We’re celebrating the festive spirit with our friends at Swarovski: Create Your Style and celebrating with New Years Eve colors! Plus, we have a fun DIY project to get you hyped up for the new year.

Here are our selection of Swarovski crystals to embrace the festive and classic colors of New Years:

• White/Clear – Crystal Clear, Crystal AB, Crystal 2XAB & Iridescent Dove Grey Pearl.
• Gold/Bronze – Metallic Sunshine, Golden Shadow, Light Gold, Bright Gold, Crystal Light Silk, Metallic Light Gold, Light Topaz & Light Colorado Topaz
• Silver/Grey – Light Grey, Dark Grey, Silver Night, Silver Shade, Greige, Light Grey Opal

Captivating Crystal Cuff

Items used in cuff: WR00127, SW02445, SW02444 (2), SW002442 (2), SW02437, SW02436 (2), SW02435 (2), Z008287 & SB00106.

Directions:

1. Set the crystal in its setting and gently bend the prongs down to secure the crystal. (Check out Light Topaz blog post on how to press down the prongs.) Repeat to all 5 crystals and settings.
2. Cut two pieces of memory wire at a coil and a quarter.
3. Roll and make a simple loop to each end of the memory wire with memory wire finishing pliers.
4. Slide on a seed bead on each memory wire. Slide each square bead hole through each memory wire. Repeat this process 7 more times. End this portion with a seed bead to each memory wire.
5. Slide on small setting you made in Step 1, slide each memory wire through the two-hole setting. Slide on a seed bead to each memory. Repeat adding a medium setting, seed bead, large setting, seed bead, medium setting, seed bead and small setting.
6. Repeat Step 4.
7. Cut excess wire with memory wire cutters, leaving about a 3/4 inch end and make a simple loop.

We’re celebrating festive spirit with our friends at Swarovski: Create Your Style and celebrating with Christmas Holiday colors. Plus, we have a fun DIY project to get hype up the holidays.

Here are our selection of Swarovski crystals to embrace the festive and classic colors of Christmas Holiday:

• Reds – Siam, Light Siam, Scarlet, Rouge Pearl & Red Coral Pearl.
• Green – Emerald, Luminous Green Mystic, Vitrail Medium, Olivine, Iridescent Tahitian Look and Eden Green Pearl.
• Yellow/Gold/Bronze: Topaz, Light Topaz, Golden Shadow, Metallic Sunshine, Yellow Opal, Sunflower, Citrine, Copper & Metallic Light Gold,

Red Currant Road Bracelet

Items used in Bracelet: SW02559 (24), SW02635 (5), TC02648 (5), TC01870, TL00265, A011531, Z012973 & Z001065.

Directions:

1. Using alcohol wipes clean all off the links and set aside to dry.
2. Using one 10mm Scarlet fancy stone glue into matching finding. Repeat four more times and set aside to dry for 24 hours.
3. Using one head pin slide on one 6mm Rouge Pearl and make a simple loop. Repeat 23 more times and set aside.
4. Using two 5mm jump rings attach each jump ring separately to the same side of one frame made in Step 2 (double jump ringing). Use two more 5mm jump rings to attach to the opposite side. Repeat this step four more times and set aside.
5. Using two 9mm jump rings, connect together two links made in Step 4 so that it is double jump ringed. Continue this process until all five stone set links are connected.
6. Using three pearl drops, attach to one side of the double medium jump ring connection between stone set links. Repeat for opposite side of the two 9mm jump ring connection. Repeat this step until you have 4 complete sets of 6 pearls between all 5 stone set links.
7. Using one end of the Maker’s toggle attach two small jump rings by attaching each jump ring separately to the same side of the toggle (double jump ringing). Repeat for other side of the toggle piece.
8. To attach the toggles to the ends of the bracelet use two medium jump rings to attach the double jump rings from the bracelet to the toggle. Repeat for the other side.

Bracelet and tutorial courtesy of Swarovski: Create Your Style.

Our blog post today consists of three projects in one, using some of Swarovski’s newest pearl shapes! We are really loving these new shapes because they look organic with fun depths to them. Here are three pair of earrings pair the new pearls with some fitting TierraCast components.

Opulent Earrings #1

Items used in earrings: SW02568 (2), SW01454 (4), TC02572 (2), TC02568 & A019612.

