When I think about Mother’s Day, I think about pearls. They are what encompasses a mom; they’re precious, glowing and a treasure to have. Plus, these earrings are great to wear for any occasion! The rhinestones are laid around to frame the pearl. You can check out our other Rhinestone Pavé beads for more options!

Items used in earrings:

• Z003029 (2) – 17mm Rhinestone Pavé Embellished Pearl Coin Bead
  Try out other Rhinestone Pavé beads.
• Z009730 – 35mm Gunmetal Kidney with Clear Rhinestone Ear Wire
• A019645 – 1.5 Inch Gunmetal Plated 22 Gauge Headpins

Directions:

1. Slide a bead onto a headpin and make a simple loop.
2. Open dangle loop and slide on the loop part of earring. Close dangle loop.
3. The loop on the earring will need to be pinched to that the dangle doesn’t (run away) slide off of the earwire. Use round nose pliers to gently pinch it to make the opening smaller.
4. Repeat all steps for other earring.

We’re combining two fun beadable accessories in these fan earrings. Beadable accessories are easy to use because all you need to do is bead-stitch size 11 delica beads inside the channels. The colors and ideas are endless with beadable accessories.

Items used in fan earrings:

• Z005132 (2) – Beadable 1 to 7 Triangular Link
• Z001471 (2) – Beadable Fan Pendant
• SB03774 – Opaque Cream Delica
• SB04030 – Ocean Spray Delica
  Or try other 11/0 Delica Seed Beads colors.
• SW00664 (2) – 4mm White Swarovski® Pearl
• TCZ0077 – Silver Earring Wire by TierraCast
• A002413 – 4mm Jump Ring
• A006767 – Beading Needles
• A006587 – 6lb Crystal Fireline Thread

——- CLICK for FREE Downloadable Pattern Tutorial ——-

Follow the FREE Pattern to create your own!

Fan Earrings Designed by So Vang

Threader earrings are very popular among minimalistic jewelry wearers. You can wear it threaded through one pierced hole and have a long dangle earring or if you have two next to each other, you can thread and loop through both. They are easy to wear and even easier to make! Try out this DIY threader earrings with pearl dangle.

Items used threader earrings:

• Z019929 – Sterling Silver Box Chain Ear Threads
• SW02567 (2) – Swarovski® 8mm White Crystal Baroque Round Pearl
• A001494 – 1 Inch Silver Plated 24 Gauge Headpins

Directions:

1. Slide pearl on a headpin and make a simple loop.
2. Open pearl dangle loop and slide on loop of earrings. Close loop.
3. Repeat for other earrings.

Our lariat necklace tutorial today features the popular carabiner clasps, along with our newer Swarovski baroque pearls. Make this necklace long or short, it will be the start of some fun layering neck mess pieces.

Items you’ll need for Lariat Necklace:

• Z020541 – Silver Carabiner Lock Clasp
• CH01166 (2′) – Paperclip Chain
• SW02580 – Baroque Coin Pearl
• Z006005 – Starburst Charm
• X003062 – Jump Ring
• A019694 – Headpin

Directions:

1. Slide pearl onto the headpin and make a larger simple or wrapped loop. Make sure loop can slide on through clasp.
2. Open jump ring, slide on charm and close jump ring.
3. Cut chain to 16 inches. Or cut to your preferred length.
4. Open carabiner clasp by unscrewing clasp, slide on jump ring with charm and pearl drop. Then slide on both ends of your paper clip chain. Close clasp.

Our blog post today consists of three projects in one, using some of Swarovski’s newest pearl shapes! We are really loving these new shapes because they look organic with fun depths to them. Here are three pair of earrings pair the new pearls with some fitting TierraCast components.

Opulent Earrings #1

Items used in earrings: SW02568 (2), SW01454 (4), TC02572 (2), TC02568 & A019612.

Directions:

1. Open eyepin loop, slide on TierraCast charm and close loop.
2. Slide the following on the eyepin and make a simple loop:
   crystal, pearl and crystal.
3. Open dangle loop and slide on earwire loop and close loop.
4. Repeat all steps for other earring.

Opulent Earrings #2

Items used in earrings: SW02579 (2), SW01454 (4), TC02576 (2), TC02297 & A019697.

Directions:

1. Slide the following on to the headpin and make a simple loop:
   Opulent bead, crystal, pearl and crystal.
2. Open ear wire loop, slide on pearl dangle and close loop.
3. Repeat all steps for other earring.

Opulent Earrings #3

Items used in earrings: SW02604 (2), SW01454 (4), TC02562 (2), TC02297 & A019697.

Directions:

1. Slide the following on the headpin and make a simple loop:
   Pearl, crystal, dragon bead and crystal.
2. Open ear wire loop, slide on pearl dangle and close loop.
3. Repeat all steps for other earring.

