Feel glamorous in the DIY Midnight Silver Memory Wire Bracelet handmade and designed with Swarovski Fine Rocks Tube, Swarovski® crystals and metal beads on Memory Wire.

Items used in Bracelet:

• A022175 – 3mm Rounded Square Silver-Plated Brass Beads
• Z002570 – 6mm Silver Finished Steel Disc Beads
• A003364 – 6mm Jet Fire Polish
• SW02311 – 44mm Jet and Crystal Metallic Silver Fine Rocks Tube
• SW00112 or SW00398 (6) – 6mm Bicone Crystal
• SW01490 or SW01486 (2) – 6mm Briolette Crystal
• A014097 – 50mm Curved Tube Beads
• Z006368 (4) – End Cap
• CH00156 (8″) – 5mm Braided Black Leather
• WR00120 or WR00121 – Memory Wire

Directions:

1. Cut 3 ½ rings of memory wire.
2. Make a simple loop at one end using a memory wire finishing pliers and add the following bead sequence:
   A. Square bead, fire polish, tube, fire polish, square beads, bicone, square bead, fire polish, tube, fire polish, square bead, end cap, 4 inches of leather, end cap, rondelle, disc, fine rocks, disc, rondelle, end cap, 4 inches of leather and end cap.
   B. 3 fire polish, square bead, bicone and square bead. Repeat 4 times and finish with 3 more fire polish beads.
3. Trim excess memory wire with Memory Wire Cutters leaving about a half an inch and make a simple loop. Tighten each side till beads no longer have extra space to move.

We’re celebrating the festive spirit with our friends at Swarovski: Create Your Style and celebrating with New Years Eve colors! Plus, we have a fun DIY project to get you hyped up for the new year.

Here are our selection of Swarovski crystals to embrace the festive and classic colors of New Years:

• White/Clear – Crystal Clear, Crystal AB, Crystal 2XAB & Iridescent Dove Grey Pearl.
• Gold/Bronze – Metallic Sunshine, Golden Shadow, Light Gold, Bright Gold, Crystal Light Silk, Metallic Light Gold, Light Topaz & Light Colorado Topaz
• Silver/Grey – Light Grey, Dark Grey, Silver Night, Silver Shade, Greige, Light Grey Opal

Captivating Crystal Cuff

Items used in cuff: WR00127, SW02445, SW02444 (2), SW002442 (2), SW02437, SW02436 (2), SW02435 (2), Z008287 & SB00106.

Directions:

1. Set the crystal in its setting and gently bend the prongs down to secure the crystal. (Check out Light Topaz blog post on how to press down the prongs.) Repeat to all 5 crystals and settings.
2. Cut two pieces of memory wire at a coil and a quarter.
3. Roll and make a simple loop to each end of the memory wire with memory wire finishing pliers.
4. Slide on a seed bead on each memory wire. Slide each square bead hole through each memory wire. Repeat this process 7 more times. End this portion with a seed bead to each memory wire.
5. Slide on small setting you made in Step 1, slide each memory wire through the two-hole setting. Slide on a seed bead to each memory. Repeat adding a medium setting, seed bead, large setting, seed bead, medium setting, seed bead and small setting.
6. Repeat Step 4.
7. Cut excess wire with memory wire cutters, leaving about a 3/4 inch end and make a simple loop.

We’re celebrating festive spirit with our friends at Swarovski: Create Your Style and celebrating with Christmas Holiday colors. Plus, we have a fun DIY project to get hype up the holidays.

Here are our selection of Swarovski crystals to embrace the festive and classic colors of Christmas Holiday:

• Reds – Siam, Light Siam, Scarlet, Rouge Pearl & Red Coral Pearl.
• Green – Emerald, Luminous Green Mystic, Vitrail Medium, Olivine, Iridescent Tahitian Look and Eden Green Pearl.
• Yellow/Gold/Bronze: Topaz, Light Topaz, Golden Shadow, Metallic Sunshine, Yellow Opal, Sunflower, Citrine, Copper & Metallic Light Gold,

Red Currant Road Bracelet

Items used in Bracelet: SW02559 (24), SW02635 (5), TC02648 (5), TC01870, TL00265, A011531, Z012973 & Z001065.

Directions:

1. Using alcohol wipes clean all off the links and set aside to dry.
2. Using one 10mm Scarlet fancy stone glue into matching finding. Repeat four more times and set aside to dry for 24 hours.
3. Using one head pin slide on one 6mm Rouge Pearl and make a simple loop. Repeat 23 more times and set aside.
4. Using two 5mm jump rings attach each jump ring separately to the same side of one frame made in Step 2 (double jump ringing). Use two more 5mm jump rings to attach to the opposite side. Repeat this step four more times and set aside.
5. Using two 9mm jump rings, connect together two links made in Step 4 so that it is double jump ringed. Continue this process until all five stone set links are connected.
6. Using three pearl drops, attach to one side of the double medium jump ring connection between stone set links. Repeat for opposite side of the two 9mm jump ring connection. Repeat this step until you have 4 complete sets of 6 pearls between all 5 stone set links.
7. Using one end of the Maker’s toggle attach two small jump rings by attaching each jump ring separately to the same side of the toggle (double jump ringing). Repeat for other side of the toggle piece.
8. To attach the toggles to the ends of the bracelet use two medium jump rings to attach the double jump rings from the bracelet to the toggle. Repeat for the other side.

Bracelet and tutorial courtesy of Swarovski: Create Your Style.