Directions:

1. Open eyepin loop, slide on TierraCast charm and close loop.
2. Slide the following on the eyepin and make a simple loop:
   crystal, pearl and crystal.
3. Open dangle loop and slide on earwire loop and close loop.
4. Repeat all steps for other earring.

Opulent Earrings #2

Items used in earrings: SW02579 (2), SW01454 (4), TC02576 (2), TC02297 & A019697.

Directions:

1. Slide the following on to the headpin and make a simple loop:
   Opulent bead, crystal, pearl and crystal.
2. Open ear wire loop, slide on pearl dangle and close loop.
3. Repeat all steps for other earring.

Opulent Earrings #3

Items used in earrings: SW02604 (2), SW01454 (4), TC02562 (2), TC02297 & A019697.

Directions:

1. Slide the following on the headpin and make a simple loop:
   Pearl, crystal, dragon bead and crystal.
2. Open ear wire loop, slide on pearl dangle and close loop.
3. Repeat all steps for other earring.

This month’s trip is Grand Canyon in Arizona, USA. Find out how majestic and rugged this iconic location is, from its wild animals to its breathtaking views. Plus, check out the hues Swarovski suggests to inspire your Grand Canyon trip along with a DIY jewelry project for you to try.

USA Grand Canyon

The Earth’s history is truly like no other. Over millions and millions of years this land has formed and then reformed to reveal what we all know as the Grand Canyon. The colorful stratified layers of rock composing the sides of the Grand Canyon change over the course of the day as the sun moves and the light transforms one scene into another leaving us with a view that takes your breath away. These textures and colors provided a boundless source of inspiration.

Grand Canyon – Swarovski Crystal Colors

• Crystal Copper
• Montana
• Smoked Topaz

Grand Canyon Inspired DIY Jewelry

Our inspiration for this bracelet is the soft and supple micro-fiber suede. While we made a single wrap bracelet, you can certain add more length for a multi-wrap bracelet!

What you’ll need for bracelet:

• Z011500 – 4mm Silver Plated Jump Ring
• Y005033 – 6mm Closed Jump Ring
• A008799 – 5mm Silver Plated Oval Jump Ring
• A003564 – 6mm Silver Plated Bali Spacer
• Z007133 – 3mm Natural Ultra Micro-fiber Suede Cord
• A011528 – 1 Inch 21 Gauge Headpin
• Z006938 – 2mm Silver Fold Over Crimp Cord End with Loop
• Z001124 – 12mm Lobster Claws
• (3) SW02544 – Swarovski crystal 4mm Montana Bicone Beads
• (3) SW02541 – Swarovski crystal 4mm Montana Round Beads
• (3) SW02542 – Swarovski crystal 6mm Montana Round Beads
• (3) SW02543 – Swarovski crystal 8mm Montana Round Beads
• (3) SW02522 – Swarovski crystal 4mm Copper Round Beads
• (3) SW02523 – Swarovski crystal 6mm Copper Round Beads
• (3) SW02524 – Swarovski crystal 8mm Copper Round Beads
• (3) SW00214 – Swarovski crystal 4mm Smoke Topaz AB Finish Bicone Beads

Directions:

1. Slide a crystal bead onto a headpin and make a simple loop. Repeat to all crystal beads for a total of 24.
2. Open oval jump ring and slide on a crystal dangle you made in Step 1. Close jump ring. Repeat for all 24 crystal dangle.
3. Cut suede to the length of your bracelet/wrist length minus and inch.
4. At one end of the suede, lay end inside the crimp. Fold and crimp the sides to secure suede end.
5. Slide the following beads on the suede:
   Spacer bead and 3 bead dangles (through oval jump ring).
   Repeat this sequence another 7 more times.
   End with another spacer bead.
6. Fold over the crimp end to other suede end.
7. Open 4mm jump ring, slide on a close ring and through one loop of crimp end. Close jump ring.
8. Open another 4mm jump ring and slide on other crimp end loop. Close jump ring.
9. Open another 4mm jump ring, slide through 4mm jump ring step 8 and through lobster claw loop. Close jump ring.
10. Spread out your spacer beads to center your beads.
    NOTE: if you find that you need more beads, you can add more crystals and spacers to your liking.

This month’s trip is Costa Rica. Find out how tranquil this destination is from its tropical vibe to its endless blue skies. Plus, check out the hues Swarovski suggests to inspire your Costa Rica trip along with a DIY jewelry project for you to try.

