Our love for memory wire extends beyond just bracelets. We have Beadalon memory wire that has a large diameter for necklace jewelry! Here is a dazzling way to making a collar/choker necklace with memory wire, TierraCast cord ends, rhinestone rondelles, LEATHER and tassels!

What you’ll need:

• Necklace Memory Wire (Silver/Gold/Rose Gold)
• 10mm Rhinestone Rondelles (items used in example: A009131/ A009134/ A004482)
• 2 pieces – 6mm TierraCast Cord End (TC02149)
• 10 Inches – 6mm Braid Leather Cord (Item used in example: CH01088)
• 2 pieces – 8mm Swarovski Round Crystal (Item used in example: SW00101)
• 52mm Tassel with Cap (Item used in example: Z004944)

Directions

1. Cut a full circle of memory wire using Memory Wire Cutters.
2. At one end, make a loop using Memory Wire Finishing Pliers.
3. On the memory wire slide on the following pieces:
   Black crystal, green rondelle, black rondelle, fuchsia rondelle, green rondelle, black rondelle, fuchsia rondelle, cord end, leather, cord end, fuchsia rondelle, black rondelle, green rondelle, fushcia rondelle, black rondelle and green rondelle.
4. Cut memory wire with with about 1/2 to 3/4 inch left. Use your finishing pliers to making a loop at their end. Tighten your loop ends if needed.
5. Open loop of tassel and slide on one end of your memory wire loops. Close tassel loop. Repeat to other memory wire end.

Design a modern and boho style earrings with Swarovski Triangle Shaped Sew-On Stone and tassels!

What you’ll need for earrings:

• 2 – 18x21mm Swarovski Triangle Shaped Sew-On Stone – Item used in example: SW002270
• Gold Chain Link – CH00532
• 5mm Gold Jump Ring – A011519
• 3mm Gold Jump Ring – Z007861
• Gold Post Earrings – Z001831
• 2 – 52mm Tassel with Cap – Item used in example: Z006094 

Instructions:

1. Cut chain with 10 links. Cut 2 pieces total.
2. Open 3mm jump ring, slide on tassel loop and close jump ring.
3. Open 5mm jump ring, slide through 3mm from Step 2 and hole of Swarovski triangle (point end). Close jump ring.
4. Open another 5mm jump ring, slide through other Triangle hole and through a piece of chain end. Close jump ring.
5. Repeat Step 4 to other Triangle hole.
6. Open another 5mm jump ring, slide through both chain ends and close jump ring.
7. Open another 5mm jump ring, slide through 5mm from Step 6 and through post earring hole. Close jump ring.
8. Repeat all steps for other earring.

Designed by Tory.

Our DIY lariat feature many of our most popular products: beading chain, tassels, slide clasp, gemstones and clamshell bead tips! Check out all you need to make one of your own along with our previous Facebook LIVE video!

We’ve combined many of our favorite products in this lovely necklace set. It’s adjustable with the sliding clasp, colorful with quality gemstones and simplistic with the popular beading chain. Plus, it’s tied together at the front with clamshell bead tips and tassels!

What you’ll need:

• 3 Feet – Beading Chain (CH00724)
• 2mm Crimp Tube (A004830)
• Clamshell Bead Tip (Z010740)
• 4x5mm Slide on Clasp (Z008576)
• 4mm or 6mm Gemstone Beads
• Spacer Beads (Item used in sample Z019080)
• 52mm Tassel with Cone Cap

Video Tutorial

Blue Impression Jasper Necklace

Items used in necklace: CH00724 (3 feet), A004830, Z010740, Z008576, Z019080, IJR6RL and Z004964.

OR Buy All the Products you need to make this project with this one sku – BAP0013

Purple Impression Jasper Necklace

We’ve used 4mm Purple Impression Jasper & Pyrite Round Beads by Dakota Stones (PPLPYR4RD) in this necklace. It’s definitely a stunning color!

Items used in necklace: CH00724 (3 feet), A004830, Z010740, Z008576, Z019080, PPLPYR4RD and Z006096.

Blue is always one of the most popular color to design with. There’s no exception to how the earthy blues and browns are in this Impression Jasper Rondelle Beads (IJR6RL) look.

Brighten up your days with a DIY rainbow tassel earrings.

