One of our popular Facebook LIVEs we did previously was these pair of earrings using Sodalite gemstones, straw and Flat Artistic Wire. Get all the components to make this pair of unique earrings.

What you’ll need:

• AW00195 – 21 Gauge Flat Artistic Wire (Silver option: AW00196)
• A019680 – 20 Gauge Headpins (Silver option: A019679)
• SDL12x22-50GP – Sodalite Gemstone Graduated Point
• Z017898 – Rattan Straw Triangle Pendant
• Z013426 – 6mm Twilight Crystal Czech Glass Fire Polish Beads
• Z008990 – 15mm Satin Gold Round Ear Posts (Silver option: Z008989)
• (2) TC00569 – 7mm Gold Nugget Spacer by TierraCast (Silver option: TC00034)
• Punch Pliers – A018918 OR TL00314

Directions:

1. Slide in through the middle and clamp down onto the wire end and piece.
2. Wrap wire around and up. Take off pliers and clamp both sides of the wire and pendant piece.
3. Bend wire to come across the top of the pendant.
4. You can take your sharpie or some fine point marker to mark the top to indicate where you will hope punch for the headpin.
5. Gently pull off wire. Take hole punch to the middle of that dot you made.
6. Slide on headpin, coming under the hole you punched.
7. Slide wire piece back on your pendant piece. Fold wire to the back.
8. Cut wire so that it overlaps with the other wire end.
9. Bend out the bottom end, fold in the top end and bend back the bottom end to overlap. Use nylon pliers or regular pliers to cinch them closed.
10. On the headpin, slide on nugget bead, gemstone and Czech bead and make a simple loop. Open loop and slide on post earring hole. Close loop. (As an option here, you can make a wrapped loop.)
11. Repeat all steps for other earring.

FB Live Video Tutorial

Check out the Video for a tutorial. Tutorial begins at around 8 Minutes.

(opens in a new tab)”>LINK TO VIDEO TUTORIAL HERE >

You can hear crashing waves when you wear these By the Sea Earrings. Ok, you might not hear them, but you will definitely want to wear these earrings to your next seaside adventure. It features the brilliant hue of Swarovski® Majestic Blue crystals and the luminescent sheen from the crystal pearls.

What you’ll need to make earrings:

• TC00113 – 14mm Small Spindle Shell Charm by TierraCast
• TC02680 – 13mm Tiny Seastar Charm by TierraCast
• (2) SW01448 – 10mm Crystal Pearlescent White Swarovski Pearl
• (2) SW01446 – 6mm Crystal Pearlescent White Swarovski Pearl
• (2) SW01723 – Swarovski® 4mm Majestic Blue Round Crystal
• (2) SW01725 – Swarovski® 8mm Majestic Blue Round Crystal
• TCZ0077 – Sterling Silver Earring Wire by Tierracast
• A019629 – 1 Inch Silver Plated 20 Gauge Eyepin

Directions:

1. Open eyepin loop, slide on a charm and close loop. Slide a 4mm Majestic Blue crystal on the eyepin and make a simple loop.
2. Open another eyepin loop, slide on loop you made in step 1 and close loop. Slide a 6mm Crystal Pearlescent on eyepin and make a simple loop.
3. Open another eyepin loop, slide on loop you made in step 2 and close loop. Slide an 8mm Majestic Blue crystal on the eyepin and make simple loop.
4. Open another eyepin loop slide on loop you made in step 3 and close loop. Slide a 10mm Crystal Pearlescent on eyepin and make a simple loop.
5. Open earwire loop and slide on loop you made in step 4. Close loop.
6. Repeat all steps for other earring.

Today’s tutorial digs into the love of licorice leather bracelets and how casual it plays with any fashion style. Embellish it with a bead tube and you have a fun piece of jewelry for a dazzling summer!

Items used in bracelet:

• SB00066 – 8/0 Black Opaque Seed Bead
• SB00423 – 11/0 Galvanized Yellow Gold Seed Bead
• SB03303 – Chalk Champagne DiamonDuo
• (8) SW00358 – Swarovski® 4mm Bacon Fuchsia AB 2X
• Z001106 – Gold Plated Magnetic Clasp For Licorice Leather
• A006585/A006587 – Crystal Fireline Thread
• Z011831 – Crystal Full Amber Honeycomb
• Z014871 – Turquoise Green Lumi Honeycomb
• (2) A015841 – 12mm Black Rubber O-Rings
• A015821 – Super New Glue
• A022052 – Matte Black Regaliz Licorice Leather

Pattern Tutorial

Get FULL and FREE pattern tutorial HERE.

