We’ve got THREE easy projects using October’s Swarovski Psychology of Color: Sapphire. Design bold and confident jewelry with this hue!

Sapphire Ombré Bracelet

Items used in bracelet: CH00724 (10″), TC01897 (4), Z008576, SW00072 (15), SW02049 (8) and SW00001 (8). Tool: Magical Crimping Pliers

This bracelet is designed using our popular beading chain, 2mm crimps and slide on clasp. We’ve also used Magical Crimping Pliers to finish the crimps! Check out how to use this tool in our BeadSmith Magical Crimping Pliers blog post.

1. Slide beading chain through slide on clasp.
2. On the beading chain, slide on the following:
   Crimp tube, 3 clear crystal, 1 light sapphire, one clear, 2 light sapphire, 1 sapphire, 1 light sapphire, 11 sapphire, 1 light sapphire, 1 sapphire, 2 light sapphire, 1 clear, 1 light sapphire, 3 clear crystal and crimp tube.
3. Slide chain through slide on clasp in the same direction you did in step one.
4. Center beads and make a crimp on both ends of your crystals with magical crimping pliers. Make sure to leave a gap so that the crystals lay nicely and not too rigid on the chain.
5. Slide bracelet over the larges width of your hand and cut excess chain ends if needed.
6. Add a crimp to both ends of the beading chain and make a crimp with the magical crimping pliers.

Sapphire Icicle Earrings

Items used in earrings: SW00183 (2), SW00182 (4), SW00181 (2), SW02088 (2), SW00634 (2), TCZ0078, A001495, A019697, TC00006 (4) and TC00032 (2).

1. On headpin, slide on the following and make a simple loop:
   8mm bicone, 5mm spacer, 2 6mm bicone, 4mm spacer and 4mm sapphire bicone.
2. Open eyepin loop, slide on crystal dangle from Step 1 and close loop.
3. On the eyepin, slide on the following and make a simple loop:
   4mm sapphire, 4mm spacer, 4mm light sapphire and 3mm crystal.
4. Open earwire loop, slide one crystal dangle and close loop.
5. Repeat all steps for other earring.

Swarovski Sapphire Bracelet

Our friends at Swarovski: Create Your Style has this stunning bracelet made with classic cut crystal pendants!

What you’ll need for bracelet:

• Z009912 (4)
• 23mm Heavy Hammered Ring Sterling Silver Plated – Vintaj® PT198-040 (4)
• A013159 ( This bracelet substitutes the chain and clasp)
• A008807 
• X003062
• SW001762 (8)
• SW01779 (8)
• SW01796 (4)

Directions:

1. Using 7mm jump rings attach one 8mm Sapphire pendant to one Heavy Hammered Ring. Then attach one 10mm Sapphire pendant, one 14mm pendant, one 10mm pendant and one 8mm pendant onto the hammered ring. Make sure all pendants face forward. Repeat this step 3 more times and set aside.
2. Now using the large charms made in Step 1 attach them evenly along the bracelet. Do this with a 7mm jump ring and attach the Heavy Hammered Ring and Dotted Dap Circles together.