Make these COLORFUL Triangle Fringe Earrings, bead stitched with size 11 Miyuki Seed Bead. Get the FREE tutorial pattern and template!

Items used in beaded Fringe earrings:

• A006599 – White Superlon Beading Thread Bobbin
• Z021687 – 24mm Rhodium Plated Brass Triangle Frame Connector
  Or Gold Triangle (Z021688)
• TCZ0096 – Sterling Silver Hoop Earring Wires with Loop by Tierracast®
  Or Gold Earring Wires (TCZ0148)
• SB04056 – 11/0 Opaque Glaze Rainbow Shamrock
• SB04048 – 11/0 Opaque Glaze Rainbow Yellow
• SB00439 – 11/0 Matte Metallic Bronze
• SB00444 – 11/0 Matte Opaque Cream
• SB04051 – 11/0 Frost Opaque Glaze Rainbow Cardinal
  OR Try other 11/0 Miyuki Seed Beads

Get all components for this project here

——- CLICK for FREE Downloadable Pattern Tutorial ——-

Plus, with the pattern tutorial, comes with a template so that you can create your own color creations!

Earrings Designed by So Vang

Warmer is weather is on it’s way, so we’re flaunting these gorgeous pair of DIY tassel earrings with long tassels and thread wrapped beads.

Items used in Gold Peacock earrings:

• Z008486 – 2 Inch Satin Hamilton Gold Plated Brass 22 Gauge
• Z017903 – 15x20mm Navy Blue Thread Wrapped Oval Bead
• Z011522 – 6mm Gold Plated 20 Gauge Round Jump Ring
• A011523 – 8mm Gold Plated 20 Gauge Round Jump Ring
• Y003802 – 10x14mm Satin Gold Etched Partial Circle Post 
• Z013832 – 60mm Kelly Green Fabric Tassels
• A022226 – 3.5mm Faceted Bicone Gold Color Over Brass

Get everything for this project here

Items used in Silver Beige earrings:

• Z015094 – 2 Inch Sterling Silver 24 Gauge Eyepins
• Z017911 – 15x20mm Silver Grey Thread Wrapped Oval Bead
• A001530 – 8mm Silver Plated 18 Gauge Round Jump
• A001529 – 6mm Silver Plated 19 Gauge Round Jump 
• Y003800 – 10x14mm Antique Silver Partial Circle Post
• Z013862 – 60mm Taupe Fabric Tassels
• A022224 – 3.5mm Faceted Bicone Silver-Plated Brass Beads

Get everything for this project here

Directions:

1. Open large jump ring, slide on tassel loop and through loop of eyepin. Close jump ring.
2. On eyepin, slide on bicone bead, thread bead and bicone bead. Make a simple loop.
3. Open small jump ring, slide on dangle and through loop of earring. Close jump ring.
4. Repeat all steps for other earring.

Earrings Designed by Jacque

We’re kicking off the new year with another month of DIY Project a day. For the entire month of February, every day we will give you a DIY project. We will have everything from simple hoop earrings to fun bead-stitching designs. We’ll incorporate a lot of our favorites like gemstones, crystals, tassels, leather and more! Plus, as a bonus for this month, we have special guest designers to help inspire your month!

Each blog post and project will include a high quality image with a full components list and a simple, easy-to-follow directions.

Here is a calendar and list of our daily DIY projects to get you inspired!

List of Daily Projects:

1. Garnet Gemstone Wire Wrapped Cuff
2. Golden Goddess Earrings with Lapis Gemstones
3. Boho Babe Earrings
4. White Heart-Day Leather Bracelet
5. FLASHBACK Friday: Skipping Heartbeat Earrings
6. Easy Threader Earrings with Pearls
7. Leaf Drop and Straw Necklace with Beadable Accessories
8. Fan Tassel Hoop Earrings
9. Purple Garnet Hoop Earrings with Mircofacet Gemstones
10. Paradise Beading Necklace with Swarovski Crystals
11. Chunky Paperclip Chain Bracelet
12. FLASHBACK Friday: Statement Bib Necklace with Chinese Crystals
13. Cowrie Shell Earrings
14. Carabiner Wrap Bracelet or Necklace
15. Baroque Pearl Tiered Earrings
16. Hanging Earrings with Purple Lace Agates
17. Beadable Fan Earrings with Diamond Drop
18. Large Snowflake Earrings (Winter’s not over yet…)
19. FLASHBACK Friday: Easy Leather Hook Bracelet
20. Half Circle Chain Earrings with Turquoise Seed Beads
21. Hook Wrap Bracelet with Vegan Bolo Leather Cord
22. Starburst Post Earrings with Beadable Pendant
23. Arrow Leather Bracelet
24. Macrame Wheel Earrings
25. Tropical Statement Earrings
26. FLASHBACK Friday: Stone Ripple Leather Bracelet
27. Jacque Tassel Earrings
28. Fringe Earrings with Triangle Link