Embrace summer boho jewelry with handmade thread beads. Today’s DIY would pair perfectly with a beachside cocktail!

What you’ll need for earrings:

• Ivory Thread Beads – Z017904
• 2 Inch Headpin with Ball – A019696
• Matte Gold Circles Connectors – Z014013 (2)
• TierraCast® Gold Earring Wire – TCZ0139
• 4mm Bicone Crystal Luminous Green – SW00574 (4)

Directions:

1. Slide the following onto a headpin: bicone crystal, thread bead and bicone crystal.
2. Make a wrapped loop, making sure to attach to a connector hole before completing wrapped loop. (You can also make a simple loop and attach to connector).
3. Open earwire loop, slide through other connector hole and close loop.
4. Repeat all steps for other earring.

This month’s trip is India. Find out how culturally rich and vibrant this country is from its colorful clothing to its exotic cuisine. Plus, bathe in the hues Swarovski suggests to inspire your India trip along with a DIY jewelry project for you to try.

India

One of the oldest civilizations in the world, India is a mosaic of multicultural experiences and rich heritage. Extending from the snow-covered Himalayan mountains to the tropical rain forests of the south, it is impossible to ignore India’s mesmeric conflation of the old and the new. Walking through the bustling city streets you are greeted by a diverse variety of cuisines, arts, crafts, faiths, and nature. Experiencing different textures, sounds and smells triggered the emotion that prompted these designs.

India – Swarovski Colors

• Indicolite
• Light Topaz (Note, we are using Light Colorado Topaz in DIY jewelry)
• Fuchsia

India Inspired DIY Jewelry

What you’ll need for earrings:

• 65mm Gold Plated Round Connector With Dot N Dash Tassel – Z017930
• 9mm Light Colorado Topaz Pear Cut Pendant – SW02491 (2)
• 8mm Indicolite Round Beads – SW02538 (2)
• 4mm Bicone Crystal Fuchsia – SW00126 (2)
• 11/0 Gold Seed Bead – SB00423
• 2 Inch Gold Eyepin – A019611
• Oval Jump Ring – A008801

Directions:

1. Open jump ring, slide on crystal pendant and through inner loop of connector. Close jump ring.
2. Open eyepin loop, slide through top loop of connector and close loop.
3. Slide on the eyepin a seed bead, 8mm round crystal, seed bead, 4mm bicone crystal and seed bead.
4. Open loop you made step 3, slide through earwire loop and close loop.
5. Repeat all steps for other earring.

Let’s continue our love of summertime jewelry with these cute Pearly Posh Earrings. With only 4 components, you can whip these up in no time!

What you’ll need:

• 65mm Silver Plated Round Connector With Ball Chain Tassel – Z017913 / Gold Z017918
• TierraCast Ear Wire – TCZ0077 / Gold TCZ0139
• 2 Inch Headpin – A019647 / Gold A019669
• (2) 12mm Swarovski Pearl – SW01449 / Shop All 12mm Pearls

Directions:

1. Slide a pearl onto a headpin and make a simple loop.
2. Open up pearl dangle loop and slide through inner loop of connector. Close loop.
3. Open earwire loop and slide on top loop of connector. Close loop.
4. Repeat all steps for other earring.

You know it’s summer when jewelry gets bigger and bigger. These pair of earrings consists of large 50mm rings from Nunn Design and accented with white enamel connectors. It’s going to be a grand Summer with these earrings.

What you’ll need for earrings:

• 50mm Grand Hoop from Nunn Design – Z008275 (2)
• 12mm White Enamel Round Connector – Z008744 (2)
• 5mm Oval Jump Rings – A008799
• TierraCast Earwire – TCZ0078

Directions:

1. Open jump ring, slide on ring and a loop on enamel connector. Close jump ring.
2. Open another jump ring, slide on other hole of enamel connector and earwire loop. Close jump ring.
3. Repeat all steps for other earring.

A fun new and old favorite, are these pair of summer-loving hoop earrings with Swarovski crystals and pearls.

What you’ll need:

• 6mm Round White Swarovski Pearl – SW00665 (4)
• 4mm Bicone Crystals, Light Amethyst – SW00195 (6)
• 6mm Bicone Crystals, Light Amethyst – SW00196 (2)
• 11/0 Silver Lined Amethyst Seed Bead – SB00339
• 3mm Gold Round Beads – Z001310
• Gold Plated Hoop – A013205
• Earwires – TCZ0148
• Gold Headpin – A019651
  Note: Directions are for making wrapped loops. If you prefer to make simple loops, we suggest using a harder gauge wire like A019658.