These pair of earrings use our popular cap tassels, all strung on hoop earrings! Flaunt this trendy and cheerful look.

Directions

1. Slide the following seed beads and tassels onto the hoop finding:
   Seed bead, purple, seed bead, blue, seed bead, green, seed bead, yellow, seed bead, orange, seed bead, red and seed bead.
2. Slide hoop end through the hole of the other hoop end.
3. Using your round nose pliers, roll a simple loop with the hoop end.
4. Open ear wire loop and slide on loop of tassel hoop. Close ear wire loop.
5. Repeat all steps for other earring.

Items used in earrings: SB00106, A013204, Z013686, Z013685, Z013684, Z013687, Z014017, Z013688, TCZ0078

We have some NEW exclusive enamel components that we could not help but make some gorgeous DIY jewelry with! Here are 5 different DIY jewelry to inspire you!

Enamel Earrings

Items used in earrings: Z001831, (2) Z016108, Z004939, A011517

Directions:

1. Open loop of tassel, slide on a loop on enamel link and close loop.
2. Open jump ring, slide on other loop on enamel link and through hole of post earrings. Close jump ring.
3. Repeat all steps for other earring.

Items used in earrings: (2) Z015957, Z016027, A011517

Directions: Open small jump ring and slide on enamel dangle and loop of post earrings. Close jump ring and repeat.

Enamel Bracelet

Items used in bracelet: Z016188, Z012152

Directions: Open jump rings on adjustable bracelet, slide on a loop from enamel link. Close jump ring. Repeat for other link loop.

Enamel Necklace

Items used in Necklace #1: A002735, (2)A008135, Z016017, A011517, A008808

Directions: 

1. Cut large Oval Chain with 4 Links.
2. Cut 2 inches off of the 2 feet of A008135, rollo chain.
3. Open large jump ring and attach oval chain to the 2″ rollo chain. Close jump ring.
4. Open another large jump ring and attach other end of oval chain and the remainder of the rollo chain. Close jump ring.
5. Open small jump ring, slide on one end of chained piece and through enamel pendant loop. Close jump ring.
6. Repeat step 5 with another small jump ring and other chain end.

Items used in Necklace #2: Z016327, Z007681, (2) CH00976, Z011514, Z011397

Directions:

1. Open large jump ring and slide through one hole of connector pendant and tassel loop. Close jump ring.
2. Open another large jump ring and slide through other hole of connector pendant. Close jump ring.
3. Open oval jump ring and slide on one end of your chain and through jump ring from Step 2. Close jump ring.
4. Repeat Step 3 to other chain end another another oval jump ring.

Fiber jewelry is a trend that keeps coming back in style. Check out this easy tutorial for making a simple adjustable bracelet with out Fabric Adjustable Bracelet Sliding Clasp with Tassels.

What you’ll need for this bracelet:

• Fabric Adjustable Bracelet (Pink/ Teal/ Bordeaux/ Black)
• TierraCast Amor Bar Link
• Nylon Bending Pliers

TIP: If you find that your fiber bracelet or tassel has a kink, wet your fingers and run your fingers along the tassel or bracelet. Let it dampen and dry to straighten out its shape.

Directions:

1. Use nylon bending pliers to bend a curve in the Amor link.
2. Open a jump ring on the adjustable sliding clasp and feed it through one of the holes on the Amor link. Close jump ring.
3. Repeat Step 2 to other jump ring.

Our new stock of Fan Tassels are the perfect component to spice up your summer jewelry. Make these easy DIY earrings today!

What you’ll need for earrings:

• Fan Tassel 
• 37x18mm Acetate Half Circle Pendant/Connector (Z012457, Z012458, Z012459, Z012460, Z012461)
• 5mm Oval Jump Rings (Gold/Silver)
• Ear Wires

Directions

1. Open jump ring and slide through loop of fan tassel and acetate hole on the flat edge side. Close jump ring.
2. Open earwire loop and slide through other hole of acetate. Close loop.
3. Repeat for other earring.

Golden Tortoise Tassel Earrings

Items used in earrings: Z012459, Z007706, A008801, A014108

Posh Pink Tassel Earrings

Items used in earrings: Z012457, Z007738, A008799, A008998

Liven up your summer with these DIY earrings with Straw and Tassels!