Hair accessories are very popular this year. From the comeback of scrunchies to oversized fabric headbands, today’s project features a DIY pearl hair pin. Natural pearls are wire wrapped on a Silver Plated Hair Pin with 2 Loops.

What you’ll need for Pearl Hair pin project:

• Z007170 – Hair Pin with 2 Loops
• WR00035 – 26-Gauge Wire
• PRL-WHT7-75PO or PRL-WHT6-65PO
  You can also try other Natural Pearls or Swarovski Pearls

Directions:

1. Cut a 14 inch piece of wire.
2. Loop one time through one end of the wire through a hole of the hair pin. Twist the shorter wire around the other wire twice and push coils close to hole of the hair pin.
3. Slide on 5 beads or how ever many you need to fit between the two holes of the hair pin.
4. Slide wire through other hair pin hole.
5. Criss cross around pearls and back again.
6. Cut off excess.

Video Tutorial

Check out our previous Facebook LIVE episode with this tutorial. Tutorial starts at 10 minutes.

You can hear crashing waves when you wear these By the Sea Earrings. Ok, you might not hear them, but you will definitely want to wear these earrings to your next seaside adventure. It features the brilliant hue of Swarovski® Majestic Blue crystals and the luminescent sheen from the crystal pearls.

What you’ll need to make earrings:

• TC00113 – 14mm Small Spindle Shell Charm by TierraCast
• TC02680 – 13mm Tiny Seastar Charm by TierraCast
• (2) SW01448 – 10mm Crystal Pearlescent White Swarovski Pearl
• (2) SW01446 – 6mm Crystal Pearlescent White Swarovski Pearl
• (2) SW01723 – Swarovski® 4mm Majestic Blue Round Crystal
• (2) SW01725 – Swarovski® 8mm Majestic Blue Round Crystal
• TCZ0077 – Sterling Silver Earring Wire by Tierracast
• A019629 – 1 Inch Silver Plated 20 Gauge Eyepin

Directions:

1. Open eyepin loop, slide on a charm and close loop. Slide a 4mm Majestic Blue crystal on the eyepin and make a simple loop.
2. Open another eyepin loop, slide on loop you made in step 1 and close loop. Slide a 6mm Crystal Pearlescent on eyepin and make a simple loop.
3. Open another eyepin loop, slide on loop you made in step 2 and close loop. Slide an 8mm Majestic Blue crystal on the eyepin and make simple loop.
4. Open another eyepin loop slide on loop you made in step 3 and close loop. Slide a 10mm Crystal Pearlescent on eyepin and make a simple loop.
5. Open earwire loop and slide on loop you made in step 4. Close loop.
6. Repeat all steps for other earring.

Let’s continue our love of summertime jewelry with these cute Pearly Posh Earrings. With only 4 components, you can whip these up in no time!

What you’ll need:

• 65mm Silver Plated Round Connector With Ball Chain Tassel – Z017913 / Gold Z017918
• TierraCast Ear Wire – TCZ0077 / Gold TCZ0139
• 2 Inch Headpin – A019647 / Gold A019669
• (2) 12mm Swarovski Pearl – SW01449 / Shop All 12mm Pearls

Directions:

1. Slide a pearl onto a headpin and make a simple loop.
2. Open up pearl dangle loop and slide through inner loop of connector. Close loop.
3. Open earwire loop and slide on top loop of connector. Close loop.
4. Repeat all steps for other earring.

We’re starting June with one of our favorite style of DIY jewelry-making; memory wire wrap bracelets. Our DIY Wrap Pearl & Denim Blue Bracelet combines some of our favorite components; leather with hollow core, Swarovski pearls and tassels.

What you’ll need for bracelet:

• 5mm Camel Leather – CH00613 (3″)
• 8mm Crystal Pearlescent White Swarovski Pearl – SW01447 (4)
• 6mm Crystal Pearlescent White Swarovski Pearl – SW01446 (2)
• Swarovski® Crystal 8mm Denim Blue Briolette Bead – SW01464 (2)
• Bali Style Curve Bead – A021472 or Y014762
• 8/0 Galvanized Seed Bead – SB00106
• Bali Style Bead Cap – A021121
• Blue Tassel – Z004275
• Regular Bracelet Memory Wire – WR00107/ Large WR00109/ Extra Large WR00111
• TOOLS: Memory Wire Finishing Pliers and Memory Wire Cutter

Direction:

1. Make a simple loop with Memory Wire Finishing Pliers.
2. Slide the the following beads:
   1. 2 seed beads, 6mm pearl, seed bead, curve tube, 8mm pearl, seed bead, 8mm denim blue crystal, seed bead, 8mm pearl.
   2. end cap, 2.5″ of leather, bead cap
   3. 8mm pearl, seed bead, 8mm denim blue crystal, seed bead, 8mm pearl, curve tube, seed bead, 6mm pearl and 2 seed bead.
3. Cut Memory Wire with a 1/2″ to 3/4″ end.
4. Make a simple loop to that end with Memory Wire Finishing Pliers.

