Can you just hear the islands calling your names to play? Well, slow down and prep some DIY tropical leaf earrings!

Items used in leaf earrings:

• Y017915 – 10mm Handmade Woven Rattan Straw Round Bead
• Z017902 – 14mm Handmade Woven Rattan Straw Round Bead
• Z021716 – 20x38mm Wood & Olive Resin Leaf
• TC02908 (4) – 4mm Gold Plated Heishi Disk Bead by TierraCast
• TC02912 (4) – 5mm Gold Plated Heishi Disk Bead by TierraCast
• A019617 – 2 Inch Gold Plated 20 Gauge Eyepins
• TCZ0139 – Gold Filled Earring Wire by Tierracast®

Directions:

1. On a eyepin, slide on a 5mm spacer, 14mm straw bead and 5mm spacer. Make a larger simple loop, about 5-7mm in diameter or large enough to slide on loop of the leaf pendant. Open this larger loop, slide on the leaf pendant and close loop.
2. Open loop of another eyepin, slide on loop from the top straw bead in step 1. Close loop. Slide on a 4mm spacer, 10mm straw bead and 4mm spacer. Make a simple loop.
3. Open earwire loop and slide on your dangle piece. Close loop.
4. Repeat all steps for other earring.

Earring Designed by Tory Vezina.

We’re ending the year with one of our favorites from 2020, straw earrings. We’ve paired our colored straw components with LeatherCord USA deerskin leather lace, a soft leather that can easily bend and shape.

Items used in earrings:

• Z010962 – 3mm Saddle Deerskin Leather Lace
• Z016790 – Turquoise Handmade Woven Rattan Straw
• TC02360 – 11mm Brass Oxide Jardin Crimp End Cap by TierraCast®
• Z002858 – Antique Brass Fishhook with 2mm Ball Earwires

Directions:

1. Cut two pieces of leather at 5 inches.
2. Fold one piece of leather and make a lark’s head knot through the straw component. Make sure the leather is laid next to each other and the front of the leather is faced the same way. (Refer to our earrings tutorial to see step 1 and 2 on making a lark’s head knot with leather lace.)
3. Repeat step 2 for other leather piece and straw.
4. Determine the length you want your leather to be. You can cut a 1/4″ off the end of your leather. Make sure it is a flush cut.
5. Cap your leather ends with the TierraCast end cap. Using nylon pliers, crimp the end cap to secure the leather ends. Repeat for other leather and end cap. (As an option, you can add a small dot of E-6000 inside the end cap. Use a toothpick to spread it around. Do not use Super New Glue, it may discolor the leather where it is inserted.)
6. Open earwire loop, slide on end cap loop and close earwire loop. Repeat for other earring.

Christmas is fast approaching, so here are some last-minute easy DIYs you can whip up in no time and with just a few components. Our ideas consists of Easy Bracelets, Easy Hoop Earrings, DIYs for the Table and DIY Kits.

Easy DIY Bracelets

Here are some easy DIYs for simple bracelets!

• EZDIY Stackable Bracelets
• EZDIY Leather Hook Bracelet
• Leather Safari Bracelet
• Paperclip Charm Bracelets
• Carabiner Clasp Bracelets
• Turquoise Satin Bracelet
• MORE Bracelet Ideas on the Blog

DIY Hook Earrings

Here are some easy DIYs to make trendy hoop earrings:

• Acetate Drop Earrings
• Beachside Hoop Earrings
• Pearl Hoop Earrings
• Skull Earrings
• Hoop Earrings with Classic Cut Crystals
• Straw Hoop Earrings
• More Earrings Ideas on the Blog

DIYs for the Table

Here are some easy DIYs to make for the dinner table, beading table or even your work table:

• Metal Stamped Bookmarks
• Bookmark Tassels
• DIY Wine Stopper with Large Swarovski crystal
• DIY Bottle Opener
• Bead Pens
• Dinner Beadable Gifts

DIY Kits

Need more ideas? Get some DIY kits so you can get started!

