Spring will be here before we know, so why not include these DIY playful tassel earrings to your mix of colorful, spring jewelry. Made with our favorite fan tassels and gold findings, they’re so easy you’ll probably want to make more for all your girlfriends too!

Items used in tassel earrings:

• Z017109 – 40mm Gold Plated Brass Hoop Frame
• Z007737 – Turquoise Blue Flat Half Circle Fan Tassel with Gold
• A011517 – 4mm Gold Plated 20 Gauge Round Jump Ring
• TCZ0139 – Gold Filled Earring Wire by Tierracast®

Directions:

1. One end of the hoops can slide out. Don’t slide it out but crimp down by using a needle nose pliers.
2. Open jump ring, slide on tassel loop and through hoop. Close jump ring.
3. Open earwire loop, slide on hoop dangle and close loop.
4. Repeat all steps for other earrings.

For today’s February Daily Project, our DIY Leaf Drop & Straw Necklace may look elaborate and hard to make, but don’t fret because it’s quite easy. With the help of beadable accessories, we’re pulling it together with a straw connector and chain for a stylish necklace! Plus a get the FREE pattern tutorial for this necklace and its beadable accessories.

Items used in necklace:

• SB02336 – 11/0 Spruce Duracoat Opaque Dyed Delica Seed Beads
• SB00269 – 11/0 Galvanized Gold Miyuki Delica Seed Beads
  OR try other 11/0 Delica Colors
• Z001659 – Handmade Woven Rattan Straw Oval Ring Pendant/Connector
• Z005131 (3) – Gold-Plated Stainless Steel Beadable Rectangular Link
• Z018107 – 40mm Gold-Plated Stainless Steel Beadable Oval Pendant
• CH00532 (2) – 2.2mm Gold Plated Soldered Cable Chain
• A008801 – 5mm Gold Plated 21 Gauge Oval Jump Rings
• A011523 – 8mm Gold Plated 20 Gauge Round Jump Ring
• A011517 – 4mm Gold Plated 20 Gauge Round Jump Ring
• A006587 – 6lb Crystal Fireline Thread
• A006767 – Beading Needles

——- CLICK for FREE Downloadable Pattern Tutorial ——-

Designed by So Vang

Threader earrings are very popular among minimalistic jewelry wearers. You can wear it threaded through one pierced hole and have a long dangle earring or if you have two next to each other, you can thread and loop through both. They are easy to wear and even easier to make! Try out this DIY threader earrings with pearl dangle.

Items used threader earrings:

• Z019929 – Sterling Silver Box Chain Ear Threads
• SW02567 (2) – Swarovski® 8mm White Crystal Baroque Round Pearl
• A001494 – 1 Inch Silver Plated 24 Gauge Headpins

Directions:

1. Slide pearl on a headpin and make a simple loop.
2. Open pearl dangle loop and slide on loop of earrings. Close loop.
3. Repeat for other earrings.

Heidi is a fan of silver jewelry and her Boho Babe Earrings definitely hits the mark! Made with silver findings, charms and beads, this easy-to-make pair of earrings will be a staple to your spring style!

Items used in earrings:

• Z017106 – 40mm Silver Plated Brass Hoop Frame
• A010966 – Silver Plated Earring Wire with Bali Style Design
• Y006450 – 12mm Silver Plated Round Disc Drop
• A022190 – 4.5mm Cornerless Cube Silver-Plated Brass Beads
• A008799 – 5mm Oval Silver Plated 21 Gauge Jump Rings
• Z011500 – 4mm Silver Plated 20 Gauge Round Jump Ring
• A015821 – Super New Glue

Get all the components for this project here

Directions:

1. Open a round jump ring, slide on a silver charm and close jump ring.
2. Open an oval jump ring, slide round jump ring from step 1 and close jump ring. Open another oval jump ring, slide through previous oval jump ring and close jump ring.
3. Repeat steps 1 and 2 to make a total of 10 dangles.
4. Gently open the hoop by taking out one of its ends. (Only one side is crimped in, so make sure you pull out the other.)
5. Slide on the the following:
   silver bead, oval ring of silver charm dangle, two silver bead, silver charm, two silver bead, silver charm, two silver bead, silver charm, two silver bead, silver charm, and a silver bead.
6. Add a small dot of glue on the hoop end and slide hoop end back in the slot you took it out of. Use thin flat nose pliers to crimp down this end to secure it.
7. Open earwire loop and slide on hoop dangle. Close loop.
8. Repeat steps 4 -7 for other earring.