Can you just hear the islands calling your names to play? Well, slow down and prep some DIY tropical leaf earrings!

Items used in leaf earrings:

• Y017915 – 10mm Handmade Woven Rattan Straw Round Bead
• Z017902 – 14mm Handmade Woven Rattan Straw Round Bead
• Z021716 – 20x38mm Wood & Olive Resin Leaf
• TC02908 (4) – 4mm Gold Plated Heishi Disk Bead by TierraCast
• TC02912 (4) – 5mm Gold Plated Heishi Disk Bead by TierraCast
• A019617 – 2 Inch Gold Plated 20 Gauge Eyepins
• TCZ0139 – Gold Filled Earring Wire by Tierracast®

Directions:

1. On a eyepin, slide on a 5mm spacer, 14mm straw bead and 5mm spacer. Make a larger simple loop, about 5-7mm in diameter or large enough to slide on loop of the leaf pendant. Open this larger loop, slide on the leaf pendant and close loop.
2. Open loop of another eyepin, slide on loop from the top straw bead in step 1. Close loop. Slide on a 4mm spacer, 10mm straw bead and 4mm spacer. Make a simple loop.
3. Open earwire loop and slide on your dangle piece. Close loop.
4. Repeat all steps for other earring.

Earring Designed by Tory Vezina.

Macrame is still very trendy in 2021, so why not make these DIY Macrame Wheel Earrings! Try out today’s macrame tutorial, making square knots around an acetate ring with Chinese knotting cord.

Items used in earrings:

• Z020493 – 24mm Multi Color Acetate Ring
• A018869 – 1mm Ivory Chinese Knotting Cord
  Or try A018859 – 1mm White Knotting Cord
• SB00106 – 8/0 Galvanized Silver Seed Beads
• TCZ0077 – Sterling Silver Earring Wire by Tierracast®
• Y018889 – 14mm Brushed Silver Plated Flat Ring Connector/Link

Directions:

1.Cut a 24″ piece of knotting cord.

2. Fold 3 inches from the end of your cord and slide loop under the acetate ring and loop ends through to make a lark’s head knot.

3. Take the longer end of the cord, slide under the acetate, through the center and under the cord. Pull cord to tighten it in place.

4. Take longer end of cord, slide through the center of the acetate and over the cord. Pull cord to tighten.

5. Repeat steps 3 and 4 another 17 times.

6. Take both cord ends and make an overhand knot, close to the acetate. Slide on a seed bead on one cord end and make an overhand knot. Slide on 2 beads to the other cord and make an overhand knot. Make both cord ends different length.

7. Open a jump ring, slide through brush silver ring and loop of the knotting cord opposite of your cord dangles. Close jump ring.

8. Open earwire loop, slide on brush silver ring and close loop.

9. Repeat all steps for other earring.

Earring Designed by So Vang.

Make this arrow hook bracelet with flat leather. Leather jewelry pairs well with men and women’s fashion style.

Items used in hook bracelet:

• CH00962 (16) – 5mm Brown Perforated Leather
  Or get length to 2x the length of your wrist plus 1 inch.
• Z014477 – Antique Silver Arrow Clasp for 5mm Flat Leather
• A015699 – Antique Silver Bar with Loop Slider for Flat Leather
  or any other Slider for 10mm Flat Leather
• BCL8RD-8 – 8mm Blue Crazy Lace Agate Round Gemstone Beads
• Z010746 – 2 Inch Silver Plated Bali Style Headpin with 3mm Ball
• A015821 – Super New Glue

Directions:

1. Slide gemstone bead onto the headpin and make a simple loop. Open loop and slide through leather slider bead loop. Close loop.
2. Fold leather piece in half. Slide the slider bead through both leather ends. Pull slider towards the middle to create a loop in the leather.
3. Add a dot of glue in the channel of the arrow clasp and use a toothpick to coat in the inside. Insert both leather ends in the channel and hold it in place for few seconds to adhere. Let bracelet dry for up to 24 hours before wearing.