Costa Rica

Starting as underwater volcanoes which then surfaced over thousands and thousands of years, Costa Rica has evolved into one of the largest, lush ecosystems in the world. Imagine yourself rappelling down a waterfall, relaxing in hot springs, hiking along the rolling fog of the cloud forest or exploring the pink sandy beaches of the Guanacaste coastline. Theses adventures paired with rich tropical flora and fauna and soft sunsets over crystal blue water were the incredible inspiration for these pieces – and my version of ‘paradise’.

Costa Rica – Swarovski Crystal Colors

• Peridot
• Light Turquoise
• Rose Peach

Costa Rica Inspired DIY Jewelry

Our pair of earrings is cool and bright! It has the simplicity for a warm beach stroll and an elegance for a beach-side patio dinner!

What you’ll need for earrings:

• SW02553 (2) – Swarovski crystal 18mm Light Turquoise Meteor Pendant
• SW00157 (2) – Swarovski crystal 4mm Peridot Bicone
• SW02213 (2) – Swarovski crystal 4mm Rose Peach Shimmer Bicone
• SW02552 (2) – Swarovski crystal 4mm Light Turquoise Bicone
• SB00444 – 11/0 Matte Opaque Cream Seed Bead
  You can sub seed bead for 2mm Pearlescent Pearls SW01920 (8)
• A001494 – 2 Inch Silver Plated Eyepin
• TCZ0077 – Sterling Silver Earring Wire by TierraCast®

Directions:

1. On eyepin, slide on the following:
   seed bead, peridot crystal, seed bead, light turquoise crystal, seed bead, rose peach crystal and seed bead.
2. Make a simple loop about 4mm or large enough to slide on crystal pendant.
3. Open the loop you made in step 2 and slide on crystal pendant. Close loop.
4. Open earring wire loop and slide on on other eyepin loop. Close loop.
5. Repeat all steps for other earring.

This month’s trip is Africa. Find out how beautifully wild this continent is from its earthy tones and bright bold colors. Plus, check out the hues Swarovski suggests to inspire your Africa trip along with a DIY jewelry project for you to try.

Africa

The canvas upon which this continent’s epic story is written is not only beautiful but astonishing. Whether heading out at dawn on a safari game drive following millions of wildebeest on their Great Migration or soaring high in a hot-air balloon to embrace the Serengeti, Africa creates the wildlife encounter of a lifetime. Wherever you find yourself on this big, beautiful continent, you will be touched by the wild lands, rich traditions, artisan craftsmanship and natural beauty – all of which these pieces pay tribute to.

Africa – Swarovski Crystal Colors

• Tangerine
• Fern Green
• Light Siam

African Inspired DIY Jewelry

Our pair of earrings embraces the vibrant colors! It also incorporates Black Kamagong Wood Beads, which breaks up the rich colors and gives it a more organic design, as well as an earthy aspect.

What you’ll need for earrings:

• (2) SW00969 – 4mm Tangerine Bicone Crystal
• (2) SW00968 – 8mm Tangerine Round Crystal
• (2) SW02092 – 4mm Light Siam Shimmer Bicone Crystal
• (2) SW02497 – 9mm Light Siam Pear Cut Pendant
• (2) SW00134 – 6mm Light Siam Bicone Crystal
• (4) SW00370 – 4mm Fern Green Bicone Crystal
• (2) TC02452 – 15x19mm Antique Gold Ethnic Fan Link by TierraCast
• (2) TC02816 – 15mm Bright Gold Hammertone Dagger Bead
• WD-BKG4RD – 4mm Black Kamagong Wood Round Beads\
• Z013671 – 10mm White Fabric Tassel with Gold Cap
• A019617 – 2 Inch Gold plated Eyepins
• A008801 – 5mm Gold Plated Oval Jump Rings
• A011517 – 4mm Gold Plated Round Jump Ring
• A014108 – Gold Plated French Wire Earrings
• SB00423 – 11/0 Galvanized Gold Seed Bead
  OR SB00269 – 11/0 Galvanized Gold Delica Seed Bead

Directions:

