Two Tone Hook Clasp

Today’s product highlight is the Two Tone Hook Clasp it uses two different 4mm or 5mm round cords to make a complete bracelet. See below for instructions on how to make a trendy bracelet with this hook clasp.

 

What you’ll need:

  • Two Tone Hook Clasp (X005030)
  • 3-4″ of 4mm or 5mm Round Leather or Bolo Cord (item used in bracelet: CH01028)
  • 13-16″ of 4mm or 5mm Round Leather or Bolo Cord (item used in bracelet: CH01025)
    OR cord should be double the length of desired wrist size.
  • Super New Glue (A015821)

 

GoodyBeads | Blog - Two Tone Hook clasp with Leather or Bolo Cotton Cord

Directions

  1. Add a drop of glue into the clasp channel, on the side opposite of where the hook is curved. (Swirl glue around to coat the channel)
  2. Fold the short piece of round cord and insert both cord ends into glued channel. Hold for a few seconds before letting go of the cords.
  3. Add a drop of glue into the other side of the clasp. (Swirl glue around to coat the channel)
  4. Fold the long piece of round cord and insert both cord ends into the other glued channel. Hold for a few seconds before letting go of the cords.
  5. Let glue set and dry for a few hours before wearing bracelet.