Need a fun necklace to complement your summer? Why not try this DIY necklace with Hexagon Straw/Rattan component and thread bead!

Things you’ll need for necklace:

• Hexagon Rattan Straw Component – Z017901
• 3 Inch Gold Plated Headpin – A019680
• Brown Thread Wrap Oval Bead – Z017910
• 6mm Bead Aligner – TC00971 (2)
• Shiny Gold Hammered Disc Connector Charm – Y008224
• 8mm Gold Plated Jump Ring – A011523
• 6mm Gold Plated Jump Ring – Z011522
• Gold Plated Adjustable Rollo Chain Necklace Double Slide Clasp – Z010757

Directions:

1. Slide on a headpin a bead aligner, thread bead and another bead aligner. Make a simple loop, but make it large to slide on straw connector. About 8-10mm around.
2. Taking a Bead Reamer, one side of your round nose pliers or an awl, poke a hole on your rattan at one tip between the first and second outer layer. Repeat to opposite end of your rattan.
3. Open bead thread dangle loop and slide through one hole you made in Step 2. Close loop.
4. Open 8mm jump ring, slide on other hole on rattan connector and through one hole of disc connector. Close jump ring.
5. Open 6mm jump ring, slide through other hole of disc connector and through both rings on adjustable necklace clasp. Close jump ring.