1. Open oval jump ring, slide on light siam pendant and eyepin loop. Close jump ring.
2. On eyepin from step 1, slide on the following and make a simple loop:
   seed bead, 4mm fern green bicone, seed bead, wood bead, seed bead, wood bead, seed bead, 4mm tangerine bicone and seed bead.
3. Open another eyepin loop and slide through loop you made in step 2. Close loop.
4. On eyepin, slide on a seed bead, 4mm light siam bicone and seed bead. Make a simple loop. Open loop and slide through first hole of ethnic link and close loop.
5. On another eyepin, slide on the following:
   seed bead, wood bead, seed bead, 8mm tangerine round bead, seed bead, wood bead, seed bead.
6. Make a simple loop about 4-5 in diameter, or large enough to slide on TierraCast dagger bead. Open loop and slide on TierraCast dagger bead.
7. Open another eyepin loop, slide on eyepin loop of previous dangle and close loop. On this eyepin, slide on a seed bead, wood bead, seed bead, 4mm fern green bicone and seed bead. Make a simple loop. Open loop and slide through middle hole of ethnic link and close loop.
8. Open 4mm round jump ring, slide on tassel and loop of another eyepin. Close jump ring.
9. On eyepin, slide on the following and make a simple loop:
   seed bead, wood bead, seed bead, 6mm light siam bicone, seed bead, wood bead and seed bead.
10. Open another eyepin loop and slide on loop you made in step 9. Close loop. Slide the eyepin a seed bead, wood bead and seed bead, and make a simple loop. Open loop and slide last hole of ethnic link. Close loop.
11. Open earwire loop and slide through top of ethnic link and close loop.
12. Repeat all steps for other

This month’s trip is India. Find out how culturally rich and vibrant this country is from its colorful clothing to its exotic cuisine. Plus, bathe in the hues Swarovski suggests to inspire your India trip along with a DIY jewelry project for you to try.

India

One of the oldest civilizations in the world, India is a mosaic of multicultural experiences and rich heritage. Extending from the snow-covered Himalayan mountains to the tropical rain forests of the south, it is impossible to ignore India’s mesmeric conflation of the old and the new. Walking through the bustling city streets you are greeted by a diverse variety of cuisines, arts, crafts, faiths, and nature. Experiencing different textures, sounds and smells triggered the emotion that prompted these designs.

India – Swarovski Colors

• Indicolite
• Light Topaz (Note, we are using Light Colorado Topaz in DIY jewelry)
• Fuchsia

India Inspired DIY Jewelry

What you’ll need for earrings:

• 65mm Gold Plated Round Connector With Dot N Dash Tassel – Z017930
• 9mm Light Colorado Topaz Pear Cut Pendant – SW02491 (2)
• 8mm Indicolite Round Beads – SW02538 (2)
• 4mm Bicone Crystal Fuchsia – SW00126 (2)
• 11/0 Gold Seed Bead – SB00423
• 2 Inch Gold Eyepin – A019611
• Oval Jump Ring – A008801

Directions:

1. Open jump ring, slide on crystal pendant and through inner loop of connector. Close jump ring.
2. Open eyepin loop, slide through top loop of connector and close loop.
3. Slide on the eyepin a seed bead, 8mm round crystal, seed bead, 4mm bicone crystal and seed bead.
4. Open loop you made step 3, slide through earwire loop and close loop.
5. Repeat all steps for other earring.

Take a trip to Austria for this month’s destination. Find out how majestic and traditional this country is from its humble villages to intricate architecture to the majestic mountain. Plus, venture the cool hues Swarovski suggests to inspire your Austria trip along with a DIY jewelry project for you to try.

Austria

Austria may be one of Europe’s smallest countries, but it is also one of the most popular destinations in the world. Whether you’re traversing across its drawbridges or hiking up the Alps, the region’s roaring waters and crisp mountain air will greet you as if you were home. The inspiration of these pieces is derived from a multitude of Austria’s most iconic wonders — deep valleys, vast farmland, whimsical woodlands, raging rivers, and of course, its majestic mountains.

Here are some fun facts:

• Swarovski Kristallwelten or Swarovski Crystal World is located in Austria – featuring a garden, sculptures and playground!
• “Sound of Music” was filmed and set in Salzburg, Austria.
• Many of the Classical music icons were born and lived in Austria, such as Mozart, Beethoven, Strauss, Schubert, and others.
• Arnold Schwarzenegger was born in Austria
• The first zoo was established here.

Austria – Swarovski Colors

Swarovski Create Your Style, has selected three colors to depict the majestic sites of Austria:

• Crystal Clear
• Crystal Clear AB
• Denim Blue

Austria Inspired DIY Jewelry

Using a variation of round and bicone beads in the three colors, we made a chain link necklace by making wrapped loop links. Refer to our Wire Wrapped blog post on a visual tutorial.