Designed by Heidi.

Our February Daily DIY project is all about layering! The DIY Golden Goddess Earrings with Lapis Gemstones are designed by Jacque, who made the amazing Macrame Planter Hanger with Large-Hole Beads last summer. She is showing off her jewelry skills with these post earring made with Lapis gemstones, enamel connector and gold findings.

Items used in Post Earrings:

• Z016675 (2) – 43mm Satin Gold Etched Round Hoop
• Z016258 (2) – 27mm White Enamel Gold Plated Ring Connector Pendant
• Z006000 – 12mm Gold Plated Stainless Steel Sun Burst Post Earrings with Loop
• LAP12DC-8 – 12mm Lapis Coin Gemstone Beads
• A011525 – 9mm Gold Plated 20 Gauge Round Jump Ring
• A011523 – 8mm Gold Plated 20 Gauge Round Jump Ring
• A008801 – 5mm Gold Plated 21 Gauge Oval Jump Rings
• A019662 – 1 Inch Gold Plated 22 Gauge Headpins

Directions:

1. Slide a lapis gemstone onto a headpin and make a simple or wrapped loop.
2. Open 8mm jump ring, slide on one hole of enamel link and through hoop of Gold Etched Round Hoop. Close jump ring.
3. Open 9mm jump ring, slide through other hole of enamel link, lapis dangle and top loop of Gold Etched Round Hoop. You want to make sure the dangle is behind the enamel. Close jump ring.
4. Open oval jump ring, through top loop of Gold Etched Round Hoop and post earring loop. Close jump ring. Make sure the white enamel is facing outwards.
5. Repeat all steps for other earring.

Designed by Jacque

Today’s February Daily DIY features the DIY Bracelet Cuff with Mircofacet Garnet Gemstones from Dakota Stones. Kayla, jewelry designer from Dakota Stones, created this dainty and gorgeous cuff using gemstones wrapped around a Nunn Design cuff with 24-gauge wire.

Items used in this DIY Bracelet:

• WR00044 – 24 Gauge Copper Wire
• Z016187 – Copper Flat Nunn Design Cuff
• CHA4DC-F – Garnet beads from the Chakra Strand

Get all the components for this project here

Directions:

1. Cut a 4′ piece of wire.
2. Starting a third of the way up the cuff, wrap your wire making 4-5 coils. Pinch the coils together to keep the coils close and tight.
3. Slide on a gemstone bead, lay and situate the gemstone on the flat cuff and wrap the wire around the cuff two times, while keeping the gemstone in place.
4. Repeat step 3 to the rest of your gemstones and coiling 2 times between each gemstone. Make sure to pinch your coils together to keep coils tight.
5. At the last coil, make 4-5 coils before cutting off excess.

Jewelry Design by Kayla Braun-Waletzke

Try out this fun DIY bib necklace with deerskin lace fringe and Black Gold Amazonite large-hole gemstone beads from our Deerskin Lace March 2018 Trend.

Exceptionally strong, yet soft and supple, Deerskin Lace is expertly cut from only the finest North American deer hides. Great for all your jewelry and beading projects or for garment lacing. Deerskin Lace is the softest leather lace around. 

Items used in necklace:

• Z010962 – 3mm Saddle Deerskin Lace
  Or any 3mm Leather Lace like (Black/Slate Gray/Chocolate/Buckskin)
• Z021567 – 120mm Open Center Curved Bib Pendant Connector
• BGA8RLLH-M-8 – 8mm Matte Black Gold Amazonite Gemstone Rondelle Large Hole Beads
• CH00034 (2′) – 6mm Antique Silver Plated Cable Chain

Directions:

1. Cut 7 pieces of leather lace at 10 inches.
2. Cut 6 pieces of leather lace at 7 inches.
3. Take a 7″ leather and make a lark’s head knot on the bottom bar of the bib necklace. Repeat 2 more times.
4. Make a lark’s head knot with the 10″ leather, 7 times.
5. Make a lark’s head knot with the 7″ leather, 3 times.
6. Slide a gemstone to the middle strand of your leather fringes and make a knot. Repeat outwards, staggering your knots so that your fringes get shorter and shorter. Make sure your knots are where you’d want them to be and then cut off excess leather.
7. Tie one end of the chain with the side hole of your bib connector with a 3″ piece of leather, twice. Repeat to other side.
8. Optional, you can cut chain in half to add a clasp. Or cut chain shorter for a shorter length.