One of our popular Facebook LIVEs we did previously was these pair of earrings using Sodalite gemstones, straw and Flat Artistic Wire. Get all the components to make this pair of unique earrings.

What you’ll need:

• AW00195 – 21 Gauge Flat Artistic Wire (Silver option: AW00196)
• A019680 – 20 Gauge Headpins (Silver option: A019679)
• SDL12x22-50GP – Sodalite Gemstone Graduated Point
• Z017898 – Rattan Straw Triangle Pendant
• Z013426 – 6mm Twilight Crystal Czech Glass Fire Polish Beads
• Z008990 – 15mm Satin Gold Round Ear Posts (Silver option: Z008989)
• (2) TC00569 – 7mm Gold Nugget Spacer by TierraCast (Silver option: TC00034)
• Punch Pliers – A018918 OR TL00314

Directions:

1. Slide in through the middle and clamp down onto the wire end and piece.
2. Wrap wire around and up. Take off pliers and clamp both sides of the wire and pendant piece.
3. Bend wire to come across the top of the pendant.
4. You can take your sharpie or some fine point marker to mark the top to indicate where you will hope punch for the headpin.
5. Gently pull off wire. Take hole punch to the middle of that dot you made.
6. Slide on headpin, coming under the hole you punched.
7. Slide wire piece back on your pendant piece. Fold wire to the back.
8. Cut wire so that it overlaps with the other wire end.
9. Bend out the bottom end, fold in the top end and bend back the bottom end to overlap. Use nylon pliers or regular pliers to cinch them closed.
10. On the headpin, slide on nugget bead, gemstone and Czech bead and make a simple loop. Open loop and slide on post earring hole. Close loop. (As an option here, you can make a wrapped loop.)
11. Repeat all steps for other earring.

FB Live Video Tutorial

Check out the Video for a tutorial. Tutorial begins at around 8 Minutes.

(opens in a new tab)”>LINK TO VIDEO TUTORIAL HERE >

Sink your feet into this fun DIY. It consists of straw beads and connectors.

What you’ll need for earrings:

• Rattan Straw Round Bead – Z017902
• Rattan Straw Off Center Hoop Pendant – Z017897
• 2 Inch Eyepin – A019599
• TierraCast® Silver Bead Aligner – TC00356 (4)
• 5mm Jump Ring – A001528
• TierraCast® Earring Wire – TC02297

Directions:

1. Using a Bead Reamer, round nose pliers or awl, poke a hole at the top of the off center straw pendant, between the first and second outer ring.
2. Open jump ring, slide through hole you make in Step 1, and through an eyepin loop. Close jump ring.
3. Slide on the following on the eyepin and make a wrapped loop: bead aligner, rattan round bead and bead aligner.
4. Open earwire loop, slide on dangle and close loop.
5. Repeat all steps for other earring.

Need a fun necklace to complement your summer? Why not try this DIY necklace with Hexagon Straw/Rattan component and thread bead!

Things you’ll need for necklace:

• Hexagon Rattan Straw Component – Z017901
• 3 Inch Gold Plated Headpin – A019680
• Brown Thread Wrap Oval Bead – Z017910
• 6mm Bead Aligner – TC00971 (2)
• Shiny Gold Hammered Disc Connector Charm – Y008224
• 8mm Gold Plated Jump Ring – A011523
• 6mm Gold Plated Jump Ring – Z011522
• Gold Plated Adjustable Rollo Chain Necklace Double Slide Clasp – Z010757

Directions:

1. Slide on a headpin a bead aligner, thread bead and another bead aligner. Make a simple loop, but make it large to slide on straw connector. About 8-10mm around.
2. Taking a Bead Reamer, one side of your round nose pliers or an awl, poke a hole on your rattan at one tip between the first and second outer layer. Repeat to opposite end of your rattan.
3. Open bead thread dangle loop and slide through one hole you made in Step 2. Close loop.
4. Open 8mm jump ring, slide on other hole on rattan connector and through one hole of disc connector. Close jump ring.
5. Open 6mm jump ring, slide through other hole of disc connector and through both rings on adjustable necklace clasp. Close jump ring.