers.
2. Slide on silver bead, 5 wavy disc, 2 White Opal, 3 Aqua Jasper, 2 White Opal, 5 wavy disc and silver bead.
3. Slide on silver tube bead.
4. Repeat step 2.
5. Slide on bead cap, leather, bead cap and silver tube bead.
6. Repeat step 2.
7. Slide on silver tube bead.
8. Cut excess memory wire leaving a 3/4″ left and make a loop to finish off bracelet.

Amazonia Braided Bracelet

Items used for bracelet: WR00121, BGA6RD-M-8, CH00227 (12″), Z011736, TC02469 (2), A002413, TC02439, Z008252

1. Cut 12″ leather in half.
2. Start with cutting at least 4 coils of memory wire with Memory Wire Cutter. Make a loop at one end with a Memory Wire Finishing Pliers.
3. Slide on bead cap, leather cord, bead cap, 5 Amazonite beads, silver TierraCast bead, 5 Amazonite beads and curve tube bead.
4. Next slide 5 Amazonite beads, silver TierraCast bead, 5 Amazonite beads, bead cap, leather and bead cap.
5. Cut excess memory wire leaving a 3/4″ left and make a loop to finish off bracelet.
6. Open jump ring, slide on charm and through loop of curve tube bead. Close jump ring.