Today’s DIY features a Beadable Pendant sewn with Miyuki Delica beads and hung on a hoop post earring. Think of all different color ways you can design with this earring.

Items used in post earrings:

• Z011337 – 30mm Gold-Plated Stainless Steel Beadable Ring Pendant
• Y003022 – 21mm Gold Hoop Post Earrings
• SB00269 – Galvanized Gold Delica Seed Beads
• SB02337 – Nile Blue Delica Seed Beads
  Or try other 11/0 Miyuki Delicas Seed Beads
• A011519 – 5mm Gold Plated Jump Ring
• A006587 – 6lb Crystal Fireline Thread
• A006767 – Beading Needle

Directions:

1.Start with 3 feet of beading thread. Add a bead stopper to your end, leaving a 5-6 inch tail.

2. Sew through the top hole/channel, pick up three beads and sew across the channel and down the hole. Ladder stitch around the pendant, following the illustrated pattern:

3. Repeat and sew through the pattern again. At the end, tie both your end together, sew through a bead or two and cut off excess.

4. Open jump ring, slide on beadable pendant and through hoop of earrings. Close jump ring.

5. Repeat all steps for other earring.

— CLICK for FREE Downloadable Pattern Tutorial —

Earring Designed by So Vang

Get hooked on making DIY jewelry because we have this beautiful hook wrap bracelet with vegan bolo leather cord. While it doubles up when you wrap it, it’ll look like you’re wearing a multi strand bracelet!

Items used in wrap bracelet:

• CH01025 (30″) – 4mm Turquoise Braided Cotton Bolo Vegan Leather Cord
  Bracelet fits a 7.5″ size wrist. Add more inches for a wider wrist or lessen for a smaller one.
• Z014457 – Silver Plated Hook Clasp for 4mm Round Leather
• A015821 – Super New Glue

Directions:

1. Fold leather in half. Slide on the slider bead through both leather pieces towards the middle point to create a loop.
2. Add a drop of glue in the hook clasp piece and swirl the glue around to coat or use a toothpick to swab inside.
3. Insert leather ends in and hold it for a few seconds to let it adhere. Let bracelet dry fully before wearing.

Bracelet Designed by Tory

We love a good pair of earrings with movement and these Half Circle Chain Earrings do just that! With a simple POP of turquoise color amidst the silver chain and findings, you’ll especially love how light they are.

Items used in chain earrings:

• Z021697 – 33mm Rhodium Plated Arch Connector
• TCZ0077 – Sterling Silver Earring Wire by Tierracast®
• A008182 (2) – 2.5mm Silver Plated Steel Rollo Chain
• Z007856 – 3mm Silver Plated 22 Gauge Round Jump Rings
• A019647 – 1.5 Inch Silver Plated 22 Gauge Headpins
• A019606 – 1.5 Inch Silver Plated 22 Gauge Eyepins
• SB04011 – 8/0 Matte Opaque Turquoise Seed Bead
• Z019080 – 1×2.5mm Flat Square Heishi Silver Plated Brass Beads

Get everything for this project here

Directions:

1. Slide the following on an eyepin and make simple loop: seed bead, metal bead and seed bead. Make a total of 6 links.
2. Slide the following on a headpin and make a simple loop: seed bead, metal bead and seed bead.
3. Cut 3 chain pieces to 3 inches, 2.5 inches and 2 inches. Make sure the first and last ring of each piece are the same directions.
4. And 1 inch piece with rings opposite directions.
5. Open bead link loop from step 1, slide onto first outer hole of Arch Connector and close loop. Open other loop of bead link, slide on the 3 inch chain, close loop.
6. Open another bead link, slide onto next hole of connector and close loop. Open other loop of bead link, slide on the 2.5 inch chain and close loop.
7. Open another bead link, slide onto third hole of connector and close loop. Open other loop of bead link, slide on the 2 inch chain and close loop.
8. Attach the rest of the other bead links to the other end of the Arch Connector. Open other loop of each bead link and attach the mirrored chain to it.
9. Open jump ring, slide on the 1 inch piece of chain and through the middle loop of Arch Connector. Close jump ring. Open loop of bead dangle, attach to the other end of the inch chain and close loop.
10. Open ear wire loop, flip the Arch Connector so that the smooth backside it facing outwards, slide on connector and close loop.
11. Repeat all steps for other earring.