Spring is here and flowers are blooming! So we have this sweet DIY flower blossom necklace.

What you’ll need:

• 15mm Pink Purple Allover Flower Lampwork Bead – A020050
• Lilac Purple Tassel with Gold Cap – Z013829
• Gold Eyepin – A019611
• 6mm Swarovski Pink Pearl – SW00741
• Gold Double Chain Necklace – Z007820
• TierraCast Gold Bail – TC02312
• 3mm Gold Ball Bead – Z001310
• 5mm Gold Jump Ring – A011519

Directions:

1. Open jump ring, slide on tassel and eyepin loop. Close jump ring.
2. On eyepin, slide on pearl bead and make a simple loop.
3. Open another jump ring, slide on loop you made in step 2, and another loop of eyepin. Close jump ring.
4. On eyepin you added, slide on gold round bead, flower lampwork and another gold round bead. Make a simple loop.
5. Open loop you made in step 4 and slide on loop of bail. Close loop.
6. Unhook necklace clasp and slide necklace chain through bail.

Pantone has chosen the spotlight color for 2020. Classic Blue. It is a ‘solid and dependable blue hue we can always rely on.’ Here is how Classic Blue is characterized:

Because Pantone has continuously given us variations of blue hues in the past, it can be safe to say that blue is a reliable and dependable color that we all find ourselves designing with and wearing through the years. And it is definitely a bold color. Here are some items to get you inspired with the classic blue:

• Blue Hematite
• Blue Druzy
• Majestic Blue Swarovski® Crystal
• Blue Tassel
• Lapis Gemstone
• Dumortierite Gemstones
• Sodalite Gemstones

Items in image: A008060, Z007741, TC02545, Z006089, SW01800, SW02259, Z015066, SW01736, Z020677, Oval Druzy, HEMMB4RL-F, DAG8RD-BLU-F-8

Here are some easy DIY earrings to get your 2020 started.

Blue Glass Glowing Earrings

We combined some of favorite beads like glass, miracle and Swarovski, tied together with some gold findings! Plus, we just love the gold flakes in the glass bead.

Items used in earrings: SW01726, A019696, A014931, Z018412, SB00107, A019605, Z015066 & A014108

Directions:

1. On a headpin, slide the following beads and make a simple loop:
   3mm Swarovski bicone bead, wavy disc, miracle bead and seed bead.
2. Open eyepin loop and slide on bead dangle from step 1. Close loop.
3. On the eyepin slide on the following and make a simple loop:
   Seed bead, glass bead and seed bead.
4. Open earwire, and slide on your dangle and close loop.
5. Repeat all steps for other earring.

Majestic Blue Drop Earrings

We don’t use much of the kidney earrings, but love them all the same. They work great with a simple drop crystal or charm, as the kidney drapes and elongates the earring itself.

Items used in earrings: (2) SW01840, (2) SW01820, Z003274 & SW01830/TL00264.

Directions:

1. Follow the instructions from our Epoxy Blog Post of mixing your epoxy solution.
2. Add a small dot of mixed epoxy to your glue-in setting.
3. Place your oval crystal stone in the setting, firmly pressed in there.
4. Repeat steps 2 & 3 for other crystal and setting.
5. Let pieces dry or cure for a few hours or until it’s dry.
6. Slide dangle through your kidney earring, through to the loop. Using your round nose, pinch the opening of the loop to cinch loop, gently.

Blue Blue Golden Tassel Earrings

One highlight of our 2019 are tassels and love how this pair of earrings combines our love of tassels and connector/links components!

Items used in earrings: (2) SW00734, (2) Z016742, SB00107, A019605, TCZ0139 & Z006091

Directions:

1. Twist the loop on the tassel 90 degrees so that loop run across the other way.
2. Open tassel loop, slide through hole of half circle connector (curved side). Close loop.
3. Open eyepin and slide through other hole of half circle connector. Close loop.
4. On the eyepin slide on a seed bead, pearl and see bead. Make a simple loop.
5. Open earwire loop and slide on your pearl/tassel dangle. Close loop.
6. Repeat all steps for other earring.

We’ve got FOUR easy projects using November’s Swarovski Psychology of Color: Emerald. Design lovely jewelry with this hue!