Directions:

1. Slide on a headpin; 4mm bicone and seed bead. Make a simple or wrapped loop. Make a total of 4 dangles.
2. Slide on a headpin; seed bead, 3mm round bead, pearl and seed bead. Make a simple or wrapped loop. Make a total of 4 dangles.
3. Slide on a headpin; seed bead, 3mm round bead, 6mm bicone, 3mm round, seed bead, 3mm round, 4mm bicone and seed bead. Make a simple or wrapped loop. Make a total of 2 dangles.
4. Cut the tab part of a hoop finding off.
5. Make a simple loop to one end of your hoop perpendicular to the loop of the hoop. Refer to previous Memory Wire Hoop Tutorial blog post.
6. Slide on the following to the hoop: 3mm round, step 1 dangle, 3mm round, step 2 dangle, 3mm round, step 3 dangle, 3mm round, step 2 dangle, 3mm round, step 1 dangle and 3mm round.
7. Slide other hoop end through loop you make in step 5 and roll back a simple loop. (Again, refer to the Memory Wire Hoop Tutorial blog post.)
8. Open ear wire loop and slide on hoop dangle. Close loop.
9. Repeat Steps 4-8 for other earring.

Have you tried metal stamping lately? It is a great time to start a new jewelry making adventure with metal stamping. Let’s start something easy with a heart blank and an adjustable chain necklace.

Items used in necklace:

• Heart Blank – Z014524
• 2mm Rollo Chain – CH01194 (2 feet)
• Clasp – A011535
• 5mm Jump Ring – A001528
• 4mm Upper Case Lollipop Metal Letters Stamping Set by ImpressArt – TL00161
• Black Sharpie and Paper Towels
• Tools: Hammer and Block
• Optional: Bracelet Guides

Directions:

1. Stamp your message on heart blank. Optional: Use bracelet guides to help center your message.
2. Mark in your stamps with a sharpie and wipe excess with a paper towel.
3. Determine the length of your necklace. wrap chain around the back of your neck and determine where you would want to situate your heart pendant. Cut length with cutters. And then cut chain piece in half.
4. Connect one chain piece with a jump ring to one side of your heart blank. Repeat to other chain and heart blank hole.
5. Add a jump ring to the left chain and close jump ring.
6. Add a jump ring to the right chain, while attaching the lobster clasp. Close jump ring.
7. Optional: you can also use an adjustable necklace sliding clasp instead of steps 3-6.

One of our happiest combinations are leather and gemstone. Throw in a fantastic large rhinestone clasp and this bracelet is one you’ll wear all the time.

Items used in bracelet sample:

• 1mm Leather Cord – Z015514
  Try other 1mm leather cord colors.
• 8mm Large Hole Gemstones – WAF8RDLH-M-8
  Try other selections of 8mm Large Hole Gemstones.
• Two Hole Oval Pewter Beads – Z008288
• Silver Plated Lobster Clasp with Rhinestones – Z014867
• 5.5mm Jump Rings – X003062

Directions

1. Cut the 2 meter of leather in half. Take one and cut in half again.
2. Take your two strands and slide both through rhinestone clasp loop and center. Make an overhand knot with all four strands, close to clasp loop.
3. Flare out your ends and determine which are your middle two strands and your side strands. Take one gemstone and slide through the two middle cords.
4. Decide your two left and right strands. Slide a gemstone through the two left strands and another gemstone to the two right strands.
5. Slide another gemstone through the two middle strands.
6. Take your two left strands and slide through one hole of oval bead. And take your two right strands and slide through other hole of oval bead.
7. Repeat Steps 3-6 one more time.
8. Repeat Steps 3-5 again.
9. Rhinestone clasp comes with an end connector with a small loop. Open jump ring, slide through small loop and close.
10. Make sure to wrap bracelet on your wrist to help determine where you want to situate your knot. Take your four ends and slide jump ring through all ends and do an overhand knot with the jump ring/ring connector within the knot.
11. Try on the bracelet and adjust knot you made previously if you need to make length shorter or longer. Cut leather ends as an option.

Video Tutorial

You can check out our previous Facebook LIVE episode where we demonstrate how to make this bracelet HERE.

We are channeling our wild side with these earrings, which consist of paperclip chain and tortoise acetate components.