Earrings Designed by Tory

Winter isn’t over yet. Let’s make these golden snowflake earrings with snowflake acetate pendants with gold findings.

Items used in snowflake earrings:

• Z006136 – 35mm Pearl Acetate Cutout Snowflake Pendant
• CH00998 – 15mm Matte Gold Donut Chain
• A008801 – 5mm Oval Jump Rings
• TC02298 – Gold Filled Front Loop Earring Wire by Tierracast®

Directions:

1. Take two donut links from the chain link.
2. Open jump ring, slide through one hole of donut link and loop of snowflake pendant. Close jump ring
3. Open earwire loop, slide on other hole of donut link and close loop.
4. Repeat all steps for other earring.

Earrings Designed by Tory

We’re combining two fun beadable accessories in these fan earrings. Beadable accessories are easy to use because all you need to do is bead-stitch size 11 delica beads inside the channels. The colors and ideas are endless with beadable accessories.

Items used in fan earrings:

• Z005132 (2) – Beadable 1 to 7 Triangular Link
• Z001471 (2) – Beadable Fan Pendant
• SB03774 – Opaque Cream Delica
• SB04030 – Ocean Spray Delica
  Or try other 11/0 Delica Seed Beads colors.
• SW00664 (2) – 4mm White Swarovski® Pearl
• TCZ0077 – Silver Earring Wire by TierraCast
• A002413 – 4mm Jump Ring
• A006767 – Beading Needles
• A006587 – 6lb Crystal Fireline Thread

——- CLICK for FREE Downloadable Pattern Tutorial ——-

Follow the FREE Pattern to create your own!

Fan Earrings Designed by So Vang

This pair of earring is very unique because all the findings are handmade using multi-color Artistic Wire. Add the fine beauty of Purple Lace Agate to match the wires for a bold pop of color!

Items used in earrings:

• AW00230 – 20 gauge multi colored artistic wire
• AW00224 – 18 gauge multi colored artistic wire
• AW00236 – 22 gauge multi colored artistic wir
• PCA4RD-8 – 4mm purple crazy lace agate
• PCA8RD-8 – 8mm purple crazy lace agate
• Z014352 – 1.5-2.0 mm green Chinese glass
• Z013504 – 3.0 mm grey Chinese glass
• CH00718 – Chain

Tools:

• Flat nose pliers
• Round nose pliers
• Flush cutter
• Pen or small dowel

Directions:

1. String TEN 4mm gemstone and TEN Chinese glass alternating them on the 22-gauge wire. (Do not cut wire off of spool.)
2. Make a loop an inch from the end then pull one of each bead next to the loop you’ve made and then make a loop on the other side, without cutting wire. Continue making loops, alternating in different directions, while pulling beads up until you have loops after all of the beads.
3. Cut loop of beads from the spool, leaving an inch of wire on either side. Gently wrap it around the pen/dowl working it to form a bead.
4. Slide bead off the pen and onto a 3.25 inch piece of 18-gauge wire. Slide on a 3mm Chinese glass next to the wire bead followed by an 8mm gemstone and another 3mm Chinese glass and make a simple loop. Repeat on the other side and curve thee wire slightly.
5. To make ear wires, cut two 3-inch pieces of 20-gauge wire. Make a loop to one end of both of the wires. Add a 3mm Chinese glass bead to each wire, then bend wires at a 45 degree angle on top of the bead. (Try to bend and make the ear wires both at the same time for consistency.) Wrap wire around pen to create an ear wire shape. Cut off excess wire if needed. Use a soft grit file to smooth out the ends or a Bur Cup tool.        
6. Loop and coil 20-gauge wire with round nose pliers, making a 5-6mm loop. Cut loops to make 2 jump rings.
7.  Trim chain link to have large loops on top and bottom. Cut 2 pieces.
8. Open one loop of your curved gemstone link, slide on a chain link end and close. Repeat to other end of link and chain.
9. Open jump rings you made, slide on both of your other chain ends and through loop of ear wires you made. Close jump rings.
10. Repeat all steps for other earring.