What you’ll need:

• 22 or 24 Gauge Wire – Item used AW00025
• 11/0 Galvanized Gold Seed Bead – SB00423
• 4-8mm Round Crystal Beads (Get Suggested Qty of 6/each) – SW00514, SW00515, SW00516, SW00001, SW00002, SW00003, SW00005, SW00006 & SWZ0007.
• 4-8mm Bicone Crystal Beads (Get Suggested Qty of 6/each) – SW00401, SW00504, SW00102, SW00103, SW00104 & SW00105.
• Bracelet Sliding Clasp – Z012152
• Diamond/Charm Connector – Z016366

Directions:

1. Make a wrapped loop to one end of a 2-3 inch piece of wire. Slide on a seed bead, crystal and seed bead. Make another wrapped loop.
2. Create another wrapped loop while sliding on link you made in step 1 before completing the loop. Slide on a seed bead, crystal and seed bead. Make another wrapped loop.
3. Repeat step 2 with various different of crystals to create 7-10 links. With the last link wrapped loop, slide on the diamond link before completing the wrapped loop.
4. Make next set of wrapped beaded links, linking the diamond link in Step 3.
5. Repeat to your desired length. We made a length of 28 inches.
6. Open jump ring of the bracelet sliding clasp and link each end of your beaded links to clasp.

As an alternative, you can use 20 gauge wire and make simple loops to create your beaded links.

We’ve got TWO easy projects using March’s Swarovski Psychology of Color: Amethyst. Design jewelry with this passionate hue!

Amethyst Wrap Bracelet

Items used in bracelet: SB00422, SW02206 (30), SW00084 (20), SW00081 (20), WR00127 & A014097

Directions:

1. Make a simple loop to the end of your memory wire with Memory Wire Finishing Pliers.
2. Slide on the following bead sections onto the memory wire:
   Seed bead, silver curve tube, seed bead, light amethyst crystal, seed bead, amethyst crystal, seed bead, 3 amethyst shimmer crystals, seed bead, amethyst crystal, seed bead and light amethyst crystal.
3. Repeat this sequence 9 more times. Then end with a seed bead.
4. Cut memory wire end leaving a 1/4″ end and make a simple loop.

Ombré Amethyst Earrings

Items used in earrings: SW00198 (4), SW00195 (4), SW00105 (4), SB00422, A019656 & TCZ0077

Directions:

1. On a headpin, slide on the following and make a simple or wrapped loop:
   Amethyst bicone, seed bead, amethyst bicone, seed bead, light amethyst, seed bead, light amethyst, seed bead, clear crystal, seed bead, clear crystal and seed bead.
2. Open earwire loop and slide on crystal dangle. Close loop.
3. Repeat all steps for other earring.

For March, Swarovski’s Psychology of Colors pick is Amethyst. Check out how calming this hue is!

Amethyst is a rich purple hue for a creative and soothing design! Here are some Swarovski colors to matches this hue:

• Light Amethyst
• Amethyst Shimmer
• Lavender DeLite
• Paradise Shine
• Elderberry
• Vitrail
• Tanzanite
• Iris
• Iridescent Red
• Iridescent Purple
• Cyclamen

Amethyst Jewelry

Make sure you stop over to our other blog post for jewelry designed with Amethyst.

For February, Swarovski’s Psychology of Colors pick is Indian Pink. Check out how passionate this hue is!

Indian Pink is a dark pink hue for a playful and passionate design! Here are some Swarovski colors to matches this hue:

• Fuchsia
• Mulberry Pink Pearl
• Antique Pink
• Rose Shimmer
• Rose

Indian Pink Jewelry

Make sure you stop over to our other blog post for jewelry designed with Indian Pink.

We’ve got THREE easy projects using January’s Swarovski Psychology of Color: Light Peach. Design jewelry with this lovely hue!

Just Peachy Earrings with Acetate Drops

This pair of earring combines the sparkle of Swarovski crystals with trendy acetate components.

Items used in earrings: SW02308 (6), Z014422, A001495, SB00422 & TCZ0078.

Directions:

1. Open loop of eyepin and slide through earwire loop. Close loop.
2. On eyepin, slide on a seed bead, 3 crystals and seed bead. Make a simple loop. (Make sure loop is big enough to slide over hole of acetate drop.)
3. Open loop, slide on acetate drop and close loop.
4. Repeat all steps for other earring.