What you’ll need:

• 26.5mm Jumbo Paper Clip Chain – CH01171 (Silver CH01170)
• 15mm Satin Hamilton Gold Hoop Post Earrings – Y003071 (Silver Y003012)
• 15mm Tortoise Two Hole Coin Connector – Z015021 (Shop other Colors)
• Tortoise Oval Ring Pendant – Z013574 (Shop other Colors)
• 8mm Gold Plated Jump Ring – A011523 (Silver A001530)
• E-6000 – A011455

Directions:

1. On the flat, rimmed side of hoop earring, add a E-6000 to the rim. Gently place the 15mm round acetate connector on the rim, making sure to align the acetate holes with the post vertically. Repeat to other post earring and acetate. Let both pieces dry for a few hours or until glue dries.
2. Gently open paperclip chain to have a link consisting of two links. Before closing the link, slide on oval acetate pendant. Close link.
3. Open jump ring, slide on other chain link and through bottom hole of acetate connector you glued in Step 1.
4. Repeat Steps 2 & 3 for other earring.

Imagine the sight of clear blue skies with these Blue ZigZag Tassel Earrings. It incorporates silver enamel pieces and large fan tassels!

What you’ll need for earrings:

• 8mm Post Earrings – Z001829 (Gold Z001831)
• White Mix Enamel Zigzag Connector Charm – Y009626 (Gold Z016108)
• 5.5mm Jump Ring – X003062 (Gold Z011522)
• Mint Flat Half Circle Tassel – Z007687 (Gold Z007698)

Directions:

1. Open jump ring, slide on tassel and loop on enamel connector. Close jump ring.
2. Open another jump ring, slide on other loop of enamel connector and through post earring loop. Close jump ring.
3. Repeat steps for other earring.

Your next summer DIY is easy to do when all you need are a few components to make this fabulous Long Straw & Acetate Tassel Necklace.

What you’ll need:

• Woven Straw Ring Pendant/Connector – Z019259
• 6mm Gold Jump Ring – Z011522
• Pearl Acetate Half Circle Pendant/Connector – Z012461
• 3.75 Inch Gold Plated Tassel – A013213
• Gold Plated Adjustable Rollo Chain Necklace Double Slide Clasp – Z010757

Tools you may need:

• Bead Reamer
• Alternative Otion: pointy Round Nose pliers or Awl

Directions:

1. Using the bead reamer or sharp awl, puncture a hole between the outer two rings of the woven straw component. Make another hole directly across the other side of the straw.
2. Open a jump ring, slide on chain tassel loo and through a straw component hole you made in Step 2. Close jump ring.
3. Open another jump ring, slide through other hole of the straw you made in Step 2 and through hole of the acetate (curved side). Close jump ring.
4. Open another jump ring and slide on other hole on acetate and through both of the jump rings of the adjustable necklace chain. Close jump ring.

You’re going to feel giddy with these pair of earrings! It’s all gold on gold, well gold-plated.

What you’ll need:

• (2) Gold Etched Teardrop – Z016726 (Silver Z016723)
• (2) Gold Etched Round – Z016675 (Silver Z016674)
• 8mm Gold-Plated Jump Ring – A011523 (Silver A001530)
• 3mm Gold-Plated Jump Ring – Z007861 (Silver Z007856)
• Gold Ear Wires – Z012071 (Silver Z012031)

Directions:

1. Open large jump ring, slide on teardrop hoop, round hoop and small jump ring. Close jump ring.
2. Open earwire loop and slide on small jump ring you added in step 1. Make sure that the teardrop hoop is situated on the backside of earwire. Close loop.
3. Repeat all steps for other earring.

You certainly make a silver version too with the following silver-plated components: Z007856, Z020042, Z016674 (2), Z016723 (2) & Z012031.

Today’s Peacock Tassel Necklace consists of some of our favorite products, acetate, chain, charms and tassels. Come make this lovely necklace today!

What you’ll need for necklace:

• Green Flat Tassel – Z011720
• 30mm Multi Color Acetate Connector – Z015040
• 13mm Gold Crescent Charm – Z016768
• Large Oval Gold Chain – A002735
• 2.5mm Gold Rollo Chain – A008183 (2 feet)
• 9mm Gold Jump Ring – A011525
• 6mm Gold Jump Ring – Z011522

Directions:

1. Cut large oval chain to consist of 11 links.
2. Open 9mm jump ring, slide on tassel and through one hole of acetate connector. Close jump ring.
3. Open another 9mm jump ring, slide through other hole of acetate, crescent charm and the middle link of large oval chain you cut in Step One. Close jump ring.
4. Open 6mm jump ring, slide on one end of large oval chain and through one end of rollo chain. Close jump ring.
5. Repeat step 4 to other chain ends. Note: you can chain the length of your necklace by shortening the rollo chain length.