Earring Designed by Tia.

One of our fan favorites are the organic Baroque Pearl beads from Swarovski, especially used this tiered earrings from our Baroque Pearl Trend. Its freeform shape has a gorgeous shape at every angle you look at.

Items used in tiered earrings:

• SW02594 (4) – 16mm Cream Crystal Baroque Drop Pearl
• SW02569 (4) – 8mm Cream Crystal Baroque Round Pearl
• Z005963 – 20mm Gold Plated Half Circle Post Earrings with 2 Loops
• A019605 – 1.5 Inch Gold Plated 22 Gauge Eyepins
• A019666 – 1.5 Inch Gold Plated 22 Gauge Headpins
• A011517 – 4mm Gold Plated 20 Gauge Round Jump Ring
• Z006004 (4) – 18mm Gold Plated Stainless Steel Sun Burst Connector

Directions:

1. Slide a baroque round pearl on an eyepin and make a simple loop. Make a total of 4 links.
2. Slide a baroque drop pearl on a headpin and make a simple loop. Make a total of 4 dangles.
3. Open loop of pearl dangle, slide on sunburst connector and close loop.
4. Open loop from pearl link, slide on other end of sunburst connector and close loop.
5. Open jump ring, slide on other end of pearl link, through left loop of earring and close jump ring.
6. Open another pearl dangle loop, slide on another pearl link and close loop.
7. Open loop of other pearl link, slide on another sunburst link and close loop.
8. Open another jump ring, slide on other link of sunburst, through the right loop of earring and close jump ring.
9. Repeat Steps 1-5 and link through right earring loop. Repeat 6-8 and link through left earring loop.

Earring Design by Tory

Fall in love with this versatile piece of jewelry that acts as a necklace and a wrap bracelet. Designed with paperclip chain and a bold carabiner clasp, it’s a showstopper piece with a large Starburst Charm.

Items used in jewelry:

• Z006008 – 20.5mm Stainless Steel Round Starburst Charm
• Z004793 – 20mm Silver Plated Jewelry Carabiner Rhinestone Lock Clasp
• CH01172 (2) – 10.9mm Silver Finish Steel Paperclip Cable Chain
• X003062 – 5.5mm Silver Plated 18 Gauge Round Jump Rings

Get all the components for this project here

Directions:

1. Cut chain to 15 inches.
2. Open jump ring and slide on one end of chain. Close jump ring.
3. Open another jump ring, slide through jump ring from step 2 and through charm loop. Close jump ring.
4. Unscrew carabiner clasp and slide through other end of chain.
5. Wear it wrapped around twice for a wrap bracelet or as a necklace.

Designed by Heidi

Can you hear this DIY calling to you? This pair of cowrie shell earrings is designed with enamel cowrie shells and our fun beadable links. Get this free tutorial today and be summer-ready!

Items used in earrings:

• SB03778 – Sea Opal 11/0 Delica Seed Beads Tube
• SB03818 – Precious Mix 11/0 Delica Seed Beads Tube
  Use gold beads in this mix or use SB00269.
• Y005060 (2) – White Enamel with Gold Finish Cowrie Shell Component
• Z001831 – 8mm Gold Plated Post Earrings
• A006585 – 4lb Crystal Fireline Thread
• AW00025/AW00002 – 20 or 22 Gauge Artistic Wire
• Z005131 (2) – Beadable Link

Directions:

1. Add a foot of beading thread to your needle and add a bead stopper to your thread end, leaving about a 5 inch tail.
2. Sew through one hole of beadable link and pick up Sea Opal and Gold Delica seed beads, alternating between the colors. Pick up a total of 9 beads. Sew down through the other beadable link across the link channel. Sew back through all the beads. Pull off the bead stopper and tie both threads together, tie two times. Sew thread ends through a few beads before cutting off excess.
3. Cut a 3 inch piece of wire. Insert a third of the wire through the shell and fold wire. Wrap the longer piece of wire on top and around the shorter piece of wire.
4. Make a simple loop with the shorter wire.
5. Open loop, slide in beadable link and close loop.
6. Open earwire loop and slide on other end of beadable link.
7. Repeat all steps for other earring.

Video Tutorial

Watch the video tutorial where Tory demonstrates how to make this pair of earrings. Watch it HERE on our facebook page.

Earring design by Tory