Summer jewelry should be fun, colorful and fashionable, just like our Straw & Tassel Earrings. Designed with our NEW straw shapes and tassels, these pair of earrings should be a part of your memorable summer!

What you’ll need for earrings:

• Straw components
• Tassels
• Jump Rings
• Ear Wires
• Bead Reamer or Awl

Beachside Coral Earrings

Directions

1. Using an awl, bead reamer or a solid point like your round nose, poke a hole in between the outer two rings of your straw. This will be where you will add your jump ring.
2. Poke another hole in the opposite end of the hole you made in Step 1.
3. Open jump ring and slide through hole you made in Step 1 or 2 and through the loop of the fan tassel. Close jump ring.
4. Open another jump ring and slide through the other other hole in the straw. Close jump ring.
5. Open small 3mm jump ring and slide through jump ring from Step 4 and loop of ear wire. Close jump ring.
6. Repeat all steps for other earrings.

Specific items used in earrings: A011525, Z007702, Z007861, TCZ0139

Summer Sky Earrings

Directions

1. Using an awl, bead reamer or a solid point like your round nose, poke a hole in between the outer two rings of your straw, at one corner. This will be where you will add your jump ring.
2. Poke another hole in the opposite corner of the hole you made in Step 1.
3. Open large jump ring and slide through hole you made in Step 1 or 2 and through the loop of ear wire. Close jump ring.
4. Open another large jump ring and slide through other hole on straw component. Close jump ring.
5. Open small jump ring, slide through large jump ring from Step 4 and through loop of cone tassel. Close jump ring.
6. Repeat all steps for other earring.

Check out our Facebook LIVE Videos on Tory doing a quick demonstration using these components! Tutorial starts at 9 Minute mark!

We have your summer project with trendy post earrings, designed with acetate and fan tassels! The summertime combo to DIY jewelry.

What you’ll need:

• 18mm Acetate Coin Charm
• 4mm Jump ring
• Post Earrings 
• Fan Tassels
• Super New Glue
• Rubber Back OR Earring Back

Post earrings are everywhere! So what better way to testing out DIY jewelry making than by making post earrings with an acetate focal.

Directions:

1. Right across from hole of your acetate coin, add a small dot of Super New Glue.
2. Place your post earrings over that dot, making sure the post is lined up with the hole of your acetate coin.
3. Repeat Steps 1-2 with other acetate coin. Let dry for an hour.
4. Open jump ring and slide through the hole of the acetate coin and fan tassel. Close jump ring.
5. Repeat to other acetate coin.

Items used in earrings: Z007238, A002413, A014131, Z019335, A015821

Designing DIY tassel earrings with Long Tassels and charming connecting pieces.

Our selection of long tassels are a statement itself when it comes to designing jewelry. Simply attach your tassel to an earring finding or use connecting pieces or charms to accent your designs.

What you’ll need:

• Long Tassels
• Earring Findings
• Links/Connectors OR Charms

Midnight Tassel Earrings

Directions:

1. Open jump ring and slide through tassel loop and one hole of silver connector. Close jump ring.
2. Open Ear wire loop and slide other hole silver connector. Close loop.
3. Repeat all steps for other earring.

Items used in earrings: Z013860, TC00201 (2), TCZ0077, Z004093

Wine Diamond Earrings

Directions:

1. Open oval jump ring and slide through bottom, middle portion of the diamond and through tassel loop. Close jump ring.
2. Open another jump ring, slide through top middle portion of the diamond and close jump ring.
3. Open round jump ring and slide through previous oval jump ring and through ear wire loop. Close jump ring.
4. Repeat all steps for other earring.

Items used in earrings: TC02296, Z004093, A008799, Z013859, Z003213 (2)

Blue Lotus Earrings

Directions:

1. Open 5mm jump ring, slide through tassel loop and bottom loop of lotus charm. Close jump ring.
2. Open 4mm jump ring and slide through top petal of lotus charm. Close jump ring.
3. Open another 4mm jump ring and slide through previous 4mm jump ring and ear wire loop. Close jump ring.
4. Repeat all steps for other earring.

Items used in earrings: Z013826, TC02442 (2), A002413, Z004093, Z001008