Variations of choker and collar necklaces are making a comeback. Here is our version with Chrysocolla gemstones with 2mm Hematite beads. It sits on your collarbone and creates a different and unique kind of statement.

What you’ll need:

• 3mm Chrysocolla Gemstone Beads – CH3RL-F-AA
• 2mm White Silver Plated Hematite Faceted Round Beads from Dakota Stones – HEMWS2RD-F
• Very Fine Beading Wire – Z003717 or Z004310
• Crimp Tube – A004831
• 5mm Split Ring – Y001368
• 15mm Lobster Claw Clasp – A011535

Directions:

1. Cut beading wire to 24 inches.
2. Slide a crimp tube and split ring onto the beading wire and loop beading wire back down to create a small loop. Make a crimp with crimping pliers. Cut the small excess wire leaving a 1/4 inch tail.
3. Slide on the following bead sequence: 5 gemstone and 1 hematite bead. Repeat this sequence 31 times. Then ending with 5 more gemstones. (Note, you can make a long necklace by using a longer piece of beading wire or shorten the sequence for a closer fit necklace/choker.)
4. Slide on a crimp tube and split ring. Slide beading wire back through crimp tube and a bead or two. Pull wire to keep all your bead in place and crimp your crimp tube. Cut off excess wire.
5. Open split ring and slide lobster clasp loop through.