Emerald and Pearl Stretch Bracelet

Items used in bracelet: SW00062 (11), SW00665(11), Z001355 & A021634

Directions

1. Cut 9 inches of stretch cord. Pull on elastic to loosen the elasticity.
2. Slide on the stretch cord emerald crystal, gold disc, pearl and gold disc.
   1. Repeat sequence another ten more times.
3. Make a surgeon’s knot with the elastic.
4. Optional: Add a dot of glue.
5. Cut off excess elastic.

Emerald & Pearl Drop Earrings

Items used in earrings: SW00061 (2), SW00666 (2), CH00724, X001505, A021657, Z012031, A015821 & Z002570

Directions

1. Cut two pieces of beading chain at 1 and 3/4 inches. (You can cut it shorter or longer for your length preference.)
2. Glue a memory wire end to one end of the beading chain. Repeat again for other beading chain. Let it dry for a few minutes.
3. Slide on the beading chain: pearl, silver disc and emerald crystal. Repeat again for other beading chain.
4. Slide end cap on beading chain and using your fine nose pliers, crimp the end cap. Repeat again for other end cap and beading chain.
5. Open earwire loop, slide on end cap loop and close loop. Repeat again for other dangle.

Emerald Teardrop Earrings

Items used in earrings: A008182 (or CH01090), SW01994 (2), A008799, Z07856 & Z003694.

Directions

1. Cut two chain pieces at 1 inch. Make sure both chain has the same amount of links and has an even number.
2. Open oval jump ring, slide through one end of your chain and emerald pendant
3. Open small jump ring, slide through other end of chain and through earwire loop.
4. Repeat Steps 2 & 3 for other earring.

Emerald & Acetate Earrings

Items used in earrings: Z013607, Z010571, Z011522, A019600, SW00167 (2) & Z001831

Directions

1. Open jump ring, slide through acetate hole and disc hole. Close jump ring.
2. Open eyepin loop, slide through other hole of gold disc, close loop.
3. Slide an emerald bicone crystal on the eyepin and make a simple loop.
4. Open loop you just made, slide through ear wire loop and close loop.
5. Repeat all steps for other earring.

Tory’s pair of earrings are bold and bright. They feature some of our newest products like acetate components, Textured Half Circle Connectors and Swarovski® pearls in a Mulberry color. We just LOVE the tiered look in these earrings and the vibrant colors from the Mulberry complementing the acetate half circle.

What you’ll need for earrings:

• 37x18mm Multi with White Acetate Half Circle Pendant/Connector – Z012457
• 27x15mm Silver Plated Textured Half Circle – Z014989 (2)
• 20x10mm Silver Plated Textured Half Circle – Z016741 (2)
• Sterling Silver Front Loop Earring Wire by Tierracast® – TC02297
• 1 Inch Silver Plated 21 Gauge Headpins with Ball Top – A019691
• Swarovski® 4mm Crystal Mulberry PinkPearl – SW02198 (2)
• 6mm Round Jump Ring – A001529

Directions:

1. On a headpin, slide on a pearl bead and make a simple loop.
2. Open pearl dangle loop and slide on hole from the small half circle (flat side). Close loop.
3. Open a jump ring, slide on other hole from small half circle and the hole from the larger half circle (flat side). Close jump ring.
4. Open another jump ring, slid eon other hole from larger half circle and hole of acetate connecter (flat side). Close jump ring.
5. Open earwire loop, slide on other hole of acetate connector and close loop.
6. Repeat all steps for other earring.

The new Swarovski pearl color, mulberry, is a bold and fall-suitable hue! We paired it with some colorful acetate components, to make a fun pair of earrings!

Items used in earrings: SW02201 (2), A019612, Z020493, TC02297

Directions:

1. Open eyepin and slide on earwire loop. Close eyepin loop.
2. On the eyepin, slide on pearl and make a simple loop. (Make a larger loop to fit round acetate.)
3. Open loop and slide on acetate ring. Close loop.
4. Repeat all steps for earring.

Acorns are a symbolism of fall weather, so these pair of earrings are fitting for the season.

What you’ll need for earrings:

• 2 – 12mm Swarovski Pearl (SW000816)
• 2 – Brass Acorn End Cap (A001086)
• 2 – 2mm Brass Headpin (TC01258)
• Brass Ball Chain (A015357)
• Brass Clamshell (Z008788)
• Brass Earring Finding (Z002858)

Directions:

1. Cut ball chain with 10 ball links. Cut two pieces.
2. Cup each end of the ball chain with clam shell end caps.
3. On a headpin, slide on a pearl, an end cap and make a simple loop.
4. Open pearl dangle loop and slide on loop of clam shell. Close loop.
5. Open earwire loop and slide on other end of ball chain loop. Close loop.
6. Repeat steps 3 – 5 to other ball chain link.