Feel glamorous in the DIY Midnight Silver Memory Wire Bracelet handmade and designed with Swarovski Fine Rocks Tube, Swarovski® crystals and metal beads on Memory Wire.

Items used in Bracelet:

• A022175 – 3mm Rounded Square Silver-Plated Brass Beads
• Z002570 – 6mm Silver Finished Steel Disc Beads
• A003364 – 6mm Jet Fire Polish
• SW02311 – 44mm Jet and Crystal Metallic Silver Fine Rocks Tube
• SW00112 or SW00398 (6) – 6mm Bicone Crystal
• SW01490 or SW01486 (2) – 6mm Briolette Crystal
• A014097 – 50mm Curved Tube Beads
• Z006368 (4) – End Cap
• CH00156 (8″) – 5mm Braided Black Leather
• WR00120 or WR00121 – Memory Wire

Directions:

1. Cut 3 ½ rings of memory wire.
2. Make a simple loop at one end using a memory wire finishing pliers and add the following bead sequence:
   A. Square bead, fire polish, tube, fire polish, square beads, bicone, square bead, fire polish, tube, fire polish, square bead, end cap, 4 inches of leather, end cap, rondelle, disc, fine rocks, disc, rondelle, end cap, 4 inches of leather and end cap.
   B. 3 fire polish, square bead, bicone and square bead. Repeat 4 times and finish with 3 more fire polish beads.
3. Trim excess memory wire with Memory Wire Cutters leaving about a half an inch and make a simple loop. Tighten each side till beads no longer have extra space to move.

Memory Wire Wrap Bracelets are an easy beginner level to jewelry making. Of course, it’s an easy and fun DIY for all levels. We’ll show you how to make a wrap bracelet with three layers and designing each layer differently.

When designing each layer for your wrap bracelet, you want to give off the look as if you’re wearing multiple bracelets. Since layering is the trend these days, it’s fitting for memory wire bracelets.

For our beginner bracelet, we’re only using three beads:

• 6mm Round Gemstone Beads
• 6mm Wood Beads
• 8/0 Miyuki Seed Beads (SB00106)

With our sample below, you can see that with only three types of beads, you can switch up the layers with different bead combinations. While our main stars are the gemstone and wood beads, using seed beads are a good option for spacing and sectioning grouping of beads. Plus, if you’re concern with your beads rubbing such as glass beads or crystals, a seed bead will help alleviate the rubbing so your beads don’t get chipped while wearing your creation!

Our first layer is our main star, the 6mm gemstone bead. We’ve spaced them out with a seed bead in between to make them pop. The second layer is our second star: wood beads. Since it would be too similar to our first layer to added a seed bead in between, we’ve added a seed bead between each grouping of 5 wood beads. I always find that odd numbers of grouping is pleasing to the eye. And lastly, we’ve incorporated both of our stars and added groupings of wood beads to sandwich between the gemstone beads.

There are a bunch of bead combinations to try out, give it a try!

Items used in bracelet: WR00109, PDA6RD, WD-WH6RL & SB00106.

Instructions:

1. Make a simple loop to one end of the memory wire with Memory Wire Finishing Pliers.
2. Slide on a seed bead and gemstone bead. Repeat until you’ve added 25 gemstones beads. End this row with a seed bead.
3. Slide on 5 wood beads and a seed bead. Repeat until you’ve added 10 groupings.
4. Slide on a gemstone, seed bead, 3 wood beads and seed bead. Repeat 9 more times.
5. Cut memory wire end with Memory Wire Cutters, leaving a 1/4″ or 3/8″ tail. Make a simple loop.

Check out our other Memory Wire Wrap Bracelet with different layer options:

• Satin Wrap Bracelet
• Gold Turquoise Wrap Bracelet
• Memory Wire Leather Bracelets

Make these with your friends during your next virtual get-together and see all the combinations there are!

Pantone has produced their color pick for 2021. Or should we say picks! With 2020 being a rough year for everyone around the world, Pantone’s color picks Ultimate Gray and Illuminating challenges a ‘forward’ thinking for the future. We will dive into Pantone’s meaning for their color picks for 2021 and we’ll give you a fun DIY jewelry to embrace this color combination!

2016 was the year Pantone debuted a first-time, duo-color that blurs the line of femininity and masculinity; Rose Quartz and Serenity. With the current event of 2020, it is no wonder their pick for 2021 doesn’t blur the line of colors but complement two opposite colors that works “together to support one another.” While Ultimate Gray is justly a neutral gray color, Illuminating is a bright yellow, it is “a marriage of color conveying a message of strength and hopefulness that is both enduring and uplifting.“

Pantone states, ” Emboldening the spirit, the pairing of PANTONE 17-5104 Ultimate Gray + PANTONE 13-0647 [Illuminating] highlights our innate need to be seen, to be visible, to be recognized, to have our voices heard. A combination of color whose ties to insight, innovation and intuition, and respect for wisdom, experience, and intelligence inspires regeneration, pressing us forward toward new ways of thinking and concepts.”

How do you feel about Pantone’s picks for 2021?

DIY Beaded Silvery Yellow Diamond Color Block Earrings

We love the color combination and the emboldening message it represents. Here is a fun design using the two colors in our pair of DIY earrings. We’ve made a simple colorblock diamond earrings using Delica beads in a brick stitch.

FOLLOW the FREE Pattern Tutorial for these earrings HERE!

Items used in earrings: SB00290, SB00141, TCZ0078, A006585, A002413 & A006767

Christmas is fast approaching, so here are some last-minute easy DIYs you can whip up in no time and with just a few components. Our ideas consists of Easy Bracelets, Easy Hoop Earrings, DIYs for the Table and DIY Kits.

Easy DIY Bracelets

Here are some easy DIYs for simple bracelets!

• EZDIY Stackable Bracelets
• EZDIY Leather Hook Bracelet
• Leather Safari Bracelet
• Paperclip Charm Bracelets
• Carabiner Clasp Bracelets
• Turquoise Satin Bracelet
• MORE Bracelet Ideas on the Blog

DIY Hook Earrings

Here are some easy DIYs to make trendy hoop earrings:

• Acetate Drop Earrings
• Beachside Hoop Earrings
• Pearl Hoop Earrings
• Skull Earrings
• Hoop Earrings with Classic Cut Crystals
• Straw Hoop Earrings
• More Earrings Ideas on the Blog

DIYs for the Table

Here are some easy DIYs to make for the dinner table, beading table or even your work table:

• Metal Stamped Bookmarks
• Bookmark Tassels
• DIY Wine Stopper with Large Swarovski crystal
• DIY Bottle Opener
• Bead Pens
• Dinner Beadable Gifts

DIY Kits

Need more ideas? Get some DIY kits so you can get started!

We’re celebrating the festive spirit with our friends at Swarovski: Create Your Style and celebrating with New Years Eve colors! Plus, we have a fun DIY project to get you hyped up for the new year.

Here are our selection of Swarovski crystals to embrace the festive and classic colors of New Years:

• White/Clear – Crystal Clear, Crystal AB, Crystal 2XAB & Iridescent Dove Grey Pearl.
• Gold/Bronze – Metallic Sunshine, Golden Shadow, Light Gold, Bright Gold, Crystal Light Silk, Metallic Light Gold, Light Topaz & Light Colorado Topaz
• Silver/Grey – Light Grey, Dark Grey, Silver Night, Silver Shade, Greige, Light Grey Opal

Captivating Crystal Cuff

Items used in cuff: WR00127, SW02445, SW02444 (2), SW002442 (2), SW02437, SW02436 (2), SW02435 (2), Z008287 & SB00106.

Directions:

1. Set the crystal in its setting and gently bend the prongs down to secure the crystal. (Check out Light Topaz blog post on how to press down the prongs.) Repeat to all 5 crystals and settings.
2. Cut two pieces of memory wire at a coil and a quarter.
3. Roll and make a simple loop to each end of the memory wire with memory wire finishing pliers.
4. Slide on a seed bead on each memory wire. Slide each square bead hole through each memory wire. Repeat this process 7 more times. End this portion with a seed bead to each memory wire.
5. Slide on small setting you made in Step 1, slide each memory wire through the two-hole setting. Slide on a seed bead to each memory. Repeat adding a medium setting, seed bead, large setting, seed bead, medium setting, seed bead and small setting.
6. Repeat Step 4.
7. Cut excess wire with memory wire cutters, leaving about a 3/4 inch end and make a simple loop.

Make today a pair of Beaded Frilly Fringe Earrings with size 11/0 seed beads or Delicas. Beaded earrings are everywhere! They are a fun piece for any occasion because of the many color combinations you can create with them. Our FREE DIY is this easy-to-follow pattern tutorial.

What you’ll need:

• Size AA Superlon Beading Thread – These threads are stretchy and will give movement to your fringe patterns.
• A006767 – Beading Needle
• Size 11/0 Round Miyuki Seed Beads
  OR 11/0 Delica Seed Beads
• Earring Finding

——- CLICK for FREE Downloadable Pattern Tutorial ——-

Beaded Frilly Fringe Earrings

Items used in earring sample: SB00444, SB00423, SB00447, TCZ0148, A006599 & A006767.

Items used in earrings: SB00260, SB00128, SB00141, TCZ0077, A006599 & A006767.

NOTE: in this pair of earrings (above), in Steps 3-5 where you are brick stitching each row, you’ll add a TWO delicas to create each row instead of one.

Need more Fringe? Check out these other ideas:

• Heidi’s Earrings
• Metal Fringe Earrings
• Golden Earrings with Ball Chain
• Seed Bead Tassel Earrings
• Falling Waters Necklace

This Gemstone Leather Necklace incorporates the classic black and white colors. It is a fun piece for a business pantsuit or a small dinner party. Made with large-hole gemstones and 1mm leather cord, you can make this in fun necklace in minutes!

What you’ll need for Gemstone Leather Necklace:

• ONX8RDLH-8 – 8mm Onyx Gemstone Round Large Hole Beads
  Check out more Large-Hole Gemstones.
• A022071 – 1mm White Round Leather Cord
  Try other 1mm or 1.5mm leather cord sizes.
• A022211 – 11mm Flat Round Silver-Plated Brass Beads
• Z011500 – 4mm Jump Ring
• Y005033 – 6mm Close Ring
• Z001124 – 12mm Lobster Claw

Directions:

1. Open 4mm jump ring, slide through loop of clasp and close jump ring. Open another 4mm jump ring, slide through closed ring and close jump ring. Open lobster clasp and clasp onto the closed ring.
2. Cut a piece of leather at 27 inches.
3. Slide one end of the leather through a 4mm jump ring in step 1, about 1.5 inch of the way. Make a slip knot. Use pliers to tighten the slip knot before cutting off excess leather end.

4. Slide on the following onto the leather:
3 onyx beads, 5 flat brass beads and 3 onyx beads.
5. Repeat step 3 to other leather end and through other 4mm jump ring from Step 1.

One of our newest products for 2020 is the Carabiner Lock Clasp. We have 5 examples for designing DIY jewelry with this clasp.

Chunky and Cool Bracelets

Items used in bracelets:

• (Left) CH01171 & Z020542.
• (Right) CH00313 & Z004793.

In our bracelet examples above, we’ve only used 2 components: chain and carabiner lock clasps. Because it opens by unscrewing its side, you can easily cut your chain to your bracelet length and slide your chain ends through the clasp. No jump rings required, just fun bracelets to pair with your arm candy collection. Plus, these bracelets are the perfect starter to add your charms or tassels to personalize it!

Neck Mess Love

Items used in necklace:

• (Left) CH01158 (2), Z011522, & Z020547
• (Middle) CH01095 (2-3), A002413, Z008282 & Z004798
• (Right Necklace with Baroque Pearl) Z020541, CH01166 (2′), SW02580, Z006005, X003062 & A019694

In our 3 necklaces, we’re making the clasp the focal/statement piece. Create a fun pendant drop with tassels, charms or baubles. Or design a modern, minimalistic lariat chain necklace.