Our February Daily DIY project is all about layering! The DIY Golden Goddess Earrings with Lapis Gemstones are designed by Jacque, who made the amazing Macrame Planter Hanger with Large-Hole Beads last summer. She is showing off her jewelry skills with these post earring made with Lapis gemstones, enamel connector and gold findings.

Items used in Post Earrings:

• Z016675 (2) – 43mm Satin Gold Etched Round Hoop
• Z016258 (2) – 27mm White Enamel Gold Plated Ring Connector Pendant
• Z006000 – 12mm Gold Plated Stainless Steel Sun Burst Post Earrings with Loop
• LAP12DC-8 – 12mm Lapis Coin Gemstone Beads
• A011525 – 9mm Gold Plated 20 Gauge Round Jump Ring
• A011523 – 8mm Gold Plated 20 Gauge Round Jump Ring
• A008801 – 5mm Gold Plated 21 Gauge Oval Jump Rings
• A019662 – 1 Inch Gold Plated 22 Gauge Headpins

Directions:

1. Slide a lapis gemstone onto a headpin and make a simple or wrapped loop.
2. Open 8mm jump ring, slide on one hole of enamel link and through hoop of Gold Etched Round Hoop. Close jump ring.
3. Open 9mm jump ring, slide through other hole of enamel link, lapis dangle and top loop of Gold Etched Round Hoop. You want to make sure the dangle is behind the enamel. Close jump ring.
4. Open oval jump ring, through top loop of Gold Etched Round Hoop and post earring loop. Close jump ring. Make sure the white enamel is facing outwards.
5. Repeat all steps for other earring.

Designed by Jacque

Nothing says fall better than some wood and gold jewelry! Our pair of earring today uses gold-plated findings with our every-popular wood & resin pendant charms.

Items used in earrings:

• Z004331 – 13mm Satin Gold Rectangle Textured Post Earrings
• Z010290 – 28mm Wood & Clear Resin with Gold Foil Disc Pendant Charm
• Z011522 – 6mm Gold Plated 20 Gauge Round Jump Ring
• TC01208 (2) – Clear Comfort Earring Back by TierraCast®

Directions:

1. Open jump ring, slide on wood/resin charm and loop of earring. Close jump ring.
2. Repeat for other earring.
3. Don’t forget the earring backs!

We are channeling our wild side with these earrings, which consist of paperclip chain and tortoise acetate components.

What you’ll need:

• 26.5mm Jumbo Paper Clip Chain – CH01171 (Silver CH01170)
• 15mm Satin Hamilton Gold Hoop Post Earrings – Y003071 (Silver Y003012)
• 15mm Tortoise Two Hole Coin Connector – Z015021 (Shop other Colors)
• Tortoise Oval Ring Pendant – Z013574 (Shop other Colors)
• 8mm Gold Plated Jump Ring – A011523 (Silver A001530)
• E-6000 – A011455

Directions:

1. On the flat, rimmed side of hoop earring, add a E-6000 to the rim. Gently place the 15mm round acetate connector on the rim, making sure to align the acetate holes with the post vertically. Repeat to other post earring and acetate. Let both pieces dry for a few hours or until glue dries.
2. Gently open paperclip chain to have a link consisting of two links. Before closing the link, slide on oval acetate pendant. Close link.
3. Open jump ring, slide on other chain link and through bottom hole of acetate connector you glued in Step 1.
4. Repeat Steps 2 & 3 for other earring.

Spring is here and flowers are blooming! So we have this sweet DIY flower blossom necklace.

What you’ll need:

• 15mm Pink Purple Allover Flower Lampwork Bead – A020050
• Lilac Purple Tassel with Gold Cap – Z013829
• Gold Eyepin – A019611
• 6mm Swarovski Pink Pearl – SW00741
• Gold Double Chain Necklace – Z007820
• TierraCast Gold Bail – TC02312
• 3mm Gold Ball Bead – Z001310
• 5mm Gold Jump Ring – A011519

Directions:

1. Open jump ring, slide on tassel and eyepin loop. Close jump ring.
2. On eyepin, slide on pearl bead and make a simple loop.
3. Open another jump ring, slide on loop you made in step 2, and another loop of eyepin. Close jump ring.
4. On eyepin you added, slide on gold round bead, flower lampwork and another gold round bead. Make a simple loop.
5. Open loop you made in step 4 and slide on loop of bail. Close loop.
6. Unhook necklace clasp and slide necklace chain through bail.

Today’s tutorial is a revision of popular DIY Golden Fringe Earrings we did a few weeks back. Our Dot & Dash Fringe Earrings is on another level of gorgeous!

What you’ll need for earrings: (Silver alternative available)

• 8 Feet – CH01037 or CH01036
• 1 pair – Z001831 or Z001829 (or make them bold with Z016060)
• Jump rings – A011517 or Z011500
• 20mm Medium Slide End Tube – Z011023 or Z009111

Directions:

1. Cut chain at these lengths and alternate the dots and dashes
   7 inches – Dash at beginning and end
   6 ¼ inches – dot at beginning and end
   5 ¾ inches – dash at beginning and end
   5 inches – dot at beginning and end
   4 ½ inches – dash at beginning and end
   3 7/8 inches – dot at beginning and end
   1 ½ inches – dash at beginning and end
   1 ½ inches – dot at beginning and end
   1 ¾ inches – dash at beginning, dot at end
   1 ¾ inches – dot at beginning, dash at end
   1 ¾ inches – dash at beginning, dot at end
   1 ½ inches – dot at beginning and end
   1 ½ inches – dash at beginning and end
2. Slide what you’ve cut in Step 1, in the same sequence through the slide end tube.
3. Slide the end of 3 7/8 inches through end tube.
4. Slide the end of 4 ½ inches through end tube.
5. Slide the end of 5 inches through end tube.
6. Slide the end of 5 ¾ inches through end tube.
7. Slide the end of 6 ¼ inches through end tube.
8. Slide the end of 7 inches through end tube.
9. Close side tab of end tube with a flat edge, like pliers.
10. Open jump ring and slide on loop of end tube and ear wire loop. Close jump ring.
11. Repeat all steps for other earring.

Enjoy another EZ DIY tutorial with these Green Gold Tassel Earrings with suede tassels and disc connectors.

We adore these suede tassels. We also love how versatile these tassels are. You can keep the long length and use them for a boho necklace pendant. Or cut the length for a short tassel easily used for a charming pair of earrings.

Tutorial

Items used in tutorial: Z010751, A019712 (2) , A014108, Z011522