DIY Pendant Necklace with Layered Crescent Connectors

Channel your celestial side with this DIY Pendant Necklace with Crescent connectors and charms. Here’s what you’ll need to make your own DIY Crescent Pendant Necklace:

• 33mm Hanging Crescent Connector Charm (Z016775/ Gold Z016774)
• 22.4mm Hanging Crescent Connector Charm (Z016773/Gold A016772)
• 13mm Hanging Crescent Connector Charm (Z016771/ Gold A016768)
• 3 feet – 2mm Rollo Chain (CH01090/ Gold A008135)
• 5mm Jump Ring (A001528/ Gold A011519)
  OR
• Buy the SILVER Version as a Buy-All Project – BAP0014
• Buy the GOLD Version as a Buy-All Project – BAP0015

Directions:

1. Open jump ring and slide on small crescent and through hole of concave side on the medium crescent charm. Close jump ring.
2. Open another jump ring, slide on other hole of medium crescent charm and through hole of concave side on large crescent charm. Close jump ring.
3. Open another jump ring, slide on other hole of large crescent charm and close jump ring.
4. Slide your 3 feet of chain through jump ring from step 3.
5. Use another jump ring to link both your chain ends together.
   Note: Adjust necklace length to your preference by cutting off excess chain. For a short length of necklace, use a clasp to attach the chain ends.