Light Peach Chevron Drop Earrings

Items used in earrings: CH00802, SW02308 (6), SW02307 (4), Z016754, A019605 & A019662

Directions:

1. Cut chain with 3 chevron links.
2. On a headpin, slide on a 6mm and 4mm crystal bead. Make a simple loop.
3. Open crystal dangle loop and slide on chevron chain at the point. Close loop.
4. Open eyepin, slide on other end of chevron chain and close loop.
5. On eyepin, slide on a 4mm, 6mm and 4mm crystal. Make a simple loop.
6. Open loop you made in step 5, slide on post earring loop. Close loop.
7. Repeat all steps for other earring.

Peach Crystal Lariat Necklace

Items used in necklace: CH00724 (2′), SW02308 (5), SW02307 (1), X001505, Z010360, A001495, A001493 & A021442.

Directions:

1. Slide end cap to one end of the chain and crimp end cap. Repeat to other end of chain and end cap.
2. Open eyepin loop, slide on loop of one end cap and close loop. On eyepin, slide on a 4mm crystal and make a simple loop. Open loop and slide on quick link and close loop.
3. Open another eyepin loop and slide on other end cap and close loop. One eyepin, slide on 4mm crystal, metal bead and 4mm crystal. Make a simple loop.
4. On a headpin, slide on a 6mm crystal and 4mm crystal. Make a simple loop. Open loop and slide on loop you made in step 3. Close loop.

Design a pair of DIY Statement Earrings with one our newest color addition in our Swarovski crystals: Scarlet. Scarlet is a cross between a Siam and Ruby color. It has a hint of a deep purple and the vibrance of red. Pair the hue with gold findings for a rich pair of earrings!

Items used in earrings: (2) Z016742, (2) Z014570, A019662, A019605, Z010751, (2) SW02275, (2) SW02273, (2) SW002274, TCZ0139.

Directions:

1. On a headpin, slide on a 4mm crystal and make a simple loop. Open loop and slide on one hole of brush gold disc. Close loop.
2. Open an eyepin loop and other hole of brush gold disn. Close loop.
3. On the eyepin, slide on 6mm crystal and through teardrop hoop from the inside and up. Make a simple loop. Open loop and slide on hole of half circle connector (curved side). Close loop.
4. Open another eyepin loop and slide through other hole of half circle connector. Close loop.
5. On eyepin, slide on 8mm crystal and make a simple loop.
6. Open earwire loop, slide on loop you make in step 5 and close loop.
7. Repeat all steps for other earring.

We’ve got THREE easy projects using December’s Swarovski Psychology of Color: Ruby. Design jewelry with this bold hue!

Ruby Snowflake Ornament

Fitting for the holiday season is making snowflake ornaments! Here’s our version using Ruby crystals, clear crystals and wavy discs.

Items used in ornament: SW00131 (12), SW00102 (12), SW00104 (6), Z018412, SB00423 & A006240

Directions:

1. On a prong, slide on the following and make a simple loop with memory wire finishing pliers:
   1. 3 seed beads, 4mm crystal, disc, ruby crystal, disc, 8mm crystal, disc, ruby crystal, disc, 4mm crystal, 3 seed beads.
2. Repeat the same sequence of beads to each prong.

Ruby Hoop Earrings

Make this pair of trendy hoop earrings!

Items used in earrings: SW00131 (10), TC00278 (4), Z001052 & A015821.

Directions:

1. Slide through the hoop:
   1. bead cap, 5 ruby crystals and bead cap.
2. To the top of the last bead cap, add a small dot of glue. Let this dry for a few minutes to keep bead cap in place with the hoop earrings.
3. Repeat all steps for other earring.

Ruby Rockestar Earrings

These beautiful Ruby crystals really standout next to these grey/black diamond crystals.

Items used in earrings:SW00131 (2), SW02072 (2), TC00278 (2), SB00422, TC00055 (2), A007499 & A001495

Directions:

1. Open eyepin loop, slide on star charm and close eyepin.
2. On the eyepin, slide a seed bead, Ruby crystal, bead cap, 4mm black diamond crystal, and seed bead. Make simple loop.
3. Open dangle loop and slide on post earring loop. Close loop.
4. Repeat all steps for other earring.

For December, Swarovski’s Psychology of Colors pick is Ruby. Check out how passionate this hue is!

While Ruby is not a vibrant red color, its deep hue is nothing but gorgeous!  Here are some Swarovski colors to matches this hue:

• Scarlet
• Siam
• Light Siam

Ruby Jewelry

Make sure you stop over to our other blog post for jewelry